FIRST: Issueshttps://projects.ecoinformatics.org/ecoinfo/https://projects.ecoinformatics.org/ecoinfo/ecoinfo/favicon.ico?14691340362008-11-11T14:47:01ZEcoinformatics Redmine
Redmine Bug #3622 (Resolved): Moving to next wizard page loses status of pages being ignoredhttps://projects.ecoinformatics.org/ecoinfo/issues/36222008-11-11T14:47:01ZRyan McFallmcfall@hope.edu
<p>To replicate - ignore a page of an assessment, click Next to go to the next wizard page (not the next page of the PDF document), and then go back to the ignore text page. The page will not be shown as ignored.</p> Bug #3610 (Resolved): MorphoFIRST does not work with Morpho 1.6.2 jarhttps://projects.ecoinformatics.org/ecoinfo/issues/36102008-11-08T01:04:28Zben leinfelderleinfelder@nceas.ucsb.edu
<p>After upgrading to the changes made for 1.6.2 in Morpho, I cannot save documents to the remote server.<br />Awesome! I'll have to fix that....</p> Bug #3598 (Resolved): Set access control for question image fileshttps://projects.ecoinformatics.org/ecoinfo/issues/35982008-11-06T17:05:10Zben leinfelderleinfelder@nceas.ucsb.edu
<p>auxiliary (image) files from the QTI parsing should inherit the same access control rules as the assessment and assessment item metadata files.</p> Bug #3597 (Resolved): Set access control for response DATA filehttps://projects.ecoinformatics.org/ecoinfo/issues/35972008-11-06T17:03:46Zben leinfelderleinfelder@nceas.ucsb.edu
<p>similar to what we did in Morpho, the access control rules for data should be set independently of those set for the metadata. I believe we have a solid infrastructure for accommodating this in the UI.</p> Bug #3581 (Resolved): Vector rasterization page shows phantom move for old selectionhttps://projects.ecoinformatics.org/ecoinfo/issues/35812008-10-30T01:57:35ZRyan McFallmcfall@hope.edu
<p>On the vector rasterization page, using the BS 110 sample exam, if we select the image on page 5 and then move to page 7 and put the mouse cursor where the image from page 5 was being drawn, the cursor changes to a Move cursor, even though it shouldn't.</p>
<p>It's likely that we just need to listen to page change events from the PDF pane and clear the selector when this happens.</p> Bug #3570 (Resolved): Event forwarding doesn't work well when selection is in "selected" statehttps://projects.ecoinformatics.org/ecoinfo/issues/35702008-10-27T10:05:19ZRyan McFallmcfall@hope.edu
<p>When a selection has been selected, and then you try to click on the scrollbar, for example, to move the viewable window down, the selection becomes "unselected" and the event is not forwarded to the appropriate object. This is particularly problematic for large selections.</p> Bug #3544 (Resolved): Going back after encountering glass pane blocks GUI eventshttps://projects.ecoinformatics.org/ecoinfo/issues/35442008-10-22T14:55:02ZRyan McFallmcfall@hope.edu
<p>If you start with some file, then click next through to the vector rasterization page, and then try to go back and select a different file, the browse button is broken.</p>
<p>Likely in VectorImageRasterization.saveWizardData we need to disable the glass pane.</p> Bug #3540 (Resolved): Initial paint of new rectangle draws very tall rectangle before dragginghttps://projects.ecoinformatics.org/ecoinfo/issues/35402008-10-17T21:34:52ZRyan McFallmcfall@hope.edu
<p>When creating a new rectangle, the initial drag draws it with a very small width and very large height before the drag event fires and updates the corner of the rectangle.</p> Bug #3537 (Resolved): Cannot select page number at the bottom of page when selecting headers/footershttps://projects.ecoinformatics.org/ecoinfo/issues/35372008-10-16T21:17:03ZRyan McFallmcfall@hope.edu
<p>In particular, try the page number at the bottom of Exam3BS110s08dem.pdf.</p>
<p>Note that this may be related to Ben's problem where he couldn't select an image on a particular page.</p> Bug #3533 (Resolved): Mouse clicks ignored on the "pages containing vector images" list in Vector...https://projects.ecoinformatics.org/ecoinfo/issues/35332008-10-16T20:37:05ZRyan McFallmcfall@hope.edu
<p>It seems that mouse clicks are ignored when trying to choose a different item from the list of pages containing vector images. The buttons at the bottom of the PDF display component work correctly.</p> Bug #3521 (Resolved): Set access control for assessment data and metadata from within clienthttps://projects.ecoinformatics.org/ecoinfo/issues/35212008-10-09T04:45:13Zben leinfelderleinfelder@nceas.ucsb.edu
<p>There is no way to indicate who should be allowed to read/write assessment metadata or data. While the server can enforce these rules, they need to be set. The default is that only the owner has full permission.<br />It was decided that unlike EML, we would be changing the access control on the server rather than in the document. This decision was motived by a number of reasons, but mostly because the QTI specification would not allow for access control being stored in each XML file (and would that even make sense?)</p>
<p>The access control interface should look like the one in the current Morpho, but should have separate controls for setting the rights for metadata (assessment and assessment items grouped into one) vs data</p> Bug #3518 (Resolved): Allow [re]editing of question-level metadatahttps://projects.ecoinformatics.org/ecoinfo/issues/35182008-10-09T04:29:21Zben leinfelderleinfelder@nceas.ucsb.edu
<p>The content of the question items can be edited, but the concept categories, blooms taxonomy, etc... can only be edited upon initial parsing.<br />Need to expand the XML deserialization so that those metadata fields can be edited after the fact.</p> Bug #3456 (Resolved): Question prompts not displayed in LabelDataColumnshttps://projects.ecoinformatics.org/ecoinfo/issues/34562008-07-24T20:21:49ZRyan McFallmcfall@hope.edu
<p>Question text from parsed assessment is not displayed - possibly due to the migration from question prompt to response item prompt.</p> Bug #3348 (Resolved): introducing a validation error in document causes save to fail silentlyhttps://projects.ecoinformatics.org/ecoinfo/issues/33482008-05-30T18:31:00ZMatt Jonesjones@nceas.ucsb.edu
<p>I saved a valid EdML document locally and to metacat. I then went in and changed the document so that one of the date strings was ISO invalid (e.g., '4/2/2008'). I then selected 'Save...' from the menu, and selected both local and network. Morpho tries to save the document, fails due to validation errors, but fails silently with no error message to the user. The document is neither saved locally nor to metacat. The error message in the log reflects the validation problem:</p>
<p>MetacatUpload Exception in EdMLDataPackage!<br /><?xml version="1.0"?><br /><error><br />cvc-datatype-valid.1.2.2: '4/2/2008' is not a valid value of list type 'yearDate'.<br /></error></p>
<p>I can then go back to 'Save...' and save locally without a problem, producing a new version locally.</p>
<p>If I then take that new version and perform a 'File|Synchronize...' on it, then I get the inappropriate ID conflict error that is described in bug <a class="issue tracker-1 status-3 priority-2 priority-default closed" title="Bug: NullPointerException on previous from ReviewColumnAssignments (Resolved)" href="https://projects.ecoinformatics.org/ecoinfo/issues/3447">#3447</a>.</p> Bug #3347 (Resolved): invalid date string causes metacat upload errorhttps://projects.ecoinformatics.org/ecoinfo/issues/33472008-05-30T18:19:11ZMatt Jonesjones@nceas.ucsb.edu
<p>I created an EdML package in morpho, and saved it locally. On trying to 'File|Synchronize...' it with Metacat, I got an error dialog saying there was an ID conflict:</p>
<p>I never connected with this metacat, so the ID conflict is unlikely. Looking at the log, I saw a validation error on insert:</p>
<p>MetacatUpload Exception in EdMLDataPackage!<br /><?xml version="1.0"?><br /><error><br />cvc-datatype-valid.1.2.2: '4/2/2008' is not a valid value of list type 'yearDate'.<br /></error></p>
<p>It appears the date string wasn't ISO 8601 compliant, causing validation errors. By modifying the data string (to '2008-04-02') and then saving the package, it successfully saved both locally and to metacat.</p>
<p>So, I think the ID conflict dialog box was a red herring. It seems that we are catching errors too broadly from metacat. Only true ID conflicts should bring up that error.</p>