Project

General

Profile

Activity

From 05/19/2010 to 06/17/2010

06/17/2010

12:55 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
Postponing to sometime post 2.0. This does not affect the correct execution of the workflows. David Welker
12:53 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
So to sum up: Short of patching the ImageJ code, I'm not sure how to fix this. From my understanding the problem is j... Derik Barseghian
12:40 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I downloaded and tried w/ a newer ij,jar, 1.43u, but no luck, C:\Program Files\Kepler-2.0-RC5\ is still the path used... Derik Barseghian
11:54 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I'm able to replicate this on XP. It looks like IJ_Prefs.txt gets written to the project dir (C:\Program Files\Kepler... Derik Barseghian
11:41 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
This seems relevant:
http://imagej.588099.n2.nabble.com/Error-when-closing-ImageJ-td3004156.html
Derik Barseghian

06/16/2010

05:38 PM Bug #5052 (Resolved): default file open directory of Kepler 2.0
If I remember correctly, the default directory for 'File-->Open File...' menu item is getting-started directory in Ke... jianwu jianwu
05:19 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I still saw it in RC 5. Re-open it.
In my Windows 7 64 bit machine, the failure does *not* occur if
I start Kepler u...
jianwu jianwu
02:21 PM Bug #5051: Semantically annotate during Save Archive a workflow with remote data set Error
This is the trace. Note also warning at top about cloning:
trying to clone myworkflow but you can't clone this objec...
Derik Barseghian
01:48 PM Bug #5051 (Resolved): Semantically annotate during Save Archive a workflow with remote data set Error
If you search for a remote data set, drag it out to canvas, then Save Archive, and then Semantically Annotate the wor... Derik Barseghian
09:22 AM Bug #5024: Uninstaller couldn't delete the rc3 folder on windows 7
This should be fixed. David Welker
09:20 AM Bug #5008: Research Copyrights before 2.0.0 release.
Finished. David Welker

06/15/2010

05:59 PM Bug #5032: Workflow Run Manager - ability to connect to different prov stores from gui actions
I've got report layouts and instances displaying now when a workflow run manager is connected to a remote provenance ... Derik Barseghian
05:59 PM Bug #5050 (Resolved): Automatically filter workflow run manager runs based on selected workflow
In Figure 6 ( https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineering-view-plan... Derik Barseghian
05:54 PM Bug #5049 (Resolved): Prompt for credentials when connecting to remote kepler server
At some point in Figure 6( https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineer... Derik Barseghian

06/14/2010

02:57 PM Bug #5048 (In Progress): Can't clean (or do other build system operations) offline
When I try to run "ant clean" from the sensor-view suite, I get the exception below. The module kepler-2.0.^ is not r... Sean Riddle
01:39 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #13)
> (In reply to comment #12)
> > (In reply to comment #11)
> > > Sounds good. Can you poke a...
debi staggs
01:12 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #12)
> (In reply to comment #11)
> > Sounds good. Can you poke around looking for any other simi...
Derik Barseghian
12:21 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #11)
> Sounds good. Can you poke around looking for any other similar problems -- e.g.
> what ha...
debi staggs

06/11/2010

04:26 PM Bug #5042: create span simulator
The simulator now generates data for each sensor, and you can control the sampling parameters. Daniel Crawl
11:33 AM Bug #5047: Rename the tagging docs tagging.pdf
I don't think kepler-tagging-ui.pdf is the documentation. I think it's some early design documents. They should proba... Sean Riddle
11:29 AM Bug #5047 (Resolved): Rename the tagging docs tagging.pdf
The tagging docs (tagging-2.0 > docs) need to be named tagging.pdf instead of kepler-tagging-ui.pdf
This is so tha...
debi staggs
10:53 AM Bug #5043: Help => Modules Documentation menu not in 2.0
Fixed Now. debi staggs

06/10/2010

05:36 PM Bug #5032: Workflow Run Manager - ability to connect to different prov stores from gui actions
Making a little progress on this bug. As a test I've added a temporary jbutton to the WRM that connects to provenance... Derik Barseghian
05:19 PM Bug #5033: Workflow Run Manager - Allow multiple instances of WRM in one Kepler instance
I've made some progress on this bug, I've created a WorkflowRunManagerManager (could use a rename) to manage the now ... Derik Barseghian
03:03 PM Bug #5031: Fail to switch to other suite from module manager of Kepler-2.0-RC3
It looks like this is working in RC4 on Lei's machine under Windows Vista too. The origins of this problem remain unk... David Welker

06/09/2010

06:11 PM Bug #5031: Fail to switch to other suite from module manager of Kepler-2.0-RC3
David, I went to test this on RC4 w/ Vista but the only suite listed at the moment under Available Suites: is kepler-... Derik Barseghian
03:22 PM Bug #5042: create span simulator
I've implemented part of the simulator. You can start it by running 'ant spansim' in sensor-view/.
Yet to do:
* dat...
Daniel Crawl
01:38 PM Bug #4997: SEEK/garpModel_ImageJ.xml has an exception while opening
Closing. Workflows moved to unsupported. David Welker
01:10 PM Bug #5017: ReportLayout LSID and referral list should be maintained
Sounds good. Can you poke around looking for any other similar problems -- e.g. what happens when you have multiple c... Derik Barseghian
01:01 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #9)
> (In reply to comment #8)
> > Yes, it's not sufficient because scenarios like comment#6 are...
debi staggs
12:38 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #8)
> Yes, it's not sufficient because scenarios like comment#6 are still possible.
>
> I think...
debi staggs
11:33 AM Bug #5045 (In Progress): Add a menu to add and configure new remote kepler servers
Figure 6 (https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineering-view-plans ) ... Derik Barseghian

06/08/2010

05:25 PM Bug #5044: Can't insert null record using Database Writer actor
Corinna reports this works for her mysql DB too. Closing. Derik Barseghian
01:40 PM Bug #5044: Can't insert null record using Database Writer actor
Should be fixed in trunk at r24764.
If token is nil, now inserting null into DB. I've (only) tested this with a loca...
Derik Barseghian
11:37 AM Bug #5043: Help => Modules Documentation menu not in 2.0
(In reply to comment #4)
> (In reply to comment #3)
> > I've retried with a fresh checkout of 2.0 and the menu item i...
debi staggs
11:06 AM Bug #5043: Help => Modules Documentation menu not in 2.0
(In reply to comment #3)
> I've retried with a fresh checkout of 2.0 and the menu item is missing. I also
> retried a...
debi staggs
10:48 AM Bug #5043: Help => Modules Documentation menu not in 2.0
I've retried with a fresh checkout of 2.0 and the menu item is missing. I also retried after deleting KeplerData and ... Derik Barseghian
10:32 AM Bug #5043: Help => Modules Documentation menu not in 2.0
I just checked rc4 and the moudles documentation menu item is available as expected in it as well. debi staggs
10:11 AM Bug #5043: Help => Modules Documentation menu not in 2.0
Derik, are you talking about release candidate 4 or are you talking about what is currently in svn in kepler/releases... debi staggs
10:57 AM Bug #5017: ReportLayout LSID and referral list should be maintained
Yes, it's not sufficient because scenarios like comment#6 are still possible.
I think the best approach is to roll t...
Derik Barseghian

06/07/2010

05:33 PM Bug #5044 (Resolved): Can't insert null record using Database Writer actor
User reports being unable to insert null record into database using Database Writer's input port -- I don't believe t... Derik Barseghian
05:20 PM Bug #5043 (Resolved): Help => Modules Documentation menu not in 2.0
Under the 2.0 branch and RC4, I don't see the Modules Documentation menu item. This menu item exists on trunk. I trie... Derik Barseghian
04:36 PM Bug #5042 (Resolved): create span simulator
Create a SPAN simulator that uses the SPAN control protocol to start/stop sensors, and change sampling rates. Additio... Daniel Crawl
04:31 PM Bug #5041 (Resolved): display recent data next to icon
Display the most recent data value and timestamp next to each sensor icon while "running" an engineering view workflow. Daniel Crawl
04:15 PM Bug #5017: ReportLayout LSID and referral list should be maintained
So, just to be sure that I am understanding you correctly -- are you saying that using the ReportLayoutKAREntryHandle... debi staggs
03:42 PM Bug #5017: ReportLayout LSID and referral list should be maintained
Hey Debi, while it may be ok to only increment the LSID whenever a report layout is saved, one of the ways a report l... Derik Barseghian
02:50 PM Bug #5017: ReportLayout LSID and referral list should be maintained
The report layout LSID is now incremented whenever the user saves a KAR file, but only if it is in the local namespac... debi staggs
03:59 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
The files had been moved in 2.0 but not trunk. I moved the ones in trunk. Derik Barseghian
01:43 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
Why was this closed? From what I can tell Help => Modules Documentation is still broken because the files haven't bee... Derik Barseghian
02:51 PM Bug #4981: RIO pdfs don't show up in the Component Library
Re-targeting for now, based on our discussion during the REAP meeting today. debi staggs
12:35 PM Bug #4544: Enter key in Report Designer title invokes a search
This shouldn't be that hard to fix. It actually sounds like the search field is being greedy. Can the KeyEventListene... ben leinfelder
12:29 PM Bug #4544: Enter key in Report Designer title invokes a search
No need to change anything on this bug IMO, it was filed with Importance 'minor' and targeted for 2.X.Y. Derik Barseghian
12:23 PM Bug #4544: Enter key in Report Designer title invokes a search
I have looked at this again, and following the steps you describe, I can see this in the GUI. However, I don't think... debi staggs
11:56 AM Bug #4544: Enter key in Report Designer title invokes a search
This still happens for me on trunk, on mac and windows. A way to replicate that shows in the gui:
Type sdf into the S...
Derik Barseghian
06:59 AM Bug #4544: Enter key in Report Designer title invokes a search
This is no longer happening for me. debi staggs
12:16 PM Bug #4647: Write documentation for Reporting in the style of Kepler Docs
Closing this for now, although with the disclaimer that there still may be some small changes or additions. debi staggs
09:08 AM Bug #4524: no prompt to save a changed report
Figured out what is happening here. Ptolemy > gui > Top _queryForSave method is being used instead of the ReportDes... debi staggs
08:49 AM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
Based on Deriks comments, re-targeting to wrp-2.x.y for now. debi staggs
08:18 AM Bug #4324: ptII/module-info/revision.txt not being updated
ptolemy/revisions.txt is not being automatically updated so I'm reopening this.
From the svn logs, it looks like the...
Christopher Brooks
07:09 AM Bug #4660: Clicking in a section header highlights all the text.
Fixed. debi staggs
07:08 AM Bug #4548: string tokens with newlines print the escape sequences
Re-targeting for post 2.0. debi staggs
07:06 AM Bug #4526: multi-line entries can be put into text items in reports, but they are displayed on a single line
This is desired behavior, as we do not want to assume that the user would like a new line whenever the text wraps in ... debi staggs

06/04/2010

03:49 PM Bug #4741: create icons for engineering view components
also need a different color/icon to represent sending commands to SPAN Daniel Crawl
03:45 PM Bug #5040: create views, tabs, configuration
done Daniel Crawl

06/03/2010

06:22 PM Bug #5040: create views, tabs, configuration
I've created stub tabs and the configuration.xml.
Yet to do:
set the canvas name to be "Site Layout" instead of "Wo...
Daniel Crawl
01:14 PM Bug #5040 (Resolved): create views, tabs, configuration
The view and tab panes for the engineering view need to be created (for now, they can be empty), along with a configu... Daniel Crawl
01:20 PM Bug #4754: update metacat workflow execution scheduler
Hi Jing,
This sounds great. Do you want to create a new kepler module for the client jar and scheduler gui (bug 4753...
Daniel Crawl

06/02/2010

01:12 PM Bug #4997: SEEK/garpModel_ImageJ.xml has an exception while opening
I am moving this workflow and all similar workflows that do not work into an unsupported directory. It will be up to ... David Welker
01:11 PM Bug #5031: Fail to switch to other suite from module manager of Kepler-2.0-RC3
We will look more at this bug after release candidate 4. David Welker
01:10 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
Closing this bug. We may need to re-open this bug or a new bug in order to deal with the change in location of docume... David Welker
12:05 PM Bug #4754: update metacat workflow execution scheduler
The workflow execution scheduler was separated from metacat. Now it stays at https://code.ecoinformatics.org/code/wfs... Jing Tao
11:00 AM Bug #5016: mirror dataturbine via command line
I've created a program to do this: util.MirrorDT. Daniel Crawl

06/01/2010

02:11 PM Bug #4762: create gui to control sensor from kepler
For now, use the existing actor configuration dialog to control components.
If this is not sufficient, we can design...
Daniel Crawl
02:10 PM Bug #4743: create gui to edit documentation metadata for component
For now, use the existing actor configuration dialog to edit or add metadata for components.
If this is not sufficie...
Daniel Crawl
01:10 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
Typo in Comment#4, the new properties are not <modulename>.demodir, but <modulename>.workflowdir.
I've updated all t...
Derik Barseghian
10:48 AM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
(In reply to comment #5)
> Changing the "documentation" folder to "docs." Also, putting it at the top
> level of a mo...
Derik Barseghian
11:18 AM Bug #4983: cannot run kepler.sh in RC2
Thanks for taking a look at this.
One issue is that by changing directories to the script directory,
starting java an...
Christopher Brooks
11:08 AM Bug #4983: cannot run kepler.sh in RC2
Okay, patched in branch as well. Sean Riddle
11:05 AM Bug #4983: cannot run kepler.sh in RC2
Yes, build instructions point to: https://code.kepler-project.org/code/kepler/releases/release-branches/build-area-2.0/ Derik Barseghian
10:59 AM Bug #4983: cannot run kepler.sh in RC2
Fixed in r24623 in trunk build-area (script works from any directory on a Mac). Is there a separate 2.0 build-area th... Sean Riddle

05/30/2010

01:15 AM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
Changing the "documentation" folder to "docs." Also, putting it at the top level of a module, rather than within the ... David Welker

05/28/2010

08:51 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
This is mostly done now in trunk and 2.0.
After futher discussion w/ David and Sean, we decided to change to copy al...
Derik Barseghian
03:39 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
Not mentioned in the bug but the idea was to copy all modules' module/resources/demos dirs. But we've changed the pla... Derik Barseghian
02:40 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
Oh, I nearly forgot. We need a docs directory to.
(3) For each module in the current set:
-- Check if there is a doc...
David Welker
01:28 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
Proposed solution:
(1) For each module in the current set:
-- Check if there is a demo directory. (This should be de...
David Welker
03:22 PM Bug #5028: dataturbine overwrites recent data when frequently detaching
This has been fixed in DT V3.2B4. Daniel Crawl
12:17 PM Bug #4983: cannot run kepler.sh in RC2
I have a script that works for kepler.sh. I haven't integrated it into the startup-script target yet, though. It's at... Sean Riddle
11:30 AM Bug #5036 (New): All workflows that do not work should be moved.
I am moving all workflows that do not work to an unsupported directory so that people are not surprised when they try... David Welker
10:54 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
Fixed. David Welker
08:35 AM Bug #5022: 2.0-RC3 Windows installer creates Kepler 2.0-RC2 start menu choice, not Kepler 2.0-RC3
Fixed. The icon is now showing up properly David Welker

05/27/2010

09:39 PM Bug #5034 (Resolved): Need to generalize copying workflow demos from areas other than outreach.
Lei Dou at UC Davis is working on a module that extends Kepler functionality. It, like many other modules, has workfl... David Welker
09:31 PM Bug #5031: Fail to switch to other suite from module manager of Kepler-2.0-RC3
This is an important bug that should block the release. David Welker
11:40 AM Bug #5031 (Resolved): Fail to switch to other suite from module manager of Kepler-2.0-RC3
In the newly installed Kepler-2.0-RC3 on windows vista, I want to switch to comad-exp-1.0.0 suite from the default ke... Lei Dou
02:14 PM Bug #5030: RExpression2 actor will fail if the libs are not found
I've tried to run/install JRI on a 64 bit windows machine.
The JRI examples that they ship seem to work and I can get...
ben leinfelder
12:54 PM Bug #4755: update workflow run manager and reporting to display runs of sensor workflows
Two subtasks of this bug are:
1) WRM must be able to dynamically connect to and show runs in remote provenance stores...
Derik Barseghian
12:50 PM Bug #5033 (Resolved): Workflow Run Manager - Allow multiple instances of WRM in one Kepler instance
As Figure 6 implies, each Kepler window has a WRM that may be showing run results on a different server:
https://kep...
Derik Barseghian
12:46 PM Bug #5032 (Resolved): Workflow Run Manager - ability to connect to different prov stores from gui actions
WRM must be able to dynamically connect to and show runs in remote provenance stores based on what a user has clicked... Derik Barseghian

05/26/2010

03:08 PM Bug #4985: problem with workflows using Rexpression on Windows XP
i'll try to make 64 bit libs for JRI ben leinfelder
02:16 PM Bug #4985: problem with workflows using Rexpression on Windows XP
Fixed the 2 workflows, and tested on 2.0 and trunk on mac, and 2.0 on XP, and they work. I'm going to move the concer... Derik Barseghian
02:12 PM Bug #4985: problem with workflows using Rexpression on Windows XP
(In reply to comment #5)
> (In reply to comment #1)
>
> 2. The RExpression2 (JRI-based) actor will fail if the libs ...
jianwu jianwu
01:51 PM Bug #4985: problem with workflows using Rexpression on Windows XP
(In reply to comment #1)
1. Derik will change the workflows to point to the DEMODIR path.
2. The RExpression2 (JRI-...
ben leinfelder
02:41 PM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
(In reply to comment #10)
> (In reply to comment #9)
> > (In reply to comment #8)
> > > (In reply to comment #7)
> > ...
Derik Barseghian
12:39 PM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
I agree that we should close this bug. I am gong to do so, but if anyone has any objections, feel free to re-open it.... David Welker
02:20 PM Bug #5030 (New): RExpression2 actor will fail if the libs are not found
Creating a new bug from discussion originating in bug#4985, relevant sections posted below:
Jianwu said:
I also t...
Derik Barseghian
01:35 PM Bug #4972: Write documentation for workflow-run-manager module
done Derik Barseghian
01:34 PM Bug #5014: Add documentation to resources for the Workflow Run Manager module
done Derik Barseghian

05/25/2010

06:55 PM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
(In reply to comment #9)
> (In reply to comment #8)
> > (In reply to comment #7)
> > > Error message about R not bein...
Derik Barseghian
05:52 PM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
(In reply to comment #8)
> (In reply to comment #7)
> > Error message about R not being on path should properly show ...
Derik Barseghian
04:27 PM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
(In reply to comment #7)
> Error message about R not being on path should properly show now on trunk at
> r24573 and ...
Derik Barseghian
04:23 PM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
Error message about R not being on path should properly show now on trunk at r24573 and 2.0 at r24576. Leaving open f... Derik Barseghian
12:01 PM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
After adding R to my PATH these workflows work for me as well. I'm going to take a look at the RExpression actor to s... Derik Barseghian
10:38 AM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
After adding R into the path, those two workflows work.
So we have to make sure R was added into the path on my wind...
Jing Tao
10:27 AM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
It seems that R is not in the path.
C:\Users\tao>R --no-save
'R' is not recognized as an internal or external comman...
Jing Tao
04:25 PM Bug #4985: problem with workflows using Rexpression on Windows XP
Infinite loop problem is fixed and error message about R not being on path should properly show now on trunk at r2457... Derik Barseghian
02:26 PM Bug #5022: 2.0-RC3 Windows installer creates Kepler 2.0-RC2 start menu choice, not Kepler 2.0-RC3
I am re-opening this bug. Testing reveals that this is not fixed yet. David Welker
12:50 PM Bug #5013: Add documentation to resources for Tagging module
Done. Sean Riddle
12:49 PM Bug #4971: Write documentation for tagging module
Wrote documentation and committed a PDF to trunk and branch and a Word docx to kepler-docs. Sean Riddle
11:52 AM Bug #4869: changes made to workflows during dialogs before committing (Edit Parameters/Cancel)
Sean Riddle posted bug 5029, which is a duplicate of this bug, so I closed 5029
Below is post:
> 1) Double-click on ...
Christopher Brooks
11:50 AM Bug #5029: Parameter changes can be committed without clicking the commit button
This is a duplicate of 4869. Fixing this before Kepler-2.0 is not
advised as the problem involves modal dialogs. A ...
Christopher Brooks
11:25 AM Bug #5029 (Resolved): Parameter changes can be committed without clicking the commit button
1) Double-click on an actor and change a parameter.
2) Click the add button to trigger the "add parameter" dialog
3...
Sean Riddle

05/24/2010

07:12 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
This should be fixed.
I will need a person with a Windows machine to re-download the RC3 installer (which has chang...
David Welker
05:10 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I think I have figured out what was causing this. It appears to be an incorrect path in the workflow. I have updated ... David Welker
10:16 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I re-tested it. In my Windows 7 64 bit machine, the failure does *not* occur if I start Kepler using right-click menu... jianwu jianwu
09:42 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I can reproduce this failure on a Windows 2003 machine where Kepler
was installed as admin and I'm logged in as a non...
Christopher Brooks
06:48 PM Bug #5022: 2.0-RC3 Windows installer creates Kepler 2.0-RC2 start menu choice, not Kepler 2.0-RC3
This appears to be fixed using the latest incarnation of the RC3 installer, which I am uploading now. Closing this bug. David Welker
06:44 PM Bug #5020: 2.0-RC3 installer: R Kepler Module is not optional
I agree that there is no reason to bother with this window. But it is a very minor issue and I do not think we should... David Welker
03:17 PM Bug #5028 (Resolved): dataturbine overwrites recent data when frequently detaching
When disconnecting from a DT server, a source must "detach" so that any uploaded data remain persistent. However, det... Daniel Crawl
03:08 PM Bug #4760: software to transfer sensor data from SPAN to DT
I've created a program to do this: util.SpanToDT. Daniel Crawl
02:22 PM Bug #5027: Users should be able to build installers for the Kepler-2.0 branch
I agree and think this is a good RFE.
However, the process of creating an installer at this point has too many movi...
David Welker
10:32 AM Bug #5027 (New): Users should be able to build installers for the Kepler-2.0 branch
Kepler users should be able to build installers so that they may deploy
a shrinkwrapped installation to other users....
Christopher Brooks
11:46 AM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
On my XP box w/ R 2.10.1:
00-StatisticalSummary - I have a different error when trying this workflow, it's described ...
Derik Barseghian
09:50 AM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
I can run these demos as a non-admin user under Windows 2003 Server R2
with a Kepler-2.0-RC3 installation that was in...
Christopher Brooks
11:44 AM Bug #4985: problem with workflows using Rexpression on Windows XP
Ben tried to replicate on his XP box, and my problem with an infinite loop in _read didn't happen to him. It's still ... Derik Barseghian
08:42 AM Bug #4983: cannot run kepler.sh in RC2
The acceptance criteria to close this bug would be for
"ant startup-script"
to create a kepler/kepler.sh script th...
Christopher Brooks

05/23/2010

10:48 PM Bug #5021: release date is wrong in installer readme
Fixed in the latest incarnation of the RC3 installer. David Welker
09:30 PM Bug #4983: cannot run kepler.sh in RC2
Should I close this bug? David Welker
09:29 PM Bug #4994: ant installer fails with "Invalid directory 'dir' ... outreach-2.0.0/resources"
Running "ant" to list the commands no longer lists the ant installer command. Closing this bug. David Welker
09:28 PM Bug #4997: SEEK/garpModel_ImageJ.xml has an exception while opening
The maintainer of this workflow is going to need to fix this. I have fixed the paths and put in different names to av... David Welker
08:51 PM Bug #5025: Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
Hmm... this isn't a problem for me with my Mac running R 2.10.1. Who else can reproduce this? David Welker
08:47 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I am unable to reproduce this error on my mac. Who can reproduce this? David Welker

05/21/2010

01:05 AM Bug #4524: no prompt to save a changed report
The steps I'm taking are as described in comment#7. Yes, this happens in 2.0 as well. If it's not happening for you, ... Derik Barseghian

05/20/2010

09:20 PM Bug #3072: Security issues with distributed execution
It is fixed at version 24539. When a slave is started using startWithExecutionPolicy command, it will use master-slav... jianwu jianwu
08:33 PM Bug #4524: no prompt to save a changed report
I am still not seeing the behavior that you describe. This was however, a behavior that was present in a previous ve... debi staggs
04:42 PM Bug #4524: no prompt to save a changed report
Things still behave as described in comment7 at r24535 in reporting trunk for me, on both os X and windows XP. Derik Barseghian
11:55 AM Bug #4524: no prompt to save a changed report
Revision 24531 is the most recent, I have updated the files in both trunk and in the 2.0 branch. In this revision. De... debi staggs
11:18 AM Bug #4524: no prompt to save a changed report
This is at r24529 on reporting trunk. You haven't made changes post that revision that are checked in. Are you not se... Derik Barseghian
11:12 AM Bug #4524: no prompt to save a changed report
Can you please tell me what revision number you have for this ? What you are describing sounds like an old version. ... debi staggs
06:27 PM Bug #4647: Write documentation for Reporting in the style of Kepler Docs
I made a significant number of changes and committed to r1254 in kepler-docs, and 24536 (trunk) and r 24537 (2.0). Yo... Derik Barseghian
02:12 PM Bug #4647: Write documentation for Reporting in the style of Kepler Docs
O.K. that explains it. I had a local document that I used to create the document now currently named reporting.docx,... debi staggs
11:33 AM Bug #4647: Write documentation for Reporting in the style of Kepler Docs
The plan hasn't changed.
As mentioned, I made fixes and additions to wrp.docx (r1249). Afaik this doc only exists in...
Derik Barseghian
11:09 AM Bug #4647: Write documentation for Reporting in the style of Kepler Docs
I would like to know what version of this you have.
Also, where in svn have you been getting your current version ...
debi staggs
05:45 PM Bug #5026 (Resolved): Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I found it when I executed the workflow: KeplerData\Kepler-2.0-Demos\demos\getting-started\03-ImageDisplay.xml on Win... jianwu jianwu
03:21 PM Bug #5025 (Resolved): Couldn't run the workflows 00-StatisticalSummary and 08-CommandLine_2
On windows vista (With R 2.9) and windows 7 (With R 2.10.1), I got the errors:
1(00-StatisticalSummary):
ptolem...
Jing Tao
03:01 PM Bug #5024 (Resolved): Uninstaller couldn't delete the rc3 folder on windows 7
Uninstaller couldn't remove the rc3 folder in Program File on Windows 7 (Vista). But it can remove desktop icon and k... Jing Tao
02:28 PM Bug #4985: problem with workflows using Rexpression on Windows XP
My problem in comment 1-- workflows using RExpression on XP never finish executing -- is still an issue in RC3 and on... Derik Barseghian
02:20 PM Bug #5023: The desktop icon of rc3 is a blank page on windows vista
bug #5023 is a duplicate of bug #5022 Christopher Brooks
02:03 PM Bug #5023: The desktop icon of rc3 is a blank page on windows vista
This happens on windows xp as well. Also, the icon and start menu call it RC2 rather than rc3. Jing Tao
02:00 PM Bug #5023 (Resolved): The desktop icon of rc3 is a blank page on windows vista
The icon is a blank page on windows. It was a issue on rc2 as well. Jing Tao
01:09 PM Bug #4983: cannot run kepler.sh in RC2
This works for me:
--start--
#!/bin/sh -x
# This script starts Kepler.
# Run with -h to see all command-line option...
Christopher Brooks
04:50 AM Bug #4983: cannot run kepler.sh in RC2
This bug is still true in RC 3. If you are in the same directory as kepler.sh or kepler.bat, it works, but if not, it... David Welker
12:56 PM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
I spent a bit looking into this last night. I was able to keep the report layout from refreshing in the window in whi... Derik Barseghian
12:52 PM Bug #5022 (Resolved): 2.0-RC3 Windows installer creates Kepler 2.0-RC2 start menu choice, not Kepler 2.0-RC3
With the Kepler-2.0-RC3 Windows installer, the shortcut in Start->All Programs
->Kepler is Kepler 2.0-RC2, not Keple...
Christopher Brooks
12:34 PM Bug #4993: Kepler-2.0 cannot be built under windows because of apple-extensions
Closing.
I verified that I can build the Kepler-2.0 branch under Windows Server 2003.
Christopher Brooks
12:12 PM Bug #5017: ReportLayout LSID and referral list should be maintained
It might also be nice to see who originally created and who contributed to a report layout, esp in a 'publication kar... Derik Barseghian
11:55 AM Bug #5017: ReportLayout LSID and referral list should be maintained
Hmm, I'm trying to think of how we'd use the "provenance of the report layout". I suppose that could be useful for un... ben leinfelder
11:47 AM Bug #5017: ReportLayout LSID and referral list should be maintained
They're still not NamedObjs. Unfortunately the constructor for NamedObjIdReferralList needs a NamedObj. Aaron recomme... Derik Barseghian
11:34 AM Bug #5017: ReportLayout LSID and referral list should be maintained
are report layouts now NamedObjs or something?
Where is the referral list stored if not?
ben leinfelder
11:42 AM Bug #5021 (Resolved): release date is wrong in installer readme
change the date to the actual release date. it's set as may 12 right now. Chad Berkley
11:32 AM Bug #5019: R_output_example.xml fails
changed the workflow to use different columns (of doubles) for the array plotter input. ben leinfelder
04:29 AM Bug #5019 (Resolved): R_output_example.xml fails
The R_output_example.xml which is in /KeplerData/Kepler-2.0-Demos/demos/R/ fails to run properly. David Welker
10:28 AM Bug #5020 (Resolved): 2.0-RC3 installer: R Kepler Module is not optional
When installing Kepler-2.0-RC3, I'm presented with
two choices:
Kepler
R Kepler Module
Both are required, I can...
Christopher Brooks
09:03 AM Bug #4994: ant installer fails with "Invalid directory 'dir' ... outreach-2.0.0/resources"
In the Kepler-2.0 tree.
Running "ant" yields
[exec] installer Builds the Kepler installe...
Christopher Brooks
04:35 AM Bug #4994: ant installer fails with "Invalid directory 'dir' ... outreach-2.0.0/resources"
At this point, building installers is meant for releases. Later on, I would like to automate the entire install proce... David Welker
04:44 AM Bug #4984: user mailing list is wrong
The mailing list on the installer is now correct. The date is off, saying May 12 instead of May 20. However, rebuildi... David Welker
04:40 AM Bug #4987: RC2 cannot find R pkg
R is no longer installed, but must be installed manually.
If a workflow that depends on R fails because R is not pre...
David Welker
04:38 AM Bug #4991: Kepler-2.0-RC2 fails to start for a non-admin user after admin install
This should now work. David Welker
04:37 AM Bug #4992: In a shared installation, how does the user get the demo?
The demos are now copied to the users home directory upon start-up if they are not already there. David Welker
04:33 AM Bug #4997: SEEK/garpModel_ImageJ.xml has an exception while opening
This is still occurring in RC3. I think it is a problem with paths that is probably easily fixed. I will try to take ... David Welker
04:25 AM Bug #4996: 2.0-RC2 demos don't work
These demos now work. There might be others that are failing under RC3, but I have tested all of the demos in getting... David Welker
04:22 AM Bug #5005: regular user couldn't start kepler after it was installed on windows 7
Since published.txt and present.txt are now stored and written to the cache, this bug now should be fixed. Closing. David Welker

05/19/2010

04:37 PM Bug #5015: Export of runs contain different, and missing or extra reporting items now
Closing, opened bug#5018 for issue described above. Derik Barseghian
04:36 PM Bug #5018 (New): Items with the same LSID show with the same name in the Components Library
If you have two items within a KAR that have different filenames but the same LSID, they show as one item in the comp... Derik Barseghian
04:22 PM Bug #4969: Exported run-kar puts a roml at root of Components tree
I can't find the replication procedure for this, or it's no longer happening. Please reopen if you see this. Derik Barseghian
04:09 PM Bug #4524: no prompt to save a changed report
This doesn't work for me. If I design a workflow and report layout, save it to kar, change the report layout, and the... Derik Barseghian
03:58 PM Bug #4647: Write documentation for Reporting in the style of Kepler Docs
There are many errors in this documentation. It looks like my corrections and additions to the former wrp.docx (r 124... Derik Barseghian
03:08 PM Bug #5017 (Resolved): ReportLayout LSID and referral list should be maintained
When a user changes a reportLayout, its LSID revision should increment.
When a user changes a reportLayout with an L...
Derik Barseghian
02:59 PM Bug #4977: Can't associate multiple sets of reporting artifacts in one kar with different executions
was fixed at r24481 (trunk) and r24483 (2.0). Made reporting items depend on run when exporting a run-kar, and on imp... Derik Barseghian
01:28 PM Bug #4281: ant update produces message about running svn cleanup
This bug is now affecting me under Mac OS X. I've also seen it under
Windows Server 2003.
svn update yields:
[upda...
Christopher Brooks
 

Also available in: Atom