Metacat UNIX Installation Instructions
KNB Home Data People Informatics Biocomplexity Education Software

***Disclaimer***

These installation instructions are meant for a systems administrator/DBA or someone who is an advanced computer user. They are NOT meant for the average computer user. Please realize that by executing these instructions, you may have to trouble shoot many advanced issues yourself.

Pre-Installation

Minimum Requirements

Installing Metacat requires a server running an SQL92 compliant database (Oracle 8i recommended) with at least 128MB RAM, and a Pentium III class processor or higher. The amount of disk space required depends on the size of your RDBMS tablespace (which should be at least 10 MB, however Metacat itself requires only about 1 MB of free space after installation. These instructions assume a Linux environment but may work on other UNIX type environments, however this has not been tested.

Additional Required Software

The server on which you wish to install Metacat must have the following software installed and running correctly before attempting to install Metacat.

  • Oracle 8i (or another SQL92 compliant RDBMS like Postgres)
  • Apache Jakarta-Ant
  • Apache Jakarta-Tomcat

    Note: For a more robust web serving environment, Apache web server should be installed along with Tomcat and the two should be integrated as described on the Apache web site.

Aditional Software Setup

Java

You'll need a recent Java SDK; j2sdk1.4.2 or later is required. We haven't tested with any of the 1.5.x versions yet, so probably best to stay with 1.4.x. Make sure that JAVA_HOME environment variable is properly set and that both java and javac are on your PATH.

Oracle 8i or Postgres

Oracle:
The Oracle RDBMS must be installed and running as a daemon on the system. In addition the JDBC listener must be enabled. You can enable it by logging in as your Oracle user and typing the following: 

lsnrctl start
Your instance should have a table space of at least 5 MB (10 MB or higher recommended). You should also have a username specific to Metacat created and enabled. This user must have most normal permissions including CREATE SESSION, CREATE TABLE, CREATE INDEX, CREATE TRIGGER, EXECUTE PROCEDURE, EXECUTE TYPE, etc. If an action is unexplainably rejected by Metacat it is probably because the user permissions are not correctly set.

Postgres:
Postgres can be easily installed on most linux distributions and on Windows (using cygwin) and Mac OS X. Using Fedora Core or RedHat Linux, you can install the rpms for postgres and then run /etc/init.d/postgresql start in order to start the database. This initializes the data files. You need to do a bit of configuration to create a database and set up a user account and allow internet access via jdbc. See the postgres documentation for this, but here is a quick start:

  • Switch to the "postgres" user account and edit "data/pg_hba.conf", adding the following line to the file:
    host metacat metacat 127.0.0.1 255.255.255.255 password
  • Edit the "data/postgres.conf" file and uncomment and edit the line starting with "tcpip_socket" so that it reads tcpip_socket = true
  • Run createdb metacat to create a new database
  • Run psql metacat to log in using the postgres account and create a new "metacat" user account
    • In postgres, run CREATE USER metacat WITH UNENCRYPTED PASSWORD 'apasswordyoulike';
    • This creates a new account called metacat on the database named metacat
    • Note: there are many ways to do this, so others such as using ENCRYPTED passwords will work fine.
  • Exit the postgres account back to root and restart the postgres database with /etc/init.d/postgresql restart
  • Test logging into the postgres db using the metacat account with the following command: psql -U metacat -W -h localhost metacat

Ant

Ant is a Java based build application similar to Make on UNIX systems. It takes in installation parameters from a file in the root installation directory named "build.xml". The Metacat CVS module contains a default build.xml file that may require some modification upon installation. Ant should be installed on the system and the "ant" executable shell script should be available in the users path. We note that the current build is not working with Ant 1.6.x, so you'll need to use an earler version. We have successfully used Ant 1.5.1, 1.5.2, and some earlier versions.

Tomcat

Install Tomcat into the directory of your choice. The directory in which you install Tomcat itself will be referred to as the "$CATALINA_HOME". We recommend that you install Tomcat version 4.0. More details about Tomcat installation is available here.

Once all of the prerequisite software is installed as described above, the installation of Metacat can begin. First you must have a current version of the source distribution of Metacat. You can get it two ways. Authorized users can check it out of the NCEAS CVS system. You'll need both the "metacat" module and the "utilities" module to be checked out in sibling directories. The command is as follows: 

mkdir knb-software
cd knb-software
cvs checkout -P metacat
cvs checkout -P utilities
Or you can download a gzipped tar file from this site.

Edit build.properties File

Once you have either checked out or unzipped and untarred the source distribution, you can begin the installation process. Change into the metacat directory and edit the file called "build.properties". You will need to change a number of configuration properties to match the setup on your system.

The properties that you will likely need to change will include tomcat, tomcatversion, webapps, context, server, httpserver, database, jdbc-connect, jdbc-base, user, password, datafilepath, inlinedatafilepath, cvsroot, cvsroot-alternate, and default-style. Each is described in detail in the table below.

Properties you will likely need to change:

Property Description Default value and examples of other values
tomcat The tomcat property is the location in which tomcat is installed. Default:   /usr/local/devtools/jakarta-tomcat

Example:   C:/Tomcat4
tomcatversion The tomcatversion property is the version of your Tomcat. You should put tomcat3 or tomcat4 here. Default:   tomcat4

Example:   tomcat3
webapps The webapps property is the location in which your tomcat servlet contexts are installed. This is typically "TOMCAT_HOME/webapps", where TOMCAT_HOME is the same value that you entered for the 'tomcat' property above. Default:   /var/www/org.ecoinformatics.knb

Example:   C:/Tomcat4/webapps
context The context property is the name of the servlet context in which you want Metacat to be installed. This will determine the installation directory for the servlet and many of the URLs that are used to access the installed Metacat server. Default:   knb

Example:   mycontext
server The server property is the secure HTTPS address on which Metacat is running (note that you should not include the 'http://' in the server property). The server setting should include the SSL port number appended to the end if Tomcat is running stand-alone (see example). Default:   knb.ecoinformatics.org

Example:   somehost.university.edu:8443
httpserver httpserver is the plain HTTP address on which Metacat is running (note that you should not include the 'http://' in the httpserver property). The httpserver setting should include the HTTP plain port number appended to the end if Tomcat is running stand-alone (see example). Default:   knb.ecoinformatics.org

Example:   somehost.university.edu:8080
ldapUrl URL to the LDAP server Default:   ldap://ldap.ecoinformatics.org/dc=ecoinformatics,dc=org
database Select the database to use for metadata storage. Valid values are oracle, postgresql, or sqlserver. Default:   oracle

Other possible values:   postgresql   sqlserver
jdbc-connect The JDBC connection string used to connect to the database. Default:   jdbc:oracle:thin:@metacat.nceas.ucsb.edu:1521:knb
jdbc-base The base directory for locating JDBC jar files (not needed for postgresql). Default:   /usr/oracle/jdbc/lib

Example:   C:/jdev10g/jdbc/lib
user The database user name that you set up to use Metacat. For example, an Oracle username. Default:   knb

Example:   metacatdb
password The database password that you set up to use Metacat. Default:   yourPasswordHere

Example:   metacat123
datafilepath The datafilepath is the directory to store the data file. Default:   /var/metacat/data

Example:   C:/Tomcat4/data/knb/data
inlinedatafilepath The inlinedatafilepath is the directory to store inline data. Default:   /var/metacat/inline-data

Example:   C:/Tomcat4/data/knb/inlinedata
cvsroot CVS access to retrieve latest EML. Default:   
:ext:${env.USER}@cvs.ecoinformatics.org:/cvs
 Example:   
:ext:myaccount@cvs.ecoinformatics.org:/cvs
cvsroot-alternate CVS access to retrieve latest conversion styles. Default:   
:ext:${env.USER}@cvs.nceas.ucsb.edu:/cvs/pbi
 Example:   
:ext:myaccount@cvs.nceas.ucsb.edu:/cvs/pbi
default-style The default-style parameter defines the "style-set" that is to be used by default when the qformat parameter is missing or set to "html" during a query. It is set to "knb", which is one of the styles that ships with the default metacat distribution. Other possible settings are shown in the examples to the right. Default:   knb

Examples:   
default   esa   knb2   nceas   nrs   obfs   specnet

Note that the build file is preconfigured to install Metacat either using Oracle, PostgreSQL, or Microsoft SQL Server as a backend database. To change the database system, simply change the value of the 'database' property to be the name of the database target that you wish to use (either 'oracle', 'postgresql', or 'sqlserver').

Other properties in build.properties that you can (but generally need not) change:

Property Description Default value and examples of other values
inst.cgi.dir Installation directory for registry CGI scripts Default:   /var/www/cgi-knb
cgi-prefix   Default:   http://knb.ecoinformatics.org/cgi-bin
knb-site-url This is the URL to the web context root for the knb site. It is used for the qformat=knb skin only. Default:   http://knb.ecoinformatics.org
forcereplicationwaitingtime The waiting time before replication is forced to begin after uploading a package. The default value should usually suffice. Default:   30000  

Metacat has a number of additional settable properties in file metacat/lib/metacat.properties. Under most circumstances, you will not need to modify this file because the properties of interest to you can be controlled by editing build.properties as described above. To learn more about Metacat's additional properties, see Metacat Properties File.

Note: When setting properties, DO NOT add a trailing slash [/] to the end of any paths that are specified. Metacat will not function correctly if you do so.

SQL Scripts

You now need to set up the table structure in your database. You can do either do this using the ant build system, or by manually running the scripts using a sql utility.

WARNING: Do NOT run this on an existing metacat installation as it will delete all of your data. If you have an existing metacat installation, see the instructions for "Upgrading" below.

To run the scripts using ant, type ant installdb. This does not work for postgres, so you'll need to run the xmltables-postgres.sql script manually (see next paragraph).

To run the scripts manually, change to the metacat/build/src directory. Then run you RDBMS's SQL utility. In Oracle it is SQLPlus. This tutorial assumes an Oracle database so this example is for SQLPlus. Login as the oracle user that was set up for use with Metacat. At the SQLPlus prompt type the following: 

@xmltables.sql;
For postgres, use a command like: psql -U metacat -W -h localhost -f build/src/xmltables-postgres.sql metacat

Either way, you should see a bunch of output showing the creation of the Metacat table space. The first time you run this script you will get several errors at the beginning saying that you cannot drop a table/index/trigger because it does not exist. This is normal. Any other errors besides this need to be resolved before continuing. The script file name for PostgreSQL is xmltables-postgres.sql and for Microsoft SQL server is xmltables-sqlserver.sql.

If the script has run correctly you should be able to type 

describe xml_documents
and it should tell you 
    Name            Null?         Type
    --------------  ------------  ---------------- 
     DOCID          NOT NULL      VARCHAR2(250)
     ROOTNODEID                   NUMBER(20)
     DOCNAME                      VARCHAR2(100)
     DOCTYPE                      VARCHAR2(100)
     DOCTITLE                     VARCHAR2(1000)
     USER_OWNER                   VARCHAR2(100)
     USER_UPDATED                 VARCHAR2(100)
     SERVER_LOCATION              NUMBER(20)
     REV                          NUMBER(10)
     DATE_CREATED                 DATE
     DATE_UPDATED                 DATE
     PUBLIC_ACCESS                NUMBER(1)
     UPDATED                      NUMBER(1)

Upgrading SQL Scripts

If you have an existing metacat installation, you should not run the install script because it will replace all of the older tables with new, empty copies of the tables. Thus you would lose your data! Instead, you can run some upgrade scripts that will change the table structure as needed for the new version. If you are skipping versions, run each upgrade script for the intermediate versions as well. Currently the upgrade scripts are:

  • upgrade-db-to-1.2.sql
  • upgrade-db-to-1.3.sql
  • upgrade-db-to-1.4.sql

So, if you had an existing metacat 1.0 installation and you were upgrading to 1.4, you would need to run all three scripts in sequence: upgrade-db-to-1.2.sql, upgrade-db-to-1.3.sql, and upgrade-db-to-1.4.sql. However, if you were starting from a Metacat 1.3.x installation, you would only need to run the upgrade-db-to-1.4.sql script.

Compilation and Installation

Ant allows compilation and installation to be done in one step. Change into the metacat directory and type: 

ant geteml install
or, if you are upgrading an existing installation, type: 
ant clean geteml upgrade

You should see a bunch of messages telling you the progress of compilation and installation. When it is done you should see the message BUILD SUCCESSFUL and you should be returned to a UNIX command prompt. If you do not see the message BUILD SUCCESSFUL then there was an error that you need to resolve. This may come up if you are logged in as a user that does not have write access to one or more of the directories that are listed in the build.xml file, or if any of the paths to files are not configured correctly in the "config" target.

Once metacat itself is installed, you should also register the Ecological Metadata Language (EML) DTDs and schemas. This process is done most easily by running:

ant dtdschemasql

This command registers the DTDs' and schemas' location in the metacat server. Your database username and password have to be set correctly for this to work.

Note: The 'data' directory in the installation directory must be writeable by whatever user is running Tomcat or you will not be able to upload data files to the system.

Restart Tomcat

Once you have successfully installed Metacat, there is one more step. Tomcat (and Apache if you have Tomcat integrated with it) must be restarted. To do this, login as the user that runs your tomcat server (often "tomcat"), go to $CATALINA_HOME/bin and type: 

   ./shutdown.sh 
   ./startup.sh
In the Tomcat startup messages you should see something in log file like: 
    MetacatServlet Initialize
    Context log path="/metadata" :Metacat: init
    MetacatServlet Initialize
If you see that message Tomcat is successfully loading the Metacat servlet. Next, try to run your new servlet. Go to a web browser and type: 
http://yourserver.yourdomain.com/yourcontext/
You should substitute your context name for "yourcontext" in the url above. If everything is working correctly, you should see a query page followed by an empty result set. Note that if you do not have Tomcat integrated with Apache you will probably have to type 
http://yourserver.yourdomain.com:8080/yourcontext/