Metacat

<?xml version="1.0"?>

<!--

  *  '$RCSfile$'

  *      Authors: Matthew Brooke

  *    Copyright: 2000 Regents of the University of California and the

  *               National Center for Ecological Analysis and Synthesis

  *  For Details: http://www.nceas.ucsb.edu/

  *

  *   '$Author$'

  *     '$Date$'

  * '$Revision$'

  *

  * This program is free software; you can redistribute it and/or modify

  * it under the terms of the GNU General Public License as published by

  * the Free Software Foundation; either version 2 of the License, or

  * (at your option) any later version.

  *

  * This program is distributed in the hope that it will be useful,

  * but WITHOUT ANY WARRANTY; without even the implied warranty of

  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

  * GNU General Public License for more details.

  *

  * You should have received a copy of the GNU General Public License

  * along with this program; if not, write to the Free Software

  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

  *

  *****************************************************************************

  *

  * This is an XSLT (http://www.w3.org/TR/xslt) stylesheet that provides a

  * single, central location for setting all installation-specific paths for

  * XSLT stylesheets.  It is intended to be imported (using the

  * <xsl:import href="..." /> element) into other XSLT stylesheets used in the

  * transformation of xml files that are valid with respect to the

  * applicable dtd of the Ecological Metadata Language (EML).

  * Some of these paths incorporate values of the form: @token-name@; these are

  * intended to allow an Ant (http://jakarta.apache.org/ant/index.html) build

  * script to replace the tokens automatically with the correct values at build/

  * install time.  If Ant is not used, the tokens may simply be edited by hand

  * to point to the correct resources.

  * Note that the values given below may be overridden by passing parameters to

  * the XSLT processor programatically, although the procedure for doing so is

  * vendor-specific.  Note also that these parameter definitions will be overridden

  * by any identical parameter names declared within xsl stylesheets that import

  * this stylesheet.

  *

-->

<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">

<!--

    /**

    *   The filename of the default css stylesheet to be used

    *   (filename only - not the whole path, and no ".css" extension.  The

    *   example below would look for a file named "default.css" in the same

    *   directory as the stylesheets

    */

-->

  <xsl:param name="qformat">@default-style@</xsl:param>

<!--

    /**

    *   The module which need to be display in eml2 document. The default

    *   value is dataset

    */

-->

  <xsl:param name="displaymodule">dataset</xsl:param>

<!--

    /**

    *   To show the links for the Entities in the dataset display module.

    */

-->

  <xsl:param name="withEntityLinks">1</xsl:param>

<!--

    /**

    *   To show the link for Additional Metadata in the dataset display module.

    */

-->

  <xsl:param name="withAdditionalMetadataLink">1</xsl:param>

<!--

    /**

    *   To show the link for the Original XML in the dataset display module.

    */

-->

  <xsl:param name="withOriginalXMLLink">1</xsl:param>

<!--

    /**

    *   To show any html links (emails and webpage).

    */

-->

  <xsl:param name="withHTMLLinks">1</xsl:param>

<!--

    /**

    *   To show the Attributes table in the entity display.

    */

-->

  <xsl:param name="withAttributes">1</xsl:param>

<!--

    /**

    *   To insert templates where header and footer are defined.

    */

-->

  <xsl:param name="insertTemplate">1</xsl:param>

<!--

   /**

    *   the path of the directory where the XSL and CSS files reside - starts

    *   with context name, eg: /myContextRoot/styleDirectory.

    *   (As found in "http://hostname:port/myContextRoot/styleDirectory").

    *   Needs leading slash but not trailing slash

    *

    *   EXAMPLE:

    *       <xsl:param name="stylePath">/brooke/style</xsl:param>

    */

-->

    <xsl:param name="stylePath">@style-skins-path@</xsl:param>

<!--

   /*

    *   the path of the directory where the common javascript and css files

    *   reside - i.e the files that are not skin-specific. Starts

    *   with context name, eg: /myContextRoot/styleCommonDirectory.

    *   (As found in "http://hostname:port/myContextRoot/styleCommonDirectory").

    *

    *   EXAMPLE

    *       <xsl:param name="styleCommonPath">/brooke/style/common</xsl:param>

    */

-->

    <xsl:param name="styleCommonPath">@style-common-path@</xsl:param>

<!--the docid of xml which is processed-->

    <xsl:param name="docid"/>

<!-- type of entity, data table or spacial raster or others-->

    <xsl:param name="entitytype"></xsl:param>

<!-- the index of entity in same entity type -->

    <xsl:param name="entityindex"/>

<!-- the index of attribute in same entity -->

    <xsl:param name="attributeindex"/>

<!-- the index of physical part in entity part-->

    <xsl:param name="physicalindex"/>

<!-- the index of distribution in physical part  -->

    <xsl:param name="distributionindex"/>

<!-- the levle of distribution -->

    <xsl:param name="distributionlevel"/>

<!-- the index of attribute in attribute list-->

    <xsl:param name="attributeindex"/>

<!-- the index of additional metadata-->

    <xsl:param name="additionalmetadataindex">1</xsl:param>

<!-- attribute set to get rid of cell spacing-->

    <xsl:attribute-set name="cellspacing">

      <xsl:attribute name="cellpadding">0</xsl:attribute>

      <xsl:attribute name="cellspacing">0</xsl:attribute>

    </xsl:attribute-set>

<!-- determines whether to use metacat or LSID identiers-->

	<xsl:param name="lsidauthority"></xsl:param>

<!-- the url for the data registry of the dataset-->

	<xsl:param name="registryurl"></xsl:param>

<!-- the name of the data registry of the dataset-->

	<xsl:param name="registryname"></xsl:param>

<!--

    /**

    *   The base URI to be used for the href link to each document in a

    *   "subject-relationaship-object" triple

    *

    *   EXAMPLE:

    *       <xsl:param name="tripleURI">

    *         <![CDATA[/brooke/servlet/metacat?action=read&qformat=knb&docid=]]>

    *       </xsl:param>

    *

    *   (Note in the above case the "qformat=knb" parameter in the url; a system

    *   could pass this parameter to the XSLT engine to override the local

    *   <xsl:param name="qformat"> tags defined earlier in this document.)

    */

-->

    <xsl:param name="tripleURI"><![CDATA[@servlet-path@?action=read&qformat=]]><xsl:value-of select="$qformat" /><![CDATA[&docid=]]></xsl:param>

    <!-- URL for xmlformat-->

    <xsl:param name="xmlURI"><![CDATA[@servlet-path@?action=read&qformat=xml&docid=]]></xsl:param>

<!--

    /**

    *   Most of the html pages are currently laid out as a 2-column table, with

    *   highlights for more-major rows containing subsection titles etc.

    *   The following parameters are used within the

    *           <td width="whateverWidth" class="whateverClass">

    *   tags to define the column widths and (css) styles.

    *

    *   The values of the "xxxColWidth" parameters can be percentages (need to

    *   include % sign) or pixels (number only). Note that if a width is defined

    *   in the CSS stylesheet (see next paragraph), it will override this local

    *   width setting in browsers newer than NN4

    *

    *   The values of the "xxxColStyle" parameters refer to style definitions

    *   listed in the *.css stylesheet that is defined in this xsl document,

    *   above (in the <xsl:param name="qformat"> tag).

    *

    *   (Note that if the "qformat" is changed from the default by passing a

    *   value in the url (see notes for <xsl:param name="qformat"> tag, above),

    *   then the params below must match style names in the "new" CSS stylesheet

    */

-->

<!--    the style for major rows containing subsection titles etc. -->

  <xsl:param name="subHeaderStyle" select="'tablehead'"/>

<!--    the style for major rows containing links, such as additional metadata,

        original xml file etc. -->

  <xsl:param name="linkedHeaderStyle" select="'linkedHeaderStyle'"/>

<!--    the width for the first column (but see note above) -->

  <xsl:param name="firstColWidth" select="'15%'"/>

<!-- the style for the first column -->

  <xsl:param name="firstColStyle" select="'highlight'"/>

<!--    the width for the second column (but see note above) -->

  <xsl:param name="secondColWidth" select="'85%'"/>

<!-- the style for the second column -->

  <xsl:param name="secondColStyle" select="'secondCol'"/>

<!-- the style for the attribute table -->

  <xsl:param name="tableattributeStyle" select="'tableattribute'"/>

<!-- the style for the border -->

  <xsl:param name="borderStyle" select="'bordered'"/>

<!-- the style for the even col in attributes table -->

  <xsl:param name="colevenStyle" select="'coleven'"/>

<!-- the style for the inner even col in attributes table -->

  <xsl:param name="innercolevenStyle" select="'innercoleven'"/>

<!-- the style for the odd col in attributes table -->

  <xsl:param name="coloddStyle" select="'colodd'"/>

<!-- the style for the inner odd col in attributes table -->

  <xsl:param name="innercoloddStyle" select="'innercolodd'"/>

<!-- the default alignment style for the wrapper around the main tables -->

  <xsl:param name="mainTableAligmentStyle" select="'mainTableAligmentStyle'"/>

<!-- the default style for the main container table -->

  <xsl:param name="mainContainerTableStyle" select="'mainContainerTableStyle'"/>

<!-- the default style for all other tables -->

  <xsl:param name="tabledefaultStyle" select="'tabledefault'"/>

<!-- the style for table party -->

  <xsl:param name="tablepartyStyle" select="'tableparty'"/>

<!-- Some html pages use a nested table in the second column.

     Some of these nested tables set their first column to

     the following width: -->

  <xsl:param name="secondColIndent" select="'10%'"/>

<!-- the first column width of attribute table-->

  <xsl:param name="attributefirstColWidth" select="'15%'"/>

</xsl:stylesheet>