/docs/dev/testing-metacat.html - Annotate - Metacat - Ecoinformatics Redmine

metacat/docs/dev/testing-metacat.html @ 8077

-            daigle
+<!--
   * sitemaps.html
+  *
   *      Authors: Michael Daigle
   *    Copyright: 2008 Regents of the University of California and the
   *               National Center for Ecological Analysis and Synthesis
   *  For Details: http://www.nceas.ucsb.edu/
   *      Created: 2008 November 4
   *      Version:
   *    File Info: '$ '
+  *
+  *
 -->
 <HTML>
 <HEAD>
 <TITLE>Testing Metacat</TITLE>
-            daigle
+<!-- unfortunately, we have to look for the common css file in the
      user docs directory.  This is because the user docs deploy to
      the top level of the metacat docs on the knb web server -->
 <link rel="stylesheet" type="text/css" href="../user/common.css">
-            daigle
+<link rel="stylesheet" type="text/css" href="./default.css">
 </HEAD>
 <BODY>
   <table width="100%">
     <tr>
       <td class="tablehead" colspan="2"><p class="label">Testing Metacat</p></td>
       <td class="tablehead" colspan="2" align="right">
-            daigle
+        <a href="./building-metacat.html">Back</a> | <a href="./index.html">Home</a> |
         <a href="./troubleshooting.html">Next</a>
-            daigle
+      </td>
     </tr>
   </table>
   <div class="header1">Table of Contents</div>
   <div class="toc">
     <div class="toc1"><a href="#Intro">About Metacat Testing</a></div>
       <div class="toc2"><a href="#Overview">Overview</a></div>
       <div class="toc2"><a href="#MetacatImplementation">JUnit Implementation in Metacat</a></div>
     <div class="toc1"><a href="#WritingTestCase">Writing a Test Case</a></div>
       <div class="toc2"><a href="#Basics">Basics</a></div>
       <div class="toc2"><a href="#MCTestCase">MCTestCase Base Class</a></div>
       <div class="toc2"><a href="#BestPractices">Best Practices</a></div>
     <div class="toc1"><a href="#RunTests">Running Test Cases</a></div>
       <div class="toc2"><a href="#AntTask">Ant task</a></div>
       <div class="toc2"><a href="#ConfigureMetacat">Configure Metacat For Testing</a></div>
       <div class="toc2"><a href="#RunAllTests">Run All Tests</a></div>
       <div class="toc2"><a href="#RunOneTest">Run One Test</a></div>
       <div class="toc2"><a href="#ViewingOutput">Viewing Test Output</a></div>
-            daigle
+    <div class="toc1"><a href="#TestDbVersions">Testing Different Database Schema Versions</a></div>
-            daigle
+      <div class="toc2"><a href="#Scripts">Scripts to Run</a></div>
       <div class="toc2"><a href="#CheckoutScripts">Get Scripts Via Checkout</a></div>
       <div class="toc2"><a href="#ScriptRepo">Script Repository</a></div>
       <div class="toc2"><a href="#ManuallyRunScripts">Manually Run Scripts</a></div>
     <div class="toc1"><a href="#UserTesting">User Testing</a></div>
       <div class="toc2"><a href="#TestingSkins">Testing Skins</a></div>
-            daigle
+      <div class="toc2"><a href="#TestingWebLDAP">Testing LDAP Web Interface</a></div>
       <div class="toc2"><a href="#TestingRegistry">Testing Metadata Registry</a></div>
-            daigle
+      <div class="toc2"><a href="#TestingEcogridRegistry">Testing the EcoGrid Registry Service</a></div>
-            daigle
+    <div class="toc1"><a href="#LoadTesting">Load Testing</a></div>
       <div class="toc2"><a href="#LoadTestCodeFiles">Load Test Code Files</a></div>
       <div class="toc2"><a href="#GeneratingDictionaryFiles">Generating Dictionary Files</a></div>
       <div class="toc2"><a href="#InsertLoadTest">Insert Load Test</a></div>
       <div class="toc2"><a href="#SQueryLoadTest">SQuery Load Test</a></div>
       <div class="toc2"><a href="#ReadLoadTest">Read Load Test</a></div>
       <div class="toc2"><a href="#TestDriverScript">Test Driver Script</a></div>
     <div class="toc1"><a href="#ProfilingMetacat">Profiling Metacat</a></div>
-            daigle
+  </div>
   <a name="Intro"></a><div class="header1">About Metacat Testing</div>
   <a name="Overview"></a><div class="header2">Overview</div>
   <p>Metacat uses JUnit tests to test its core functionality.  These tests are
   good for testing the internal workings of an application, but don't test the
   layout and appearance.  JUnit tests are meant to be one tool in the developer's
   test arsinal. If you are not familiar with JUnit, you should search out some
   tutorial documentation online.  One such tutorial is at
   <a href="http://clarkware.com/articles/JUnitPrimer.html"> The Clarkware JUnit primer</a></p>
   <p>Metacat test cases will need to be run on the same server as the Metacat
   instance that you want to test.  Since Metacat and its test cases share the same
   configuration files, there is no way to run the tests remotely.</p>
   <a name="MetacatImplementation"></a><div class="header2">JUnit Implementation in Metacat</div>
   <p>Metacat test cases are located in the code at:
   <div class="code">&lt;workspace&gt;/metacat/test/edu/ucsb/nceas/metacat*/</div>
   There you will find several java files that define JUnit tests.</p>
   <p> Test cases are run via an ant task, and output from the tests appears in
   a build directory.  More on this to follow.</p>
   <a name="WritingTestCase"></a><div class="header1">Writing a Test Case</div>
   <a name="Basics"></a><div class="header2">Basics</div>
   <p>All you need to do to get your JUnit test included into the Metacat test
   suite is to create it in one of the &lt;workspace&gt;/test/edu/ucsb/nceas/metacat*/
   directories.  The ant test tasks will know that it should be run. </p>
   <p> The following methods are required in a test case class:
   <ul>
     <li>public &lt;Constructor&gt;(String name) - The constructor for the test class. </li>
 	<li>public void setUp() - Set up any dependencies for the tests.  This is run before each test case.</li>
 	<li>public void tearDown() - Release an resources used by the test.</li>
 	<li>public static Test suite() - define the test methods that need to be run.</li>
 	<li>public void initialize() - define any global initializations that need to be done.</li>
   </ul>
   You will test for failure using the many assertion methods available.</p>
   <a name="MCTestCase"></a><div class="header2">MCTestCase Base Class</div>
   <p>Metacat test cases extend the MCTestCase base class, which holds common
   methods and variables.  Some of these include:
   <ul>
     <li>SUCCESS/FALURE - boolean variables holding the values for success and failure. </li>
 	<li>metacatUrl, username, password - connection variables used for LDAP connectivity</li>
 	<li>readDocumentIdWhichEqualsDoc() - method to read a document from Metacat server.</li>
 	<li>debug() - method to display debug output to standard error.</li>
   </ul>
   These are just a few examples to give you an idea of what is in MCTestCase.
   </p>
   <a name="BestPractices"></a><div class="header2">Best Practices</div>
   <p>The following are a few best practices when writing test cases:
   <ul>
     <li>Extend MCTestCase - Although strictly speaking, it is possible to bypass MCTestCase
     and just extend the JUnit TestCase class, you should not do so.   You should always
     extend the MCTestCase class.</li>
     <li>Extend Multiple Test Methods - Try to strike a balance between the number of test
     methods and the size of each test.  If a test method starts to get huge, you might see
     if you can break it down into mulitple tests based on functionality.  If the number of
     tests in the test suite starts to get large, you might see if it makes sense to
     separate them out into different test classes.</li>
 	<li>Use assertion message - Most assertion methods have an alternate implementation that
 	includes a message parameter.  This message will be shown if the assertion fails.  You
 	should use this version of the assertion method.</li>
 	<li>debug() - You should use the debug() method available in the MCTestCase class to
 	display debug output as opposed to System.err.println().  The test configuration will
 	allow you to turn off debug output when you use the debug() method.</li>
   </ul>
   <a name="RunTests"></a><div class="header1">Running Test Cases</div>
   <a name="AntTask"></a><div class="header2">Ant task</div>
   <p>As we discussed earlier, the test cases run from within ant tasks.  There is a
   task to run all tests and a task to run individual tests. </p>
   <p>You will need to have ant installed on your system.  For downloads and instructions,
   visit the <a href="http://ant.apache.org/">Apache Ant site</a>.
   </p>
   <a name="ConfigureMetacat"></a><div class="header2">Configure Metacat For Testing</div>
   <p>The test cases will look at the server's metacat properties file for configuration,
   so there are two places that need to be configured.</p>
   <p>First, you need to edit the configuration file at:
   <div class="code">&lt;workspace&gt;/metacat/test/test.properties</div>
   This should only hold one property: metacat.contextDir.  This should point to
   the context directory for the metacat server you are testing.  For example:
-            leinfelder
+  <div class="code">metacat.contextDir=/var/lib/tomcat6/webapps/knb</div>
-            daigle
+  The test classes will use this to determine where to look for the server
   metacat.properties file.</p>
   <p>the remainder of the configuration needs to happen in the actual server's
   metacat.properties file located at:
   <div class="code">&lt;workspace&gt;/metacat/lib/metacat.properties</div>
-            daigle
+  You will need to verify that all test.* properties are set correctly:
-            daigle
+  <ul>
     <li>test.printdebug - true if you want debug output, false otherwise </li>
     <li>test.metacatUrl - the url for the metacat servlet (i.e. http://localhost:8080/knb/metacat)</li>
     <li>test.contextUrl - the url for the metacat web service (i.e. http://localhost:8080/knb)</li>
     <li>test.metacatDeployDir - the directory where metacat is physically deployed (i.e. /usr/local/tomcat/webapps/knb)</li>
     <li>test.mcUser - the first metacat test user ("uid=kepler,o=unaffiliated,dc=ecoinformatics,dc=org" should be fine)</li>
     <li>test.mcPassword - the first metacat test password ("kepler" should be fine)</li>
     <li>test.mcAnotherUser - the second metacat test user.  This user must be a member of the knb-usr
         group in ldap. ("uid=test,o=NCEAS,dc=ecoinformatics,dc=org" should be fine)</li>
     <li>test.mcAnotherPassword - the second metacat test password ("test" should be fine)</li>
     <li>test.piscoUser - the pisco test user ("uid=piscotest,o=PISCO,dc=ecoinformatics,dc=org" should be fine)</li>
     <li>test.piscoPassword - the pisco test password ("testPW" should be fine)</li>
     <li>test.lterUser - the lter test user ("uid=tmonkey,o=LTER,dc=ecoinformatics,dc=org" should be fine)</li>
     <li>test.lterPassword - the lter test password ("T3$tusr" should be fine)</li>
     <li>test.testProperty - a property to verify that we can read properties (leave as "testing")</li>
   </ul>
   </p>
   <p>Note that none of the test users should also be administrative users.  This will mess up
   the access tests since some document modifications will succeed when we expect them to fail.</p>
   <p>Once this is done, you will need to rebuild and redeploy the Metacat server.  Note that
   changing these properties does nothing to change the way the Metacat server runs.  Rebuilding
   and redeploying merely makes the test properties available to the JUnit tests.</p>
   <a name="RunAllTests"></a><div class="header2">Run All Tests</div>
   <p>To run all tests, go to the &lt;workspace&gt;/metacat directory and type</p>
   <div class="code">ant clean test</div>
   You will see a line to standard output summarizing each test result.
   </p>
   <a name="RunOneTest"></a><div class="header2">Run One Test</div>
   <p>To run one test, go to the &lt;workspace&gt;/metacat directory and type</p>
   <div class="code">ant clean runonetest -Dtesttorun=&lt;test_name&gt;</div>
   Where &lt;test_name&gt; is the name of the JUnit test class (without .java on
   the end).  You will see debug information print to standard error.
   </p>
   <a name="ViewingOutput"></a><div class="header2">Viewing Test Output</div>
   <p>Regardless of whether you ran one test or all tests, you will see output in
   the Metacat build directory in your code at:
   <div class="code">&lt;workspace&gt;/metacat/build</div>
   There will be one output file for each test class.  The files will look like
   <div class="code">TEST-edu.ucsb.nceas.&lt;test_dir&gt;.&lt;test_name&gt;.txt</div>
   where &lt;test_dir&gt; is the metacat* directory where the test lives and
   &lt;test_name&gt; is the name of the JUnit test class. These output files will have
   all standard error and standard out output as well as information on assertion
   failures in the event of a failed test.
   </p>
             daigle
   <a name="TestDbVersions"></a><div class="header1">Testing Different Database Schema Versions</div>
   <p>Now and again it is necessary to restore your test database to an older schema version
   either because you need to test upgrade functionality, or you need to test backwords
   compatibility of code.  This section describes how to get your db schema to an older
   version.
-            daigle
+  <a name="Scripts"></a><div class="header2">Scripts to Run</div>
-            daigle
+  <p>It is assumed that you have an empty metacat database up and running with a
   metacat user.
   <p>There are two types of scripts that need to be run in order to create a Metacat
   schema:</p>
   <ul>
   <li>xmltables-&lt;dbtype&gt;.sql - where &lt;dbtype&gt; is either oracle or postgres
   depending on what type of database you are running against.  This script creates the
   necessary tables for Metacat.</li>
   <li>loaddtdschema-&lt;dbtype&gt;.sql - where &lt;dbtype&gt; is either oracle or postgres
   depending on what type of database you are running against.  This script creates the
   necessary seed data for Metacat.</li>
   </ul>
-            daigle
+  <a name="CheckoutScripts"></a><div class="header2">Get Scripts Via Checkout</div>
-            daigle
+  <p>One way to get the scripts you need is to check out the release tag for the version
   of metacat that you want to install.  You can then run the two scripts shown above to
   create your database.</p>
-            daigle
+  <a name="ScriptRepo"></a><div class="header2">Script Repository</div>
-            daigle
+  <p>For convenience, the scripts to create each version have been extracted and
   checked into:</p>
     <div class="code">&lt;metacat_code&gt;/src/scripts/metacat-db-versions</div>
   <p>The files look like:</p>
   <ul>
   <li>&lt;version&gt;_xmltables-&lt;dbtype&gt;.sql - where &lt;version&gt; is the version
   of the schema that you want to create and &lt;dbtype&gt; is either oracle or postgres
   depending on what type of database you are running against.  This script creates the
   necessary tables for Metacat.</li>
   <li>&lt;version&gt;_loaddtdschema-&lt;dbtype&gt;.sql - where &lt;version&gt; is the version
   of the schema that you want to create and &lt;dbtype&gt; is either oracle or postgres
   depending on what type of database you are running against.  This script creates the
   necessary seed data for Metacat.</li>
   <li>&lt;version&gt;_cleanall-&lt;dbtype&gt;.sql - where &lt;version&gt; is the version
   of the schema that you want to create and &lt;dbtype&gt; is either oracle or postgres
   depending on what type of database you are running against. This is a convenience script
   to clean out the changes for that version.</li>
   </ul>
-            daigle
+  <a name="ManuallyRunScripts"></a><div class="header2">Manually Run Scripts</div>
-            daigle
+  <p>For instructions on running database scripts manually, please refer to:
   <a href="../user/run-db-scripts.html">how to run database scripts</a></p>
             daigle
-            daigle
+  <a name="UserTesting"></a><div class="header1">User Testing</div>
   <p>The following sections describe some basic end user testing to stress
   code that might not get tested by unit testing.</p>
   <a name="TestingSkins"></a><div class="header2">Testing Skins</div>
   <p>For each Skin:</p>
   <ul>
   <li>View main skin page by going to:
     <div class="code">http://dev.nceas.ucsb.edu/knb/style/skins/&lt;skin_name&gt;</div>
   for each skin, where &lt;skin_name&gt; is in:
-            daigle
+    <div class="code">default, nceas, esa, knb, lter, ltss, obfs, nrs, sanparks, saeon</div>
   Note that the kepler skin is installed on a different metacat instance and can be found at:
     <div class="code">http://kepler-dev.nceas.ucsb.edu/kepler</div>
-            daigle
+  </li>
   <li>Test logging in.  Where applicable (available on the skin) log in using an LDAP account.</li>
   <li>Test Basic searching
      <ul>
      <li>Do a basic search with nothing in the search field.  Should return all docs.</li>
      <li>Select a distinct word in the title of a doc.  Go back to main page and search for
      that word.</li>
      <li>Select the link to the doc and open the metadata.  Choose a distinct word from a
      field that is not Title, Abstract, Keywords or Personnel.  Go back to the main page and
      search all fields (if applicable)</li>
      </ul>
   </li>
   <li>Test Advanced Searching
      <ul>
      <li>On the main page, choose advanced search (if applicable)</li>
      <li>Test a variety of different search criteria</li>
      </ul>
   </li>
   <li>Test Registry (if applicable)
      <ul>
      <li>Create a new account</li>
      <li>use the "forgot your password" link</li>
      <li>change your password</li>
      </ul>
   </li>
   <li>Test Viewing Document
      <ul>
      <li>Use your search to find a document</li>
      <li>Choose the link to a document - you should see document details
      <li>In a separate browser, try the shortcut to the doc:
        <div class="code">http://dev.nceas.ucsb.edu/knb/metacat/&lt;doc_id&gt;/&lt;skin_name&gt;</div>
      You should see the same results as going to the doc via search.</li>
      </ul>
   </li>
   <li>Download Metadata
      <ul>
      <li>Choose the metadata download</li>
      <li>Save the file</li>
      <li>view contents for basic validity (contents exist, etc)</li>
      </ul>
   </li>
-            daigle
+  <li>Download Data
-            daigle
+     <ul>
      <li>Choose the data download</li>
      <li>view the data for basic validity (contents exist, etc)</li>
      </ul>
   </li>
   <li>View Data Table
      <ul>
      <li>Find a document with a data table</li>
      <li>Choose to view the data table</li>
      <li>view the data table for basic validity (contents exist, etc)</li>
      </ul>
   </li>
-            daigle
+  </ul>
   <a name="TestingWebLDAP"></a><div class="header2">Testing LDAP Web Interface</div>
   <p>The following skins use a perl based LDAP web interface to create
      accounts, change passwords and reset forgotten passwords: </p>
      <div class="code">default, nceas, esa, knb, lter, ltss, obfs, nrs, sanparks, saeon</div>
   <p>Following the instructions in the <a href="#TestingSkins"> Testing Skins</a>  section
      go to each of these skins and test:</p>
   <ul>
   <li>Create LDAP Account
     <ul>
     <li>Choose the "Create a New Account" link</li>
     <li>Fill out the required information.
       <ul>
       <li>Choose a username that will be easy to find and remove from ldap later.</li>
       <li>Use your real email address</li>
       </ul>
     </li>
     <li>Hit the "Register" button</li>
     <li>You may see a page with similar accounts.  If so, choose to continue.</li>
     <li>You should get a "Registration Succeeded" message.</li>
     </ul>
   </li>
   <li>Change LDAP Password (if available)</li>
     <ul>
     <li>Choose the "Change Your Password" link</li>
     <li>Fill out the requested information</li>
     <li>Hit the "Change password" button</li>
     <li>You should get a "Your password has been changed" message.</li>
     </ul>
   </li>
   <li>Request Forgotten LDAP Password Reset
     <ul>
     <li>Choose the "Forgot Your Password" link</li>
     <li>Enter your username</li>
     <li>Hit the "Reset Password" button</li>
     <li>You should get a "Your password has been reset" message.</li>
     <li>You should get an email with your new password</li>
     <li>Verify that you can log in with the new password</li>
     </ul>
   </li>
   </ul>
   <a name="TestingRegistry"></a><div class="header2">Testing Metadata Registry</div>
   <p>The following skins use a perl based registry service to register metadata and
      data in metacat via the web: </p>
      <div class="code">nceas, esa, ltss, obfs, nrs, sanparks, saeon</div>
   <p>Following the instructions in the <a href="#TestingSkins"> Testing Skins</a> section
      go to each of these skins and test:</p>
   <ul>
   <li>Choose the "Register Dataset" link</li>
   <li>Fill out required fields.  Note that there are typically many different fields.
       You should test out different combinations including attaching datasets if
       available.</li>
   <li>Hit the "Submit Dataset" button</li>
   <li>Review the information for accuracy</li>
   <li>Submit the data set</li>
   <li>You should get a "Success" message.</li>
   <li>Search for the data set in metacat and review for accuracy</li>
   </ul>
   <a name="TestingEcogridRegistry"></a><div class="header2">Testing the EcoGrid Registry Service</div>
   <p>The EcoGrid registry service maintains a database of systems that are available to EcoGrid. Primarily,
   these are Metacat instances which are built with the EcoGrid service automatically activated.  Testing
   the registry service is somewhat complicated.  The procedure described here uses Eclipse to test.
   These instructions assume that you have Eclipse installed and the Seek project set up as a Java project
   in Eclipse.</p>
   <ul>
   <li>Configure the Seek project in Eclipse
     <ul>
     <li>Right click on the Seek project and go to Properties->Java Build Path->Source</li>
     <li>Only the following two direcories should be set up as source:
       <ul>
       <li>seek/projects/ecogrid/src</li>
       <li>seek/projects/ecogrid/tests</li>
       </ul>
     </li>
     <li>Right click on the Seek project and go to Properties->Java Build Path->Libraries</li>
     <li>Add all Jars from:
       <ul>
       <li>seek/projects/ecogrid/lib/</li>
       <li>seek/projects/ecogrid/lib/axis-1_3/</li>
       <li>seek/projects/ecogrid/build/lib/</li>
       </ul>
     </li>
     <li>If you do not already have an Ant view open in Eclipse, in the menu, go to
         Window->Show View->Ant</li>
     <li>drag the file from the seek project at seek/projects/ecogrid/build.xml into
         the Ant window you just opened.</li>
     <li>Double click the serverjar and stubjar targets to build those jar files.<li>
     <li>Right click on the Seek project and go to Properties->Java Build Path->Libraries</li>
     <li>Add the two Jar files you just created:
       <ul>
-            daigle
+      <li>seek/projects/ecogrid/build/lib/RegistryServiceImpl.jar</li>
       <li>seek/projects/ecogrid/build/lib/RegistryService-stub.jar</li>
-            daigle
+      </ul>
     </li>
     </ul>
   </li>
   <li>View the RegistryServiceClient usage
     <ul>
     <li>In Eclipse, go to the registry service client at: <br>
         seek/projects/ecogrid/src/org/ecoinformatics/ecogrid/client/RegistryServiceClient.java</li>
     <li>Right click on RegistryServiceClient.java and go to Run As->Open Run Dialog</li>
     <li>Name it something like "RegistryServiceClient noargs" since you are running it without arguments.</li>
     <li>Hit the "Apply" button and then the "Run" button.</li>
     <li>Proceed past the project error warning dialog</li>
     <li>In the Eclipse console you should see usage instructions that look like:
       <ul>
       <li>Usage: java RegistryServiceClient add session_id local_file GSH</li>
       <li>Usage: java RegistryServiceClient update session_id  docid local_file GSH</li>
       <li>Usage: java RegistryServiceClient remove session_id docid GSH</li>
       <li>Usage: java RegistryServiceClient list session_id GSH</li>
       <li>Usage: java RegistryServiceClient query session_id query_field query_string GSH</li>
       </ul>
     </li>
     <li>Note: now you can run the client using the green "run" button in the Eclipse
     menu. We will use that button from now on, instead of going to the java file.</li>
     </ul>
   </li>
   <li>List Registry Services on dev
     <ul>
     <li>In Eclipse, go to the green run button dropdown and choose "Open Run Dialog"</li>
     <li>Right click on the "RegistryServiceClient noargs" configuration you created earlier and choose "duplicate".</li>
     <li>Name your new configuration "RegistryServiceClient list dev.nceas"
     <li>Go to the Arguments tab and enter: list 12345 http://dev.nceas.ucsb.edu/registry/services/RegistryService
       <ul>
       <li>This conforms to the list usage we saw earlier</li>
       <li>Note that the session ID is not needed for listing, so we include a random value.</li>
       <li>GSH always refers to the server where the registry database is held.</li>
       </ul>
     </li>
     <li>Choose "Run"</li>
     <li>Proceed past the project error warning dialog</li>
     <li>You should see a listing of details for all services registered on the dev server.</li>
     </ul>
   </li>
   <li>Register a new  service on dev
     <ul>
     <li>Look in your service list you just printed and find a service that has a
         service type of: http://ecoinformatics.org/identifierservice-1.0.0</li>
     <li>Get the service ID and use it to get the xml description from dev metacat by going to:</br>
         http://kepler-dev.nceas.ucsb.edu/kepler/metacat/&lt;service_id&gt;</li>
     <li>Save the file to disk</li>
     <li>Edit the file and change the id to something unique and the description to be something
         easily recognizable.</li>
     <li>In the browser, go to: http://kepler-dev.nceas.ucsb.edu/kepler/style/skins/dev/login.html</li>
     <li>Log in and make note of the sessionId that was returned</li>
     <li>In Eclipse, go to the green run button dropdown and choose "Open Run Dialog"</li>
     <li>Right click on the "RegistryServiceClient noargs" configuration you created earlier and choose "duplicate".</li>
     <li>Name your new configuration "RegistryServiceClient add-test dev.nceas"
     <li>Go to the Arguments tab and enter: add &lt;sessionId&gt; &lt;xml_file_path&gt; http://dev.nceas.ucsb.edu/registry/services/RegistryService
       <ul>
       <li>This conforms to the add usage we saw earlier</li>
       <li>The &lt;sessionId&gt; is the id you got after loggin in via the dev skin.</li>
       <li>The &lt;xml_file_path&gt; is the full path to the descriptor file you downloaded and modified.</li>
       <li>GSH always refers to the server where the registry database is held.</li>
       </ul>
     </li>
     <li>Choose "Run"</li>
     <li>Proceed past the project error warning dialog</li>
     <li>You should see a message saying: "The new id is &lt;id&gt;, where &lt;id&gt; is the unique id
         you added to the service descriptor file.</li>
     <li>Follow the instructions shown above to list services to make sure your new service shows up</li>
     </ul>
   </li>
   </ul>
-            daigle
+  <a name="LoadTesting"></a><div class="header1">Load Testing</div>
   <p>This section dicussed the available load testing code and its usage.</p>
   <a name="LoadTestCodeFiles"></a><div class="header2">Load Test Code Files</div>
   <p>The code to do load testing is located in the metacat project in this directory:</p>
      <div class="code">&lt;metacat_src&gt;/test/stress-test</div>
   <p>The test code files are written in python for the following tests:</p>
   <ul>
   <li> read - read-load-test.py </li>
   <li> insert - insert-load-test.py </li>
   <li> squery - squery-load-test.py </li>
   </ul>
   <p>While these can be run directly from the command line, there is also a driver
     file written in bash for convenience named: load-test-driver.sh</p>
   <p>The insert and squery tests rely on the following template files respectively: </p>
     <div class="code">insert.xml.tmpl and squery.xml.tmpl</div>
   <p>The insert and squery tests rely on dictionary files to create unique document IDs.
     These files are generated using a shell script named:</p>
     <div class="code">generate-dictionaries.sh</div>
   <p>Each of these files will be discussed in the next sections</p>
   <a name="GeneratingDictionaryFiles"></a><div class="header2">Generating Dictionary Files</div>
   <p>The insert and squery tests (see following sections) will need to create unique document IDs to avoid conflicts and to bypass caching mechanisms. The dictionary files are created by running:
      <div class="code">./generate-dictionaries.sh</div>
   <p>This will create a separate file for each letter of the alphabet that looks like:</p>
      <div class="code">dictionary-a.txt, dictionary-b.txt, etc.</div>
   <p>Each file will contain all the five letter word combinations that start with the
     letter associated with that file. You should run this script right away, as it takes a little
     time to run.</p>
   <a name="InsertLoadTest"></a><div class="header2">Insert Load Test</div>
   <p>The insert load test is run via a python script with the following usage:</p>
      <div class="code">./insert-load-test.py &lt;letter&gt; &lt;iterations&gt; &lt;interval&gt; &lt;host&gt; 2>&1 &</div>
   <p>Where:</p>
   <ul>
   <li> letter - the letter of the dictionary you want to use to generate doc IDs.</li>
   <li> iterations - the number of inserts you would like the test to perform.</li>
   <li> interval - the delay in seconds between each insert. You can enter a decimal for
     less than one second.</li>
   <li> host - the server that is running the instance of metacat you are load testing.
     You should not be running the test drivers on the same machine as metacat, since that
     could affect the outcome of the load test.</li>
   </ul>
   <p>The insert test will iterate through the dictionary for the letter you have specified.
     For each word, it will create a doc ID that looks like:</p>
      <div class="code">&lt;word>&lt;epoch_date&gt;.&lt;epoch_date&gt;.1</div>
   <p>For instance, if the test started at epoch date 123914076495 and the 67th word in the
     dictionary file (for letter c) is caacp, your doc ID will look like:</p>
      <div class="code">caacp123914076495.67.1</div>
   <p>This docid is subtituted for each values of @!docid!@ in the insert template at:</p>
      <div class="code">insert.xml.tmpl</div>
   <p>Each doc will then be inserted into Metacat using the metacat.py interface file.</p>
   <p>Output will be written to a file named:</p>
      <div class="code">insert-&lt;letter&gt;.out</div>
   <p>Note that you can run several of the insert tests at the same time. You should run
     each against a different letter to avoid doc ID naming conflicts and to be able to
     view the output from each test in a different output file. See the load-test-driver.sh
     for some examples.</p>
   <a name="SQueryLoadTest"></a><div class="header2">SQuery Load Test</div>
   <p>The squery load test is run via a python script with the following usage:</p>
      <div class="code">./squery-load-test.py &lt;letter&gt; &lt;iterations&gt; &lt;interval&gt; &lt;host&gt; 2>&1 &</div>
   <p>Where:</p>
   <ul>
   <li> letter - the letter of the dictionary you want to use to generate doc IDs.</li>
   <li> iterations - the number of squeries you would like the test to perform.</li>
   <li> interval - the delay in seconds between each squery. You can enter a decimal for
     less than one second.</li>
   <li> host - the server that is running the instance of metacat you are load testing.
     You should not be running the test drivers on the same machine as metacat, since
       that could affect the outcome of the load test.</li>
   </ul>
   <p>The squery test will iterate through the dictionary for the letter you have specified.
     For each word, it will create a query by substituting the dictionary word for every
     instance of @!search-word!@ in the squery template at:</p>
      <div class="code">squery.xml.tmpl</div>
   <p>Each of these queries will be run against Metacat using the metacat.py interface file.
   By changing the query for each word, we insure that we do not get cached query results
   back from Metacat, which would not cause a significant load.</p>
   <p>Output will be written to a file named:</p>
      <div class="code">squery-&lt;letter&gt;.out</div>
   <p>Note that you can run several of the squery tests at the same time. You should run
     each against a different letter to avoid doc ID naming conflicts and to be able to
     view the output from each test in a different output file. See the load-test-driver.sh
     for some examples. If you are going to run a test against the same letter more than
     once, you will need to restart the instance of Metacat being tested to clear the query
     cache on that system.</p>
   <a name="ReadLoadTest"></a><div class="header2">Read Load Test</div>
   <p>The read load test is run via a python script with the following usage:</p>
      <div class="code">./read-load-test.py &lt;letter&gt; &lt;iterations&gt; &lt;interval&gt; &lt;host&gt; 2>&1 &</div>
   <p>Where:</p>
   <ul>
   <li> letter - the read test does not use a dictionary. The letter helps us insure that
     each test reads a different document, and writes to its own output file.</li>
   <li> iterations - the number of reads you would like the test to perform.</li>
   <li> interval - the delay in seconds between each read. You can enter a decimal for
     less than one second.</li>
   <li> host - the server that is running the instance of metacat you are load testing.
     You should not be running the test drivers on the same machine as metacat, since
     that could affect the outcome of the load test.</li>
   </ul>
   <p>The read test will create a doc ID that looks like:</p>
      <div class="code">readtest-&lt;letter&gt;&lt;epoch_date&gt;.1.1</div>
   <p>It will do a single insert using that doc ID and the template at:</p>
      <div class="code">insert.xml.tmpl</div>
   <p>It will then do a read of that document from Metacat using the metacat.py interface
     file for the number of iterations you have specified.</p>
   <p>Output will be written to a file named:</p>
      <div class="code">read-&lt;letter&gt;.out</div>
   <p>Note that you can run several of the read tests at the same time. You should run
   each against a different letter to avoid doc ID naming conflicts and to be able to
   view the output from each test in a different output file. See the load-test-driver.sh
   for some examples.</p>
   <a name="TestDriverScript"></a><div class="header2">Test Driver Script</div>
   <p>There is a very simple driver script that allows you to easily run multiple instances
   and combinations of the different load tests called:</p>
      <div class="code">./load-test-driver.sh</div>
   <p>Uncomment the tests you want to run. </p>
-            daigle
+  <br>
-            daigle
+  <a href="./building-metacat.html">Back</a> | <a href="./index.html">Home</a> |
-            daigle
+  <!--a href="add next file here when one exists" -->Next<!-- /a -->
             daigle
 </BODY>
 </HTML>

Project

General

Profile

Metacat