Metacat

Change directories setting for junit test and junit nettest.

Add a set system peroperty -Djava.protocol.handler.pkgs=HTTPClient in nettest target.
Fixed the bug in running ant in gethttpclient target.

Add two targets in build file: gethttpclient and nettest. gethttpclient wil checkout morpho and ran ant get httpclient.jar(cvs doesn't have httpclient.jar). nettest will run a junit test which will involve httpclient.jar file.

Add a variable named datafilepath in it. MetaCat administrator should specify the absolute path for storing data file.

Add two variables named replicationsenddata and replicationacceptdata. Metacat administrator can configure metacat can send or accepte or both to data file

Add a property named debuglevel in it. This property will control the debug message. It set higher, more debug message will print out

Revise junit testing part and make it working.
Delete the variables for httpclient.jar and junit.jar

Add two variables junit and httpclient in cpath

Adding two properties: replication and replicationdata. Administor can config build.xml instead of metacat.properties file.

Adding a new token "context" in it.

changed some values for the release

changed some values for the release

When Metacat installed, it can automatically create data directory for data file.

updated build file. fixed the dist target so it doesn't copy the build directory into the distro.

updated authldap to get the groups to work (king of)

Add a property named systemidserver, its value="http://host.domainname:8080"
Add a token named systemidserver too.

Add a target - test in the file. Now user can type "ant test" to run the test class extends from JUnit.

fixed my tagging error

some small changes I had to make to get the QAENGINE demo to work right. this should be committing in a branch

A property named "morpho" was added. It is the path for morpho.jar. (Now, in DBQuery class some morpho package class are used). Morpho was added to cpath too. During the "install", morpho willbe copy to the target too.

Removed an obsolete filter fromthe build.xml file.

Modified the build.xml file to make it easier to set up the configuration.
There is now a "config" target in which all of the properties that are usually
modified are located. Also, now one sets the location of tomcat and the
webapps dir, and chooses a name for the tomcat context, and everything else...

took my password out of the build file

integrated the postgres and oracle properties into one build file. now, if you want to switch between oracle and postgres, you just change the 'depends' attribute in the 'init' target. also, I fixed the path to the servlet.jar file to match up with where tomcat now stores it (lib/common/servlet.jar instead of lib/servlet.jar).

Modified the build file to point at the proper eml directory so that the
"getdtd" target can find the right files to be checked out.

Committed changes to the build file so that it properly copies the Xalan
jar files instead of the oracle xml parser which has been eliminated.

fixed error with dist target so that it now copies the source correctly

fixed error I introduced when I got postgres working

updated metacat so that the xmlparserv2.jar file is no longer needed. replaced all of teh oracle xml processing with xalan and xerces.

readded the oracle stuff to te build file

made a ton of changes related to keeping oracle SQL code out of the main classes. fixed a bug where the timing of the index thread was off so when it went to index a document, the document was not already in xml_documents thus breaking the FK relation between xml_documents and xml_index. I think that bug might be the reason for the blank resultset screens in morpho. made the postgres implementation much more robust.

updated for new release

new build file with updated release number

made it so we can now use multiple accessfilestypes and packagdfiletypes in the metacat.properties file. Also fixed a bug introduced when the 'http://' was removed from behind the server name in the loaddtd.sql script and the knb.xml file

More changes to build process. No longer need the instdtd target
because it is handled by the install target. Updated installation
instructions accordingly.

Updated documentation to reflect new installprocess.

Modified build.xml to properly copy the docs into the distribution, which
required some changes in the ant token filtering scheme.

Updated build.xml to improve dtd handling so that DTDs can be included in
the distribution.

Improvements to the build process that make it easier to install the DTDs
form EML. There are now three new targets in the build.xml file:

getdtd: uses cvs to get a working copy of a tagged release of eml
  instdtd: copies the DTDs from the build directory to the install directory...

README and build changes in preparation for the 1.0.0 release of Metacat.
The files contributing to this release are being tagged in CVS as
"METACAT_1_0_0".

Added new beta5 version of eml-software dtd, and added to catalog.

Added new DTD files for the new release of EML. Changed the naming
convention for all new DTDs, so the public IDs are now consistently
versioned.

Updated metacat login semantics. Now, metacat assumes the username passed
in is the 'full' distinguished name of the user. If that fails, then
instead it tries looking up the string and seeing if it can determine
what the DN is, then uses it. The preferred method of logging in via...

Updated build.xml and README for a Beta 3 release. This is a temporary
release until the full Release 1.0 is produced next week.

Fixed problem with metacat handleReadAction where the OutputStream from the
response object was closed and an attempt to reopen a PrintWriter was made
on the same response, which is illegal. Now the OutputStream is converted
to a PrintWriter in order to write the XML error message back to the client....

server property is used in replication thus
it should include the SSL port number

Minor bug fixes following change in style handling. Fixed image locations,
cleaned up main resultset stylesheet.

Added support for multiple user interfaces by enabling style sheet
transformations to be configured from within metacat rather than
from in the database. Now, metacat uses the qformat parameter to determine
a "style set", which is mapped to an xml configuration file that...

Added new filter for style-path

Revised build.xml and metacat.properties to make it easier to
install alternative stylesheets for metacat. In the process,
replaced the deprecated copydir and copyfile commands in build.xml
with appropriate "copy" commands.

Updated build file to resotre changes that were lost when version
1.54 was committed.

changed web-base-url to http://knb.ecoinformatics.org

made ant copy the dtds

Clean up after building distribution.

Updated build.xml with new targets to create metacat distributions.
Run "ant dist" to create a non-source distribution and "ant distsrc"
to create a source distribution. Best if this is run on a clean
checkout to be sure not to include extraneous files that are not in CVS.

Modified Metacat to support large data file uploads. This is accomplished
by supporting a new content type for data sent to metacat:
multipart/form-data
which allows multiple files to be sent in a standard MIME format. The
MetacatServlet.handleGetOrPost() method now checks the incoming content...

fixed error with exception handling in metacat servlet and added new dtds to the sql script

removed descrpency between the gzipped release version of build.xml and the one in cvs

Module cleanup inpreparation for a release.

Updated build files with minor documentation changes.

Modified the license and copyright terms for many of the files. Added
a LICENSE file and a README file in preparation of a distribution.

added the data port param

Re-inserted changes from version 1.38 of build.xml that were accidentally
overwritten when version 1.39 was checked in. Now, building the protocol
handler jar file works again.

added token "install-dir" needed for DTD upload

added an ant substitution for the jdbc connection string (fixed typo)b

added an ant substitution for the jdbc connection string

added ant substitution for server and replication-log

Modified the build.xml file to support the new protocol handler classes,
which need to be built in a separate jar file bust it must be installed
as part of the tomcat servlet environment, not the web application. Now a
command of "ant protocol" will create the protocol.jar file, which must be...

fixed typo that was accidentally committed.

removed server-code param

added server-code property

added replication properties

Changed target of the javadoc builds to the build/docs/apiDocs directory
so that we no loger version track the javadoc html files -- they changes
too much between each of the times we would generate them. Also, removed
the old javadoc documentation that was found in the "docs" subdirectory.

Modified stylesheets to use the default.css file from the new KNB web site.
Also, provided a new resultset.xsl that represents a simple freetext query
of the KNB data repository. Updated build.xml to relect the location of the
new css stylesheet.

Various changes to improve consistency of the MARINE and METACAT user
interfaces as presented through the XSL->HTML conversions. Eliminated
one (extraneous) copy of the rowcol.css style sheet in favor of sharing
a single css stylesheet in xmltodb/lib/style/rowcol.css. Modified all...

- cleared copyfile of marine.properties since it is no longer in use
- added copyfile of srbProps.properties from xmltodb/lib to the servlet classpath
same like metacat.properties

fixed typ-o

update of build.xml based on Matt's recommendations

added an image-path property to get around the messed up images when loading images from tomcat. To add your own image directory,
create a directory under /opt/httpd/html/img/ and add the path to the image-path property in build.xml. Then all img tags in your documents...

Added install feature for copying dtd's to the servlet directory so that
they are accessible to the metacatservlet.

Changed release to version to alpha 8 (1.0a8) and tagged metacat in
CVS as METACAT_ALPHA_8

changed release version

Modified binaries to change classpath for metacat.jar under new
build process.

removed unneeded replace command

Added user and password to build.xml for filter substitution.

sorry, I needed new property "html-path" with value "/xmltodb" for me.
Chad, for you should be I think "/berkley"

Set a filter for installdir property

set filtering="yes" attribute on the copy command of metacat.properties

Fixed build.xml bug -- jar file was included recursively in itself, causing
ever-growing size of jar on install. Changed location of jar file that is
built (from build.dest to build.dir) to fix the problem.

Updated build process to now use a copy of the source files so that keyword
substitution can ocur before the build. This allows for substitution of
hardcoded values into the source before the compile. Currently, I am
using this feature to do the following:...

-Reorganized xmltodb module to support new install process for the new
linux server (dev.nceas.ucsb.edu). Added "build.sh" shell script that
calls ant withthe proper umask set for installation. Use:

./build.sh install

to post a new copy of the servlet and its supporting files to the install...

minor config file update

no message

changed marine line

changed build documentation

added MARINE installation instructions

minor efficiency improvement

removed catalog jar file because not needed because source code is in src dir so is included as part of metacat.jar

updated ant build.xml file for efficiency

updated build file jar references

Added srbrmi classes for authentication support