Metacat

Add support for separate LDAP and organization level configurations, and add pisco test user accounts

add dev.runConfiguration value

Remove quotes surrounding eml property values

Differentiate between tomcat directory and deployment directory.

Add a test.metacat.url value for testing and qualify other test properties with a test. prefix.

Add default skin to available skins

Add db script suffix properties

include eml201_document_corrected=false property that was lost in merge

Remove default from ldap administrator

Merge 1.9 changes into Head

removing commits that I didn't mean to make

made it so that the error and success messages from a multipart upload can be transformed using xslt. also added upload functionality to the sms skin

Check into cvs head. Change version to 1.8.1

Check into cvs head. Remove the double quotes in muser, mpassword and et al.

Add to cvs head. Add new flag to indicate if eml201 were correct or not.

Changes to remove ANT tokens for the turnkey install project

use cgi-prefix from build properties to configure the default skin for login.
removed hardcoded "ldap.ecoinformatics.org" reference in the jsp and reads it from the metacat.properties file.

Note: still uses ant token from the build.properties file, but at least centralizes the spot where the token needs to be dealt with.

Change version to 1.8.0

added skin names to properties list for working with citations that include registry name, registry url

include doctype of metadata for FGDC spatial harvesting.
also specify bounding elements for metadata_(E/W/N/S)
NOTE: bounding elements must correspond to elements as included in the enumerated indexed paths property

Change the off set number for a selection query.

Change the maxium queryresult string length.

Add a switch to control if we need query cache.

Add a new property which defines the size of query result cache.

Add a initial delay for indexing.

Add new porperty for delimitered ouput debug file.

Reset the spatial option to be true as default the value.

Add two porperties which control to write debug info to a file rather than log.

updated the kepler skin to use paging. need to do a bit more work on this to make it behave more like other web applications

Added a new class called Sitemap that is used to generate a series of XML documents representing the URLs of metacat documents following the sitemap protocol. The Sitemap class extends TimerTask so that it can be scheduled to run once a day or so. New configuration options were added to metacat.properties to control where the sitemaps are written and hw often they are updated. By default we do it once a day, as more often is overkill for search engines....

As part of a fix for http://bugzilla.ecoinformatics.org/show_bug.cgi?id=2747,
I'm adding a few configuration parameters to metacat.properties:

1) ldapconnecttimelimit limits the time in milliseconds allowed for
LDAP server connections. This reduces the impact of any single...

Added preliminary support for multiple spatial schemas in the same metacat instance .. bug 2551

Added changelog for 1.7.0 to readme file. Updated version number in properties.

Changing initial configured status back to false

Set configured to false initially. Include notification in configure process that geoserver password needs to be changed plus instructions on how to do so

Began work on a web interface for configuring metacat at runtime. This system
checks the 'configured' property when metacat starts up. If configured=false, then
it loads an HTML form containing the properties that need to be set. The user configures the properties and they are written into the metacat.properties file. Then metacat needs to be restarted. ...

Eliminated the 'release' ant tag from the rest of the files. The 'release' property is still used in build.xml for creating releases, but the filter is no longer presnt. Now, when updating the metacat files for a release, you have to set the release version in both the build.xml and the metacat.properties files.

read the schema-specific doc title from metacat properties

initial import of changes to metacat source and config files to support spatial option

Added variables to specify whether only secure ldap connections should be allowed for aunthentication.

Added param which specifies config files of which skins to read

moving indexPaths from metacat.properties to build.properties

Added packageId to the paths to be indexed

Change the code level of the MetacatHasDoc harvester operation from "Warning" to "Info". This is to reduce the amount of diagnostic output generated in the email reports to the site contact.

a new variable for the namepsaces to be indexed

Add new index value for distribution url.

Added parameter to specify how long the indexing Thread should wait for the docid to show up in xml_documents

new variables defined for the indexing threads.

Added three new options for specifying the moderators, allowed submitters and submitters who are not allowed

add new timed replication setting properties.

Added literalLayout, para and geographic Description to the list of paths to be indexed

Added new paths to be indexed to metacat.properties

Added a new property 'indexed_paths'. All the paths mentioned under this property will be configured in xml_path_index table.
See bug 2154

Updated properties to use release from the build.xml file.

Updated version in the metacat properties to 1.5.0rc1.

Changed default maxHarvests value to 0. Added logic to ignore maxHarvests value when it is set to 0 or a negative number. This allows Harvester to run indefinitely without shutting down after reaching a maximum number of harvests. The previous default value of 30 would cause Harvester to terminate after 30 harvests.

Added code such that an offset can be specified in metacat.properties for entering records into xml_queryresult table. The value of xml_returnfield.usage_count should be more than the value specified in metacat.properties for records to be entered into xml_queryresult. so if you want results for any combination of returnfields should be stored in xml_queryresult only after that combination has been requested 50 times, set this value to 50

Added new parameters to control the size of resultset for browsers and application like morpho. Also a parameter to specify the length of xml_queryresult.queryresult_string

New README in preparation for the 1.4.0 release, and updated the properties
file with the new version number.

Added a property listing servlet administrators.

Changed properties to use the xml_index table by default.

Changes directory names and paths of eml checkouts. Added eml-2.0.1 to the eml versions to be checked out.

Added params for EML2_0_0 and EML2_1_0

Add Harvester properties

Add new option for return set size.

Added a simple action for finding out the current metacat version. The information is pulled from the property file, so be sure to update the version in the property file before shipping a release.

Changed printAttributeQuery() to no longer depend on the xml_index table. Now, if useXMLIndex is false, the method will use a recursive query on xml_nodes to match paths instead of using xml_index.

Enabled stylesheet parameters to be passed through metacat even when the
'query' function is called. Previously, query would interpret all
parameters except a few hardcoded ones to be pathexpressions that should be
built into a squery. Now, metacat.properties contains a new configuration...

Moved the metacat.properties file from the jar file to now be located in
the tomcat context directory in WEB-INF. Now the metacat configuration is
editable in place. This change depends on a new Options.java class in the
utilities module, so be sure you do a "clean" build in metacat so that you...

Add a variable for data file size limit.

Add a variable for replication error log file.

Get eml2namespace from token

Add new varible httpserver.

Add entitydoctype, physicaldoctype and eml2namespace here.

Add a default contenttype in property file.

Add a varible inlinedatafilepath.

Add two varibles: schemaPath and schemaURL.

Add a variable packagedoctypeset. It has all doctypes in datapackage.

Merge cvs branch replication to cvs head.

Change the maximum connection number from 10 to 25.

Add two variables here: one is runDBConnectionRecycleThread. If it set "on", the recycle connection tread will run periodically. The other is cycleTimeOfDBConnection. This is for the recycle periodical time in milli seconds.

Add some variables to control db connection.

Add a variable named junittesturl there.

Change datafilepath's value and it should equals the property value of datafilepath in build.xml.

Add two variables replicationsenddata and replicationacceptdata

Add a variable named debuglevel here. It control the differrent debug level message will be printed.

Adding a variable "hub". If hub=super, the metacat can replicate the documents and data file which's home host is not itself.

Add a new variable datafileflag. This variable will indicate if a document is a data file in updated documents list in replication.

Change replication and replicationdata to be tokens

Add two variable: replication and replicationdata.
If administrator set replication on, replication will work. Set it off, it stop.
If administrator set both replication and replicationdata on, metacat will replicate both meta data and data. If replication is set on and replciationdata set off, metacat only replicate meta data.

Adding a variable "context " here.

Token for the server is changed to correct one.

fixed error I introduced when I got postgres working

changed dtd dir

changed the datadir again

changed datadir variable from install-dir to installdir

made a ton of changes related to keeping oracle SQL code out of the main classes. fixed a bug where the timing of the index thread was off so when it went to index a document, the document was not already in xml_documents thus breaking the FK relation between xml_documents and xml_index. I think that bug might be the reason for the blank resultset screens in morpho. made the postgres implementation much more robust.

made it so we can now use multiple accessfilestypes and packagdfiletypes in the metacat.properties file. Also fixed a bug introduced when the 'http://' was removed from behind the server name in the loaddtd.sql script and the knb.xml file

Updated properties to reflect the new EML version.

Updated documentation to reflect new installprocess.

Modified build.xml to properly copy the docs into the distribution, which
required some changes in the ant token filtering scheme.