Project

General

Profile

Activity

From 10/07/2002 to 11/05/2002

11/05/2002

09:21 AM Bug #629: unit conversion coefficients need checking
Checked, revised, and completed. Matt Jones
09:18 AM Bug #659: release tasks for eml-2.0.0rc3
DONE when the release was completed. Matt Jones

10/31/2002

08:00 AM Bug #661 (Resolved): spell check eml-attribute.xsd and synchronize with unitDictionary
eml-attribute has typos, such as filed for file and mailnly for mainly. Also,
the unitDictionary contains errors t...
Tim Bergsma

10/30/2002

01:38 PM Bug #659: release tasks for eml-2.0.0rc3
need to make sure the new schemas get installed into the
/opt/tomcat/webapps/emlparser/schema directory.
Chad Berkley
12:29 PM Bug #659: release tasks for eml-2.0.0rc3
Namespaces are now updated to rc3 (1). README and index.html were updated and
are ready to go (2). Still need to do...
Matt Jones
12:27 PM Bug #655: need better model for numeric domains for attributes
DONE. Both number type and the exclusive options are now part of the domain
expression. This allows precise numeric...
Matt Jones
12:25 PM Bug #654: scope of the unit element
DONE. Unit is now under measurement scale only where appropriate, and the
definition of ratio scale has been fixed.
Matt Jones
12:24 PM Bug #638: request for id/ref in attributeDomain
DONE. All attribute Domain elements can now be referenced to allow for this
sort of repeated use of the same domain ...
Matt Jones
12:22 PM Bug #637: attributeDomain should be required
Done. AttributeDomain is now nested within measurementScale, so it can be
required across the board, and the right ty...
Matt Jones

10/29/2002

02:59 PM Bug #634: Documentation of reference elements in the schemas
Completed. All references elements now use res:ReferencesGroup, which contains
the documentation for the references ...
Matt Jones
02:52 PM Bug #659: release tasks for eml-2.0.0rc3
5) Generate new png images Matt Jones
11:07 AM Bug #659 (Resolved): release tasks for eml-2.0.0rc3
This is a tracking bug for tasks that need to be doen for the eml-2.0.0 release.
Add any housekeeping, non-controve...
Matt Jones
11:08 AM Bug #365: Eml documentation for Seminars & LTER sites
EML Primer is postponed until December 1 in order to be ready For the next Morpho release and for the Spring KNB semi... David Blankman
09:49 AM Bug #656: physical should be repeatable
Done. Made it repeatable, and updated the documentation. RESOLVED FIXED. Matt Jones
05:54 AM Bug #654: scope of the unit element
So... an attribute with celsius units has an interval measurement scale, but one
with kelvin units has a ratio measu...
Tim Bergsma

10/28/2002

02:07 PM Bug #656 (Resolved): physical should be repeatable
Point from Barbara Benson (NTL):
The physical element in EntityGroup should be repeatable to allow individuals to
...
Matt Jones
01:07 PM Bug #654: scope of the unit element
Comments from Barbara Benson show that our previous definition of ratio scale is
wrong. It is, in fact, an extension...
Matt Jones
12:43 PM Bug #632: broken link in faq
FIXED. Checked all links in the FAQ -- all seem to be working after the fixes. Matt Jones

10/25/2002

12:58 PM Bug #655: need better model for numeric domains for attributes
Does this belong in numeric domain or in measurement scale? seems like it
qualifies measuremnt scale rather than doma...
Peter McCartney
11:02 AM Bug #655 (Resolved): need better model for numeric domains for attributes
We've found another problem with attributeDomain that needs to be fixed for the
EML 2 release. Currently, the numer...
Matt Jones
11:17 AM Bug #629: unit conversion coefficients need checking
Also, need to resolve issues with:
1) additional units that should be added
2) datetime values
3) non-linear unit co...
Matt Jones
11:11 AM Bug #629: unit conversion coefficients need checking
Tim checked these. There are some problems. See Tim's email for details.
Needs to be fixed for the EML 2 release.
Matt Jones
11:13 AM Bug #632: broken link in faq
Need to check all of the links in all of the docs before the 2.0.0 release.
Several were found to be broken, some of...
Matt Jones
11:09 AM Bug #634: Documentation of reference elements in the schemas
Should be done for the 2.0.0 release. Matt Jones
10:36 AM Bug #654: scope of the unit element
Peter,
Thanks for the excellent summary. I think I agree with this approach, excpet
for one point: the "library" att...
Matt Jones
10:02 AM Bug #654 (Resolved): scope of the unit element
Discussion of stmml has revealed several isses, one of which is the fact that
units, as expressed by stmml, are app...
Peter McCartney

10/24/2002

09:56 AM Bug #365: Eml documentation for Seminars & LTER sites
Continuing to make progress but may not be ready for 2.0 rollout. I have been
putting more effort into developing the...
David Blankman

10/18/2002

09:22 AM Bug #633: Lineage - should it be removed from the schemas?
already done David Blankman
09:20 AM Bug #626: ProcedureStepType schema needs revision to protect sequence of descriptions.
see bug 624 David Blankman
09:19 AM Bug #625: Cardinality regarding eml-methods should be corrected in two places.
see bug 624 for details David Blankman
09:18 AM Bug #624: eml-methods/methodsType needs clarification on choice/sequence
Made changes to ProcedureStepType and MethodsType. MethodsType model changed
from choice to sequence as indicated in ...
David Blankman
08:21 AM Bug #638: request for id/ref in attributeDomain
I agree that it makes sense to do it at attributeDomain rather than each of the
options below it.
I cant think of to...
Peter McCartney
08:09 AM Bug #637: attributeDomain should be required
In hindsight, i wish we had thought to put all of these things (domain,
precision, unit, etc, nested under the approp...
Peter McCartney

10/17/2002

03:00 PM Bug #638 (Resolved): request for id/ref in attributeDomain
Barbara Benson representing NTL LTER site made the following request:
> 3) Here is a suggested addition to EM...
Matt Jones
02:48 PM Bug #637 (Resolved): attributeDomain should be required
The RC2 release shows attribute/attributeDomain as an oprional element. This
used to be required, and as far as I k...
Matt Jones
01:30 PM Bug #634 (Resolved): Documentation of reference elements in the schemas
I can't remember what we decided on documenting "references" elements inside the
schemas. They are currently not doc...
David Blankman
01:26 PM Bug #633 (Resolved): Lineage - should it be removed from the schemas?
We had discussed removing lineage from the schemas. Is this still the plan? If
so someone needs to do it.
If we a...
David Blankman
11:50 AM Bug #632 (Resolved): broken link in faq
There is a broken link in the FAQ. It is in item 4 "formal specification" and
it should be linked to /software/eml...
Chad Berkley

10/14/2002

01:52 PM Bug #629 (Resolved): unit conversion coefficients need checking
The multipliers in the eml-unitDictionary.xml file need to be checked for each
unit in the file. There is also one ...
Chad Berkley
12:40 PM Bug #628: eml-physical has lit: rather than cit: references
FIXED, and the milestone now properly reflects when it was fixed. Matt Jones
12:39 PM Bug #628: eml-physical has lit: rather than cit: references
Reopening bug to reassign the target milestone to properly reflect when it was
actually fixed.
Matt Jones
10:52 AM Bug #628: eml-physical has lit: rather than cit: references
changed xmlns=lit to xmlns=cit and lit:CitationType to cit:CitationType to
maintain consistency with other modules.
David Blankman
09:59 AM Bug #628 (Resolved): eml-physical has lit: rather than cit: references
I just noticed that eml-phyiscal references citations with lit: rather that cit:
as is the case with the other modules.
David Blankman
10:02 AM Bug #627: links broken in EML FAQ
OK, fixed the link in the FAQ. RESOLVED FIXED. Matt Jones
09:46 AM Bug #627 (Resolved): links broken in EML FAQ
The EML FAQ has two broken links:
1) Pointing to the EML project members list
2) Pointing to the EML spec i...
Matt Jones

10/11/2002

12:50 PM Bug #624: eml-methods/methodsType needs clarification on choice/sequence
Im on irc right now with david and have realized that I made an error in my
files that i never caught. The intended d...
Peter McCartney
11:02 AM Bug #624: eml-methods/methodsType needs clarification on choice/sequence
Proposed change for MethodsType with name changes. David Blankman
11:00 AM Bug #624: eml-methods/methodsType needs clarification on choice/sequence
1. ProcedureStepType needs to be fixed. See attached ProcedureStepTypeFix.png
for proposed changes.
2. MethodsType s...
David Blankman
10:39 AM Bug #624: eml-methods/methodsType needs clarification on choice/sequence
Proposed changed for MethodsType with name changes David Blankman
10:38 AM Bug #624: eml-methods/methodsType needs clarification on choice/sequence
Proposed fix of MethodsType without name change. David Blankman
10:36 AM Bug #624: eml-methods/methodsType needs clarification on choice/sequence
Shows proposed changes. David Blankman
12:34 PM Bug #626 (Resolved): ProcedureStepType schema needs revision to protect sequence of descriptions.
As of RC2, the schema for ProcedureStepType is such that protocol replaces,
rather than qualifies, description. I ...
Tim Bergsma

10/10/2002

12:08 PM Bug #625: Cardinality regarding eml-methods should be corrected in two places.
I think this bug can be dropped. Bug 624, submitted near-simultaneously, raises
the same issue as part 2 (sequence...
Tim Bergsma

10/09/2002

12:48 PM Bug #625 (Resolved): Cardinality regarding eml-methods should be corrected in two places.
eml-dataset has an optional child element methods with the cardinality zero-or-
ONE. It should be zero-to-MANY. A ...
Tim Bergsma
12:30 PM Bug #624 (Resolved): eml-methods/methodsType needs clarification on choice/sequence
The current model for methodsType is a repetable choice of methodSteps (1 or
more) or sampling (0 or 1) or qualityCo...
David Blankman

10/07/2002

02:11 PM Bug #608: release preparation tasks for EML2.0.0rc2
Finished all release preparation tasks (1, 2, 3, 4). Ready to create the
distribution for RC2.
Matt Jones
02:07 PM Bug #471: eml spec overview document
Completed the spec. Its GREEAAAAT! :-) Any further issues with the spec
should be brought up in their own bug spec...
Matt Jones
02:04 PM Bug #622: redundancy in eml-physical/binaryRaster
Done. Peter removed the redundancies. RESOLVED FIXED. Matt Jones
10:14 AM Bug #622: redundancy in eml-physical/binaryRaster
nbands, ncols,nrows,ydim,xdim were all removed from the binaryRaster format
element in eml-physical because of redun...
Peter McCartney
02:01 PM Bug #588: Remove lineage tags in documentation stylesheets
Removed all lineage tags from xsd files. RESOLVED FIXED. Matt Jones
 

Also available in: Atom