Activity
From 07/06/2007 to 08/04/2007
08/03/2007
- 04:24 PM Bug #2893: VMD ordering should be flexible in forms: a few options and fall-back
- still need fall-back option, but the rest is done. Might leave it up normally, though it's likely to confuse.
- 03:40 PM Bug #2663: 2 errs left: + duplicates flagged: Project 73 (Mountain Bogs): 64 plots
- Back to Brenda. She's adding more plots.
- 03:38 PM Bug #2719: add default values for plot fields (and maybe hide fields you don't use?)
- two options on right-click menu now leave you with the option of populating new plots only, or current ones, too.
v2... - 01:27 PM Bug #2719: add default values for plot fields (and maybe hide fields you don't use?)
- Not hiding default values or skipping them on tab-stops. they should still be confirmed.
Can set default values in ...
07/27/2007
- 05:07 PM Bug #2719: add default values for plot fields (and maybe hide fields you don't use?)
- v211p51
default values can now be specified by right clicking on any control (with a value) and choosing "set as def... - 05:05 PM Bug #2898: Type only team, plot or just plot in SelectPlot field and it finds it
- v211p51.
Works pretty well, but there is a slight hiccup in the plot data form that if no plot is current, it throws...
07/26/2007
- 10:12 AM Bug #2898: Type only team, plot or just plot in SelectPlot field and it finds it
- I think I can do this fairly quickly and would make navigating between plots much faster.
- 10:11 AM Bug #2894: Entry Forms should change record souce, not use filters
- done, v211p49.
Works with regular data and embedding errors mode, too.
07/23/2007
- 11:16 PM Bug #2894: Entry Forms should change record souce, not use filters
- I have done this for plot data form and cover,stems forms, but I need to test with the errorEmbedding mode to make su...
- 10:27 PM Bug #2898 (Resolved): Type only team, plot or just plot in SelectPlot field and it finds it
- The picklist is full of the same information. Allow users just to type team-plot and it will figure out what you mea...
- 05:21 PM Bug #2897: Allow users to change the year of their base plots
- Users can change extant plots. Links from plot data and resampling form.
Users can specify year when adding new plo... - 05:03 PM Bug #2897 (Resolved): Allow users to change the year of their base plots
- Users often are entering plots that aren't year 0 into new entry tools. Thus, they will need to specify that their p...
- 03:20 PM Bug #2776: Need some queries to help us summarize issues for contractors
- Not sure if this is where to park this comment or not, probably not. But reports from entry tool now include informa...
07/20/2007
- 12:24 PM Bug #2864: Simplify level 3: no modules?, cover only by strata?
- obvious repercussions on datasheets and then entry tool
- 11:49 AM Bug #2894 (Resolved): Entry Forms should change record souce, not use filters
- Currently, entry tools display one plot at a time using filters. However, users can easily change or remove these fi...
- 09:41 AM Bug #2863: Splitting planted and natural stems while sampling: advice needed
- From a Tom Wentworth email, June 3, 2007:
[For] the two flavors of data sheets that currently record "natural" woody...
07/19/2007
- 06:40 PM Bug #2837: Deep links to maps
- I published the notice of deep links to the production site.
07/13/2007
- 02:41 PM Bug #2893: VMD ordering should be flexible in forms: a few options and fall-back
- VMD versioning added to printouts.
v211p43 - 02:29 PM Bug #2893 (Resolved): VMD ordering should be flexible in forms: a few options and fall-back
- VMD should have versioning information printed on the datasheets. This may help sort out weird issues.
Ordering... - 12:51 PM Bug #2892 (New): Weird monitoring issues: species erroneously duplicated
- Lara Rozell has had some strange issues with monitoring such as:
1) they go back and forth across the plot and som... - 12:21 PM Bug #2891 (Resolved): Strata should always be shown, but tab stops can be off if no header
- This should function more like rows and header rows instead of showing only a certain number with the picklist.
- 12:07 PM Bug #2719: add default values for plot fields (and maybe hide fields you don't use?)
- Working on this...
- 11:16 AM Bug #2890: VMD improvements
- fixed in v211p42
- 11:15 AM Bug #2890 (Resolved): VMD improvements
- Lara Rozzell thinks a full page map of stems would make things a lot better.
should add a few blank lines to botto... - 11:14 AM Bug #2882: Entry tool doesn't allow entry of source for "new" stems during monitoring
- fixed in v211p42
- 11:14 AM Bug #2887: "Empty Mod" pseudo-species causes catch-22 errors
- fixed in v211p42
- 11:13 AM Bug #2886: Error checking flags null ddh for live-stakes
- in v211p42
- 11:13 AM Bug #2881: Error checking flagged "[muliple]" as bad value.
- fixed in v211p42
07/11/2007
- 01:12 PM Bug #2887 (Resolved): "Empty Mod" pseudo-species causes catch-22 errors
- When plots are sampled, but no trees are found on them, this causes a catch-22 of errors. Either the first is an err...
- 01:11 PM Bug #2886 (Resolved): Error checking flags null ddh for live-stakes
- Error checker should be smart enough to know that Live Stakes don't require ddh to be measured.
07/09/2007
- 05:42 PM Bug #2801: reports get confused with level 2 data
- comment #2 is added as a new sheet, but only if applicable (level 2+)
comment #1 and #2 are address because vigor may... - 04:04 PM Bug #2801: reports get confused with level 2 data
- the totals for vigor and thus percentage are wrong because of null records (not included in total)
- 12:35 PM Bug #2801: reports get confused with level 2 data
- perhaps the report missing is "total vegetation" not "natural vegetation" as this makes more sense to report aggregated.
- 12:59 PM Bug #2876: Error checker thinks that non-vascular genera shouldn't have "sp."
- actually, v211p40
- 12:59 PM Bug #2876: Error checker thinks that non-vascular genera shouldn't have "sp."
- fixed v211p39
- 12:49 PM Bug #2862: Add rationale for subsampling/stem cut-offs (affects entry-tool too)
- added to version 4.1.3 of protocol. The rest of this is done, except for business rules about how and when to subsam...
- 12:39 PM Bug #2862: Add rationale for subsampling/stem cut-offs (affects entry-tool too)
- added to entry tool on v211p38
still needs to go in protocol. - 12:46 PM Bug #2885 (New): Business rules needed to guide field-samplers in subsampling & changing height cut-off
- From a Peet Email:
"Further, it may be necessary to develop guidelines
for when such modification is permissible, t... - 12:33 PM Bug #2777: add to interface: Coordinates need more metadata
- Added to protocol document, version 4.1.4
This now appears on datasheets, and in the entry tool and well as in the p... - 12:25 PM Bug #2777: add to interface: Coordinates need more metadata
- fixed in entry tool, too, and added to v211p39. Still need to add to protocol.
07/07/2007
- 06:22 AM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- Regards Comment #6
Just ignore the dead material and add a note to one of the note fields.
07/06/2007
- 01:55 PM Bug #2777: add to interface: Coordinates need more metadata
- regarding comment #3, I added to datasheets, version 39:
http://www.unc.edu/~mikelee/cvs/eep/datasheets/currentdatash... - 12:50 PM Bug #2862: Add rationale for subsampling/stem cut-offs (affects entry-tool too)
- Quoting above: "At a minimum we should require that a rationale be recorded for any change in these options from 10 c...
- 11:07 AM Bug #2787: add entry_stems.isPlanted to interface?
- Not needed anytime soon, if at all.
- 11:01 AM Bug #2875: Windows cannot find "fileName" for entryDB
- It's a vista issue.
- 11:00 AM Bug #2861: DD-MMM-YYYY needed on level 1-2 plot datasheet
- fixed. Publishing is separate issue.
- 10:57 AM Bug #2860: DS+Protocol: Add "U" = Unknown stem source
- done version 4.1.2 protocol and b38 datasheets
- 08:37 AM Bug #2860: DS+Protocol: Add "U" = Unknown stem source
- Value added to entry tool. Discussion of this needs to be added to protocol and datasheets.
- 10:29 AM Bug #2865: Datasheets & Protocol: Concrete soil (or similar) is problematic to our database
- Datasheets updated version b38.
Protocol updated 4.1.2 - 09:51 AM Bug #2883 (Resolved): Monitoring data: how to determine ordering of rows?
- There are several ways to do this. We could use the original person's ordering of records. We could also sort someh...
Also available in: Atom