Activity
From 06/14/2007 to 07/13/2007
07/13/2007
- 02:41 PM Bug #2893: VMD ordering should be flexible in forms: a few options and fall-back
- VMD versioning added to printouts.
v211p43 - 02:29 PM Bug #2893 (Resolved): VMD ordering should be flexible in forms: a few options and fall-back
- VMD should have versioning information printed on the datasheets. This may help sort out weird issues.
Ordering... - 12:51 PM Bug #2892 (New): Weird monitoring issues: species erroneously duplicated
- Lara Rozell has had some strange issues with monitoring such as:
1) they go back and forth across the plot and som... - 12:21 PM Bug #2891 (Resolved): Strata should always be shown, but tab stops can be off if no header
- This should function more like rows and header rows instead of showing only a certain number with the picklist.
- 12:07 PM Bug #2719: add default values for plot fields (and maybe hide fields you don't use?)
- Working on this...
- 11:16 AM Bug #2890: VMD improvements
- fixed in v211p42
- 11:15 AM Bug #2890 (Resolved): VMD improvements
- Lara Rozzell thinks a full page map of stems would make things a lot better.
should add a few blank lines to botto... - 11:14 AM Bug #2882: Entry tool doesn't allow entry of source for "new" stems during monitoring
- fixed in v211p42
- 11:14 AM Bug #2887: "Empty Mod" pseudo-species causes catch-22 errors
- fixed in v211p42
- 11:13 AM Bug #2886: Error checking flags null ddh for live-stakes
- in v211p42
- 11:13 AM Bug #2881: Error checking flagged "[muliple]" as bad value.
- fixed in v211p42
07/11/2007
- 01:12 PM Bug #2887 (Resolved): "Empty Mod" pseudo-species causes catch-22 errors
- When plots are sampled, but no trees are found on them, this causes a catch-22 of errors. Either the first is an err...
- 01:11 PM Bug #2886 (Resolved): Error checking flags null ddh for live-stakes
- Error checker should be smart enough to know that Live Stakes don't require ddh to be measured.
07/09/2007
- 05:42 PM Bug #2801: reports get confused with level 2 data
- comment #2 is added as a new sheet, but only if applicable (level 2+)
comment #1 and #2 are address because vigor may... - 04:04 PM Bug #2801: reports get confused with level 2 data
- the totals for vigor and thus percentage are wrong because of null records (not included in total)
- 12:35 PM Bug #2801: reports get confused with level 2 data
- perhaps the report missing is "total vegetation" not "natural vegetation" as this makes more sense to report aggregated.
- 12:59 PM Bug #2876: Error checker thinks that non-vascular genera shouldn't have "sp."
- actually, v211p40
- 12:59 PM Bug #2876: Error checker thinks that non-vascular genera shouldn't have "sp."
- fixed v211p39
- 12:49 PM Bug #2862: Add rationale for subsampling/stem cut-offs (affects entry-tool too)
- added to version 4.1.3 of protocol. The rest of this is done, except for business rules about how and when to subsam...
- 12:39 PM Bug #2862: Add rationale for subsampling/stem cut-offs (affects entry-tool too)
- added to entry tool on v211p38
still needs to go in protocol. - 12:46 PM Bug #2885 (New): Business rules needed to guide field-samplers in subsampling & changing height cut-off
- From a Peet Email:
"Further, it may be necessary to develop guidelines
for when such modification is permissible, t... - 12:33 PM Bug #2777: add to interface: Coordinates need more metadata
- Added to protocol document, version 4.1.4
This now appears on datasheets, and in the entry tool and well as in the p... - 12:25 PM Bug #2777: add to interface: Coordinates need more metadata
- fixed in entry tool, too, and added to v211p39. Still need to add to protocol.
07/07/2007
- 06:22 AM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- Regards Comment #6
Just ignore the dead material and add a note to one of the note fields.
07/06/2007
- 01:55 PM Bug #2777: add to interface: Coordinates need more metadata
- regarding comment #3, I added to datasheets, version 39:
http://www.unc.edu/~mikelee/cvs/eep/datasheets/currentdatash... - 12:50 PM Bug #2862: Add rationale for subsampling/stem cut-offs (affects entry-tool too)
- Quoting above: "At a minimum we should require that a rationale be recorded for any change in these options from 10 c...
- 11:07 AM Bug #2787: add entry_stems.isPlanted to interface?
- Not needed anytime soon, if at all.
- 11:01 AM Bug #2875: Windows cannot find "fileName" for entryDB
- It's a vista issue.
- 11:00 AM Bug #2861: DD-MMM-YYYY needed on level 1-2 plot datasheet
- fixed. Publishing is separate issue.
- 10:57 AM Bug #2860: DS+Protocol: Add "U" = Unknown stem source
- done version 4.1.2 protocol and b38 datasheets
- 08:37 AM Bug #2860: DS+Protocol: Add "U" = Unknown stem source
- Value added to entry tool. Discussion of this needs to be added to protocol and datasheets.
- 10:29 AM Bug #2865: Datasheets & Protocol: Concrete soil (or similar) is problematic to our database
- Datasheets updated version b38.
Protocol updated 4.1.2 - 09:51 AM Bug #2883 (Resolved): Monitoring data: how to determine ordering of rows?
- There are several ways to do this. We could use the original person's ordering of records. We could also sort someh...
07/05/2007
- 03:19 PM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- I fixed comment #10 (fit of "wrong" for a community).
I fixed comment #9, too, and pointed the plot at CEGL 4484.
- 03:15 PM Bug #2865: Datasheets & Protocol: Concrete soil (or similar) is problematic to our database
- entry tool: fixed, v211p37 (post)
This version is being backed up to isis (unc)
Now, datasheets need to have that o... - 01:47 PM Bug #2865: Datasheets & Protocol: Concrete soil (or similar) is problematic to our database
- "impermeable surface"
- 12:48 PM Bug #2865: Datasheets & Protocol: Concrete soil (or similar) is problematic to our database
- Forbes has spoken to someone who knows soils and there is no clear easy answer.
add "concrete soil" option: datashee... - 12:47 PM Bug #2863: Splitting planted and natural stems while sampling: advice needed
- Release a new version of data entry tool, protocol and datasheets that allow people to say "We included ALL stems in ...
- 12:27 PM Bug #2860: DS+Protocol: Add "U" = Unknown stem source
- Discussing on phone call July 5th, 2007:
We should allow a new value: uncertain (U) - 10:25 AM Bug #2882 (Resolved): Entry tool doesn't allow entry of source for "new" stems during monitoring
- When someone is monitoring, they may find stems that were new to the plot. They can enter these as new rows, but the...
07/03/2007
- 01:27 PM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- Regards comment #7.
63-4-933 has fit of "1" when assigning to CEGL3525.
This is correct; the fit is 1.
Recall 1 is ... - 08:15 AM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- Regards comment #6 on CEGL004646:
In EcoArt this is listed as historic with the following comment. "REE 7-02: Made h... - 06:21 AM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- Regards comment 9
The 340 SMRO was real
The smilax rotundifolia stems for 8-1001 total
Module 2 60
Module 3 47
...
07/02/2007
- 09:39 PM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- STATUS UPDATE for Project 75.
Bob indicated that comment 8 should be resolved by deleting the Zenobia that was sampl... - 03:03 PM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- 8-1001 has many cases of Smilax rotundifolia. One record shows 340 stems in the R module, but there are other rows i...
- 01:37 PM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- For every ecologist there is an equal and opposite methodology:
On plot 75-1-1005, the stems have a note:
"Zenobia h... - 12:54 PM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- There are a lot of plots that have more strata available and filled in on the datasheets than the data entry tool exp...
- 05:45 PM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- Plot 63-2-932 has only 5 records populated with strata (out of 48 species). We might consider removing this scant an...
- 05:23 PM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- 63-4-933 has fit of "1" when assigning to CEGL3525. Is this excellent or poor fit? I think by context it must be po...
- 05:10 PM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- 063-04-0925 was originally classified as CEGL004646: Nyssa aquatica - Nyssa biflora Saturated Forest, but this value ...
- 04:51 PM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- fixed new species that were in the database.
- 04:28 PM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- above excel file can be found here:
\\bioark\peetlab\cvs - 03:16 PM Bug #2666: ready for DBA: Project 76 (Elizabeth City, NC): 52 plots
- Data errors have been resolved. Moving on to DBA process and Spp check.
- 01:14 PM Bug #2881 (Resolved): Error checking flagged "[muliple]" as bad value.
- When users select more than one value, the list fills in [multiple] as the value. We need to allow this and ignore t...
06/28/2007
- 12:29 PM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- 75-1-1005 differentiates between Woodwardia virginica (live) and Woodwardia virginia (dead).
Cover values are 9's an... - 11:59 AM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- There are actually 52 plots, not 53.
- 11:53 AM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- Fixed the above Nyssa stems that were smaller than 40cm in the biglist. Put them in the 35-40 tally.
- 11:45 AM Bug #2664: 5 errs remain: Project 74 (Cape Fear Riparian): 62 plots
- I have resolved the errors here (ignoring for the moment the duplicates), except for the species with no info. Those...
06/25/2007
- 08:48 AM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
> > Details:
> > 075-02-1001, Nyssa biflora in R has 2 stems (36, 38) that are <40 cm DBH but
> > are written into t...- 06:20 AM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- (In reply to comment #1)
> Project 75 is squeaky clean!
>
> The only minor issue is 2 stems that are smaller than 40... - 08:45 AM Bug #2666: ready for DBA: Project 76 (Elizabeth City, NC): 52 plots
- (In reply to comment #2)
> (In reply to comment #1)
> > imported into new data entry tool version 2.1.0
> >
> > igno... - 07:12 AM Bug #2666: ready for DBA: Project 76 (Elizabeth City, NC): 52 plots
- (In reply to comment #1)
> imported into new data entry tool version 2.1.0
>
> ignored 2 errors about height range a... - 06:13 AM Bug #2664: 5 errs remain: Project 74 (Cape Fear Riparian): 62 plots
- (In reply to comment #2)
> A) 59 plots had no taxonomic reference filled in. 3 plots did (all 3 had
> Weakley Jan 1,... - 06:04 AM Bug #2664: 5 errs remain: Project 74 (Cape Fear Riparian): 62 plots
- (In reply to comment #2)
> A) 59 plots had no taxonomic reference filled in. 3 plots did (all 3 had
> Weakley Jan 1,...
06/22/2007
- 07:55 PM Bug #2837: Deep links to maps
- I added a paragraph to introduce this new function. Please check the test website at: http://herbarium.unc.edu/seflor...
- 04:43 PM Bug #2664: 5 errs remain: Project 74 (Cape Fear Riparian): 62 plots
- There are 32 duplicate species on plots and 2238 duplicate stems, mostly in the R module. Looks like they didn't lum...
- 03:43 PM Bug #2663: 2 errs left: + duplicates flagged: Project 73 (Mountain Bogs): 64 plots
- 33 species duplicated on plots and 4 stems duplicated within a module.
- 02:45 PM Bug #2663: 2 errs left: + duplicates flagged: Project 73 (Mountain Bogs): 64 plots
- Plot 9-53 does not exist, apparently.
- 02:42 PM Bug #2663: 2 errs left: + duplicates flagged: Project 73 (Mountain Bogs): 64 plots
- There are 64 plots, not 65.
- 12:27 PM Bug #2663: 2 errs left: + duplicates flagged: Project 73 (Mountain Bogs): 64 plots
- adding forbes and bob to cc.
Only things left on this project is to check a few plots for plot-level subsampling (... - 12:23 PM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- 19 errors initially.
ignoring 9 errors of no species on stem entry form - plots had no trees
ignoring 3 errors of ... - 11:12 AM Bug #2666: ready for DBA: Project 76 (Elizabeth City, NC): 52 plots
- imported into new data entry tool version 2.1.0
ignored 2 errors about height range and total cover missing for stra...
06/21/2007
- 04:33 PM Bug #2665: Ready for DBA process: Project 75 (Singletary Lake, NC): 52 plots
- Project 75 is squeaky clean!
The only minor issue is 2 stems that are smaller than 40cm DBH that are listed individu... - 03:37 PM Bug #2664: 5 errs remain: Project 74 (Cape Fear Riparian): 62 plots
- A) 59 plots had no taxonomic reference filled in. 3 plots did (all 3 had Weakley Jan 1, 2006). Add Weakly '06 for a...
- 02:24 PM Bug #2664: 5 errs remain: Project 74 (Cape Fear Riparian): 62 plots
- imported into version 2.1.0 database, grabbing custom Lat/Long fields into realLat and realLong
- 12:16 PM Bug #2662: Unfolding: Project 64 (Brunswick Co. NC): 88 plots
- Lots of duplicates, unfortunately. 20 in herbs and 33 lines in trees, the most offensive plot being 4-972, which loo...
- 12:05 PM Bug #2662: Unfolding: Project 64 (Brunswick Co. NC): 88 plots
- Additional problems:
plot 064-09-0960 has no communities linked into it, but two classification attempts, it would ... - 11:14 AM Bug #2662: Unfolding: Project 64 (Brunswick Co. NC): 88 plots
- cleaned up new species added a bit. Some fields weren't used well, other species were added as duplicates.
- 10:59 AM Bug #2662: Unfolding: Project 64 (Brunswick Co. NC): 88 plots
- Now everything is resolved for project 64. Excel spreadsheets also updated on Bioark\Peetlab\CVS
- 09:48 AM Bug #2662: Unfolding: Project 64 (Brunswick Co. NC): 88 plots
- (In reply to comment #4)
> Now just 2 issues left:
>
> a) whether or not to make up stratum definitions where lacki... - 08:00 AM Bug #2662: Unfolding: Project 64 (Brunswick Co. NC): 88 plots
- Now just 2 issues left:
a) whether or not to make up stratum definitions where lacking (2 plots). MTL leans toward... - 11:52 AM Bug #2879 (New): Need a zoom in on community classification from plot data form
- This portion of the form rapidly becomes too small. Need a pop-up form that shows the same info, but with more space.
- 11:23 AM Bug #2663: 2 errs left: + duplicates flagged: Project 73 (Mountain Bogs): 64 plots
- and possibly these should be checked:
9-16, 9-39, 9-55, 9-56, 9-62, 9-65 all lack plot-subsapling and plot-subtree
v... - 08:04 AM Bug #2663: 2 errs left: + duplicates flagged: Project 73 (Mountain Bogs): 64 plots
- last bit of the last comment should read:
remaining errors:
073-09-0017 has no info about >>a row on the stem form... - 09:31 AM Bug #2878 (Resolved): Check and standardize fit across all projects
- It may be possible that some projects have 1=best fit whereas others have 5=best fit. Need to check this (how?) and ...
06/20/2007
- 07:00 PM Bug #2837: Deep links to maps
- Great. Now we just need to document this functionality on the 'About' page.
- 06:57 PM Bug #2842: Incorrect mapping of nominal concepts
- Your proposed rule seems appropriate. At a minimum we check to see whether there is an equal-rank but different (and...
- 05:45 PM Bug #2663: 2 errs left: + duplicates flagged: Project 73 (Mountain Bogs): 64 plots
- There is a readme file on Bioark in the folder for this project that says this:
18 are because of plots that have no... - 05:38 PM Bug #2663: 2 errs left: + duplicates flagged: Project 73 (Mountain Bogs): 64 plots
- Species issues on this project, as new species were added for "sp." issues: Sphagnum, Rubus
- 05:17 PM Bug #2663: 2 errs left: + duplicates flagged: Project 73 (Mountain Bogs): 64 plots
- imported original entry tool to a version 2.1.0 entry tool.
preformed error checking: 141 errors (ouch!)
- 05:07 PM Bug #2877 (Resolved): Access 2007 issues
- This bug is a tracking bug for Access 2007 issues in the entry tool and access in general.
1) seems to ask twice i... - 04:54 PM Bug #2662: Unfolding: Project 64 (Brunswick Co. NC): 88 plots
- of the 43 errors, only 8 are not dealing with a plot that has no trees. The database flags these as errors, but like...
- 04:40 PM Bug #2662: Unfolding: Project 64 (Brunswick Co. NC): 88 plots
- I resolved 3 errors associated with species list and "sp." in the "unknown sp." line. 8 errors are due to plot lacki...
- 04:27 PM Bug #2662: Unfolding: Project 64 (Brunswick Co. NC): 88 plots
- Imported into version 2.1.0 of the entry tool.
56 errors found in the new entry tool with this data. - 04:32 PM Bug #2876 (Resolved): Error checker thinks that non-vascular genera shouldn't have "sp."
- But that's fine, generally. One could look at whether or not there was something in the species field of the carSpLi...
- 04:12 PM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- Data have been imported into entry db version 2.1.0
- 04:11 PM Bug #2661: comments in XLS resolve: Project 63 (Francis Marion NF): 54 plots
- Forbes and Michael looked through this data on June 7, 2007 and determined that there were still errors awaiting fixing.
- 03:14 PM Bug #2871: stem mapping improvements needed
- Forgot to resolve this bug just a moment ago.
- 03:14 PM Bug #2871: stem mapping improvements needed
- finished these upgrade and tested them with messy data and the maps were very legible and helpful.
- 03:12 PM Bug #2723: Add "weird" taxa to new CVS Entry and Archive databases
- Done. Backedup to my local machine until FTP access to UNC is restored.
- 11:56 AM Bug #2723: Add "weird" taxa to new CVS Entry and Archive databases
- added to archive, now v101
added to entry v211p36.
todo: backup to UNC - 11:08 AM Bug #2856: Make sure the sub-sapling only applies to saplings at level 2-3, not trees
- This is not a problem.
- 10:56 AM Bug #2875: Windows cannot find "fileName" for entryDB
- This may be a Windows Vista issue. Thus far, it only occurs if I double click on the icon to open the file. If I ope...
- 10:17 AM Bug #2875: Windows cannot find "fileName" for entryDB
- Doesn't appear when compacting and repairing then starting back up.
- 10:15 AM Bug #2875 (Resolved): Windows cannot find "fileName" for entryDB
- This is an odd error that seems to be related to the starting up mechanism of the entry tool.
06/19/2007
- 06:24 PM Bug #2874: Taxon Search drop down list - keyboard navigation problematic
- Fixed. It was fine in IE but not in Mozila. Now it should be OK in both.
- 03:09 PM Bug #2874 (Closed): Taxon Search drop down list - keyboard navigation problematic
- The drop down list that appears as you type into the taxon search box is only navigable with the mouse. When you pre...
06/17/2007
- 12:13 PM Bug #2810: Print function for maps does not work
- Added notes beside the print icon as '(To print, popups should be allowed from seflora website)'.
- 11:56 AM Bug #2837: Deep links to maps
- Sorry, the current links created automatically by the email server are broken at the space in the species names. Plea...
- 11:51 AM Bug #2842: Incorrect mapping of nominal concepts
- The issue is that the Weakley concepts are not considered when we infer the relationships to nominal concepts. Go bac...
- 11:21 AM Bug #2843: Only final collector listed for specimens
- Java querying classes are changed to retrieve all the collectors ordered by the orders of the collectors. See Quercus...
06/14/2007
- 12:23 PM Bug #2871: stem mapping improvements needed
- Done, but could use a test with real data:
1) If stems have the same X,Y they should have the same letter on the map,... - 09:09 AM Bug #2871: stem mapping improvements needed
- comment #2 is done:
Also, it would be helpful to display stemCodeID on the form for resampling (not
TreeLineID, but t... - 08:33 AM Bug #2871: stem mapping improvements needed
- FIXED: 2) the borders of the plot overlap the letters on stems, making it hard to
read. Should be reversed.
v211p2 - 08:29 AM Bug #2871: stem mapping improvements needed
- Comment #1 resolved (211p2)
- 07:58 AM Bug #2720: Reorganize the Advanced Options Form into tabs?
- Not sure when or even if this is needed.
- 07:19 AM Bug #2859: Rebar should be capped if used.
- added to version 4.1.1
- 06:54 AM Bug #2867: Reverse Migrate New archive data into old archive
- depends on other bugs, so I am marking this as "new" not "assigned" (aka
something I am working on now) - 06:54 AM Bug #2869: Migrate OLD ARCHIVE to the NEW ARCHIVE
- depends on other bugs, so I am marking this as "new" not "assigned" (aka something I am working on now)
Also available in: Atom