Project

General

Profile

Activity

From 02/24/2011 to 03/25/2011

03/25/2011

06:12 PM Bug #5357: invocation problems with Distributed Composite Actor Options dialog
for quick improvement, dialogue messages are updated to be more clear at version 27366. jianwu jianwu
05:35 PM Bug #5357: invocation problems with Distributed Composite Actor Options dialog
One more ER - if the actor is already distributed, maybe the alert can say something like "this actor is already dist... Derik Barseghian
05:30 PM Bug #5357: invocation problems with Distributed Composite Actor Options dialog
After explaining to Derik, he agreed the above behavior is correct. We also agreed that a visual indication of some s... jianwu jianwu
05:32 PM Bug #5358: CompositeActor name can disappear
fixed at trunk version 27362. jianwu jianwu

03/24/2011

07:07 PM Bug #5358 (Resolved): CompositeActor name can disappear
If in master-slave you drag out a CompositeActor, and right-click Distribute this actor, the Distributed Composite Ac... Derik Barseghian
07:06 PM Bug #5357 (New): invocation problems with Distributed Composite Actor Options dialog
Sometimes the Distributed Composite Actor Options (DCAO) dialog doesn't come up when it should, and sometimes it appe... Derik Barseghian

03/23/2011

11:34 AM Bug #5356 (Resolved): ArchivingDataturbine workflow couldn't update the second sensor's lastArchiving time in command line mode
There are two sensors in the dataturbine actor.
When I ran the workflow in command line mode, i found the workflow c...
Jing Tao

03/22/2011

04:33 PM Bug #5303: The workflow which archive sensor data into metacat can upload data even no new data was generated
This issue is the TimeDifference class doesn't compare the last time of archiving with current latest data. Now we ad... Jing Tao
04:30 PM Bug #5319: The workflow which archive sensor data into metacat can upload incorrect data set when new data is coming
This is bug on TimeDifference class. I wrote another class MetadataRangesDeterminer class to replace it. This issue w... Jing Tao
04:30 PM Bug #4746: ability to create a Site Layout report
Ben and I brainstormed a bit on this too, we might be able to go with option 1), utilize Reporting, by adding some ne... Derik Barseghian
03:51 PM Bug #5350: Kepler doesn't close completely
Mental note: do not remove window listeners during windowClosing() or windowClosed() will never get called!!! Aaron Aaron
02:11 PM Bug #5355 (Resolved): actor documentation not included on instantiation
If you use Tools=>Instantiate Component for a MyActor.java, the actor documentation is not included in the generated ... Derik Barseghian
05:40 PM Bug #5354 (New): Integrate Kepler Wiki Into Kepler Help
Sven has an idea. When running Kepler, there should be two types of help. One for users and one for developers. Both ... David Welker

03/17/2011

11:10 AM Bug #5346: Kepler 2.2r3 Mac OS 64-bit Matlab demo fails with 'no suitable image found'
Ok, I have my Matlab license situation fixed.
I'm running a 64bit Matlab R2009b with Mac OS 10.5.8 and
java.version ...
Christopher Brooks
11:09 AM Bug #5346: Kepler 2.2r3 Mac OS 64-bit Matlab demo fails with 'no suitable image found'
Ok, I have my Matlab license situation fixed.
I'm running a 64bit Matlab R2009b with Mac OS 10.5.8 and
java.version ...
Christopher Brooks

03/16/2011

04:06 PM Bug #5346: Kepler 2.2r3 Mac OS 64-bit Matlab demo fails with 'no suitable image found'
Try to be clear about my tests. If I use kepler.sh to start Kepler, the matlab demo workflow pointed by Christopher r... jianwu jianwu

03/15/2011

04:54 PM Bug #5352: build-area-2.1 is not working and build-area-2.2 is needed for kepler-2.2 release.
The new build-area-2.2 seems have problem to check out ptolemy. Here is the error I got when I first use 'ant change-... jianwu jianwu
03:38 PM Bug #5352: build-area-2.1 is not working and build-area-2.2 is needed for kepler-2.2 release.
Nice catch.
I have added a build-area-2.2.
For the problem with the build-area-2.1, you simply have to rename build...
David Welker
01:56 PM Bug #5352 (Resolved): build-area-2.1 is not working and build-area-2.2 is needed for kepler-2.2 release.
I didn't see build-area-2.2 module for kepler-2.2 at https://code.kepler-project.org/code/kepler/releases/release-bra... jianwu jianwu

03/12/2011

05:14 PM Bug #5351 (Resolved): Couldn't open a composite actor at the second time
The kepler is in sensor-view suite.
1. Open a composite actor, do some changes.
2. Close the composite actor.
3. S...
Jing Tao

03/11/2011

10:09 AM Bug #5346: Kepler 2.2r3 Mac OS 64-bit Matlab demo fails with 'no suitable image found'
I'm having Matlab licensing problems, but when I run
$PTII/bin/vergil $PTII/ptolemy/matlab/demo/MatlabExpression/Matl...
Christopher Brooks
08:31 AM Bug #5346: Kepler 2.2r3 Mac OS 64-bit Matlab demo fails with 'no suitable image found'
Looks like your DYLD_LIBRARY_PATH is missing /Applications/MATLAB_R2009b.app/bin/maci64 for 64bit and /Applications/M... Daniel Crawl
06:20 PM Bug #5346: Kepler 2.2r3 Mac OS 64-bit Matlab demo fails with 'no suitable image found'
I can see '64-bit(maci64)' in the figure if I click 'help->About MATLAB'. So if you do not have it, it should be 32 bit? jianwu jianwu
05:17 PM Bug #5346: Kepler 2.2r3 Mac OS 64-bit Matlab demo fails with 'no suitable image found'
I'm running Mac OS 10.5.8.
I have a 32-bit Java 1.5 JVM
and a 64-bit Java 1.6 JVM
I'm not sure if my Matlab is 32-bi...
Christopher Brooks
05:00 PM Bug #5346: Kepler 2.2r3 Mac OS 64-bit Matlab demo fails with 'no suitable image found'
I can run Matlab actor on my mac 10.6 64bit machine. My java is 1.6 64bit, and my matlab is R2010a 64 bit.
Christoph...
jianwu jianwu

03/10/2011

02:24 PM Bug #5350 (Resolved): Kepler doesn't close completely
I've noticed that when I close Kepler the process does not completely quit out. Not sure if this is due to recent me... Aaron Aaron
11:41 AM Bug #5349 (Resolved): Cannot open KAR file after modifying it.
Here is the use case.
(1) Save a newly created workflow as Foo.kar.
(2) Search for "Foo" and find Foo.kar in the ...
David Welker
11:36 AM Bug #5348 (Resolved): Opening KAR or opening workflow under KAR behaves differently.
If I create a new workflow and save it as Foo.kar, then when I search for "foo, I will find a KAR called Foo.kar whic... David Welker
05:15 PM Bug #5347 (New): DataTurbine actor should support Start Time with sub-second accuracy
DT actor Start TIme parameter should support sub-second accuracy. It would be nice if it accepted dates specified in ... Derik Barseghian
04:39 PM Bug #5332: cr1k_d doesn't reliably connect to logger
Dan fixed the path parsing bug.
Dan and I both still get the RING errors though, so leaving this bug open.
Derik Barseghian
04:25 PM Bug #5332: cr1k_d doesn't reliably connect to logger
Dan and I tracked the
[ERR] Response Code is not "complete(0x00)" (0E)
error down to a path parsing problem in pakb...
Derik Barseghian

03/09/2011

08:28 AM Bug #5344: Kepler ships open source software and needs to include license files
Good that the license.txt files are there, is
there anyway to view them from within Kepler?
When I click on Help | Mo...
Christopher Brooks
07:02 AM Bug #5344: Kepler ships open source software and needs to include license files
In Kepler, each module has a licenses.txt file that should document the licenses in any third-party jars. David Welker
05:01 PM Bug #5344 (New): Kepler ships open source software and needs to include license files
How do I view the licenses of the pieces of software that
are shipped with Kepler?
I did an analysis for Ptolemy...
Christopher Brooks
07:08 AM Bug #5194: demos are difficult to find
The second comment is a duplicate of bug 5331. This issue has since been addressed. David Welker
05:14 PM Bug #5194: demos are difficult to find
In Kepler2.2rc3, how do I run the demos?
Help -> Kepler Documentation says:
"Workflow Demonstration Examples
Note t...
Christopher Brooks
05:49 PM Bug #5346 (Resolved): Kepler 2.2r3 Mac OS 64-bit Matlab demo fails with 'no suitable image found'
Under the Kepler-2.2r3 dmg installer, Mac OS X 10.5 with 64bit Java,
The Matlab demo at
Help -> Kepler Documentatio...
Christopher Brooks
05:26 PM Bug #5345 (Resolved): Kepler 2.2rc3 Copyright should be updated to 2011
Help -> Kepler Documentation -> click on "license"
yields:
"Kepler Copyright
This software is protected by this ...
Christopher Brooks
04:35 PM Feature #5343 (New): Add optional Console view
When Kepler is not started from the command line, messages to standard output will not be visible. An optional panel ... Sven Koehler

03/08/2011

02:51 PM Bug #5342 (Resolved): ant update hangs if the svn certificate changes (and possibly always hangs the first time)
I was doing "ant update" and the process hung while
updating build-area. I suspect that this issue will affect any
...
Christopher Brooks
02:43 PM Bug #5322: dcd_mgr crashes often
Fixed: need to join or detach all created threads. Daniel Crawl
12:15 PM Bug #5333: 2.2 rc3: getenv("") doesn't work for mac installation.
another problem for kepler.app is that it may choose a different JVM different with terminal. One partner has both ja... jianwu jianwu

03/07/2011

01:28 PM Bug #5341: Belkin f5u409 usb=>serial dongle periodically stops working
I tried a ("the purple one") prolific pl2303 usb-serial dongle on the gumstix. Ubuntu recognized the dongle, but I wa... Derik Barseghian

03/05/2011

06:35 PM Bug #5341 (New): Belkin f5u409 usb=>serial dongle periodically stops working
Sometimes the Belkin dongle gets in a state where all 3 of its LEDs stay off. This corresponds with being unable to r... Derik Barseghian
04:43 PM Bug #5095: test kepler and wrp for memory leaks
Many ActionListeners hold references to the main Top frame, especially in the menus. Our menu system is pretty funky... Aaron Aaron

03/04/2011

03:15 PM Bug #5340: Miss a dollar sing ($) when an actor references a parameter.
Derik and I also found out, sometimes we don't need a dollar sign to reference the parameter.
This is VERY confusing!
Jing Tao
03:05 PM Bug #5340 (New): Miss a dollar sing ($) when an actor references a parameter.
On Figure 3.20 (page 66) of KeplerUserManual-2.1.0.doc, it shows how to reference a parameter OutputDir. It shows:
...
Jing Tao
01:29 PM Bug #5337: NPE from WorkflowManager when configuring actor within composite
fixed at r27259 Derik Barseghian
05:59 PM Bug #5337 (Resolved): NPE from WorkflowManager when configuring actor within composite
Sometimes when you right-click Configure Actor an actor within a composite, and actually make a change, you'll get an... Derik Barseghian
10:18 AM Bug #5335: SpanToDT should write metadata first rather than data when it starts up
Yeah, now it wrote metadata first:
[run] connected to span data.
[run] connected to span metadata.
[run...
Jing Tao
06:10 PM Bug #5339: In Database Query actor, the output port will be string type if you choose the output type to be "record"
We used the Display to show the result. The result looks like a record:
{ID = "gpp/CR800_sensor0", LASTTIME = "2011-0...
Jing Tao
06:05 PM Bug #5339 (New): In Database Query actor, the output port will be string type if you choose the output type to be "record"
Derik and I found that the type of the output port is string even though we chose "record" as the output type. Jing Tao
06:02 PM Bug #5338 (New): In Database Query actor, the output behavior will be different if there is no result set found when you check or uncheck outputEachRowSeparately
If there is result set found and the output type is "array":
no token will be sent if you select "outputEachRowSepar...
Jing Tao
05:45 PM Bug #5336 (New): If a user chooses "no metadata" as output format in Database Query actor, the query result only shows one column no matter the query specifies to select two or more columns
If user chooses the output type as "no metadata" (no column name will be shown in the result), and query looks like "... Jing Tao

03/03/2011

03:10 PM Bug #5323: saving Site Layout workflow makes Sensor actor parameters editable
A parameter's visibility is not stored to MoML so I added an extra check in attributedChanged to make sure a paramete... Daniel Crawl
02:39 PM Bug #5332: cr1k_d doesn't reliably connect to logger
Another failure example:
-> <MAIN> Open Serial Port: /dev/ttyUSB0 Succefully!
-> <MAIN> Connecting to datalogger...
...
Derik Barseghian
02:30 PM Bug #5335: SpanToDT should write metadata first rather than data when it starts up
I updated SpanToDT to write metadata entries before any data values. Please check if it's fixed. Daniel Crawl
11:32 AM Bug #5335 (Resolved): SpanToDT should write metadata first rather than data when it starts up
When i starts the SpanToDT, here are the statement from sdtout:

[run] archive size (in frames):1000000...
Jing Tao

03/02/2011

12:07 PM Bug #5322: dcd_mgr crashes often
I've only started paying attention to the message when dcd_mgr dies, but so far 2/2 times it dies with:
pthread_creat...
Derik Barseghian
06:22 PM Bug #5252: Plotting bugs
7) Can the Add Row button be used successfully? I can't. If I add Add Row, and then paste in a valid Name, the Ylabel... Derik Barseghian
05:21 PM Bug #5334: 2.2 rc3: kepler.sh file is not executable by default in Kepler.app/Contents/Resources/Java/ directory
Fixed. David Welker
05:17 PM Bug #5333: 2.2 rc3: getenv("") doesn't work for mac installation.
Me and Jianwu have further investigated this bug, and have determined that the issue arises simply because the enviro... David Welker
04:50 PM Bug #5095: test kepler and wrp for memory leaks
I found what might have been a leak, the _modelToFrameMap that was previously in KeplerGraphFrame seemed to not be lo... Aaron Aaron
04:28 PM Bug #5331: Errors in Help->Kepler Documentation page at kepler 2.2 rc3.
Removed the inapplicable comments about outreach. David Welker
04:07 PM Bug #5318: 2.2.0 release testing
More for Misc 2.2 tests:
* Test kepler.sh/kepler.bat to start Kepler.
* Test getenv() function.
jianwu jianwu

03/01/2011

03:52 PM Bug #5334 (Resolved): 2.2 rc3: kepler.sh file is not executable by default in Kepler.app/Contents/Resources/Java/ directory
I think many users need to use kepler.sh or kepler.bat to get console information. But in my installation on mac, Kep... jianwu jianwu
03:46 PM Bug #5333 (New): 2.2 rc3: getenv("") doesn't work for mac installation.
getenv is to get environment variable value in Kepler. It works for me in my installation on windows. On mac, it does... jianwu jianwu
02:58 PM Bug #5331: Errors in Help->Kepler Documentation page at kepler 2.2 rc3.
I found another error in this page, where says:
Workflow Demonstration Examples
Note that the demos are not included...
jianwu jianwu
02:06 PM Bug #5331: Errors in Help->Kepler Documentation page at kepler 2.2 rc3.
Got these two errors in documentation fixed. Thanks for catching! David Welker
11:23 AM Bug #5331 (Resolved): Errors in Help->Kepler Documentation page at kepler 2.2 rc3.
Two errors in the page:
1) The user mailing list at the end of the first paragraph should be kepler-users@kepler-pro...
jianwu jianwu
01:33 PM Bug #5332 (Resolved): cr1k_d doesn't reliably connect to logger
Fairly often cr1k_d fails to connect to the logger. I get output like:
CR1K sample rate should be 30 second(s)
->...
Derik Barseghian
09:25 PM Bug #5326: 2.2rc2 - upgrade config file bug workaround moves KeplerData/modules to KeplerData/modules.old instead of just configuration file dirs
Users can just copy any databases they want to retain after an upgrade manually from modules.old to modules. David Welker
09:25 PM Bug #5328: 2.2rc2 - standalone module manager won't start
Fixed. David Welker
09:25 PM Bug #5325: 2.2rc2 - documentation problems
Fixed. David Welker
07:05 PM Bug #5330 (New): Workflow Run Manager - include provenance trace file in run-kar
It sounds like provenance trace files are going to start being included in the provenance database, per execution.
...
Derik Barseghian
06:50 PM Bug #5329 (New): Workflow Run Manager - launch Provenance Browser from run-row
Manish would like to be able to launch the Provenance Browser from a new WRM right-click context menu.
With regards ...
Derik Barseghian

02/26/2011

05:40 PM Bug #5328 (Resolved): 2.2rc2 - standalone module manager won't start
On mac 10.6 and windows XP, both with java 1.6, I can't get the standalone module manager application to start. On wi... Derik Barseghian

02/25/2011

03:38 PM Bug #5327 (New): Need to fix documentation system
Our current documentation system creates a lot of unnecessary work and has excessive overhead to produce updated docu... David Welker
02:35 PM Bug #5325: 2.2rc2 - documentation problems
This reminds me.
We really do have a horrible documentation system.
An ideal system would have the following attrib...
David Welker
01:26 PM Bug #5325 (Resolved): 2.2rc2 - documentation problems
1) Most links in the pdfs don't work - you just see blue text.
2) User Manual Section 6 doesn't include changes to...
Derik Barseghian
02:03 PM Bug #5326 (Resolved): 2.2rc2 - upgrade config file bug workaround moves KeplerData/modules to KeplerData/modules.old instead of just configuration file dirs
The workflow-around for the configuration file bug is to move a user's existing KeplerData/modules to KeplerData/modu... Derik Barseghian
11:28 AM Bug #5303: The workflow which archive sensor data into metacat can upload data even no new data was generated
After partially fixing the bug 5319, i found the the running will keep uploading the last single data into metacat ev... Jing Tao
11:22 AM Bug #5319: The workflow which archive sensor data into metacat can upload incorrect data set when new data is coming
This logic issue on two inputs, start time and interval, of DataTurbineActor 3.
The start time is using the current ...
Jing Tao
11:11 AM Bug #5261: Get an error when execute the dataturbineToMetacat workflow in the second time
This bug was fixed by adding a String replacement actor. Jing Tao
05:56 PM Bug #5324 (Resolved): dcd_mgr buffer too small -- xxx Lost data.. messages
After running dcd_mgr for awhile I start getting messages like:
xxx Lost data: 2011-02-24T16:39:45.667Z CR800_sq311_...
Derik Barseghian

02/24/2011

02:11 PM Bug #5310: 2.2.0rc1 - Documentation link problems
Fixed. David Welker
 

Also available in: Atom