Activity
From 06/06/2010 to 07/05/2010
06/30/2010
- 08:51 PM Bug #5076 (New): Minimize the number of files downloaded from the Ptolemy repository.
- (12) Minimize the number of files downloaded from the Ptolemy repository.
Ptolemy is a very large project that con... - 08:50 PM Bug #5075 (New): Fix the module manager so it can show docs with any name.
- (11) Fix the module manager so it can show docs with any name.
Currently, the module manager only displays documen... - 08:50 PM Bug #5074 (Resolved): Fix the release process so modules can be released from Windows machines.
- (10) Fix the release process so modules can be released from Windows machines.
Currently, the release process ofte... - 08:49 PM Bug #5073 (Resolved): In module manager, display the current suite name as well as a fully resolved list of modules.
- (9) In module manager, display the current suite name as well as a fully resolved list of modules.
The module mana... - 08:49 PM Bug #5072 (Resolved): Move the R module out of Kepler/CORE entirely.
- (8) Move the R module out of Kepler/CORE entirely. Set up the module manager to handle the R installation process whe...
- 08:48 PM Bug #5071 (Resolved): Improve the installer so that it is automated instead of requiring so many manual steps. Also, develop streamlined release process so that minor releases 2.1, 2.2, etc. can be accomplished more rapidly.
- (7) Improve the installer so that it is automated instead of requiring so many manual steps. Also, develop streamline...
- 08:48 PM Bug #5070 (Resolved): Changing the "Available Modules" tab in the Module Manager to "Available Suites and Modules"
- (6) Changing the "Available Modules" tab in the Module Manager to "Available Suites and Modules"
This is a minor c... - 08:47 PM Bug #5069 (New): The ability to create user manuals from a wiki that is continuously updated.
- (5) The ability to create user manuals from a wiki that is continuously updated.
Currently, our user manual is pro... - 08:47 PM Bug #5068 (New): Investigate jars (why they are necessary) and upgrade whenever possible.
- (4) Investigate jars (why they are necessary) and upgrade whenever possible.
It is better for us to make the lates... - 08:46 PM Bug #5067 (New): The introduction of basic services so that module names are not referenced.
- (3) The introduction of basic services so that module names are not referenced.
Modules would just declare that th... - 08:45 PM Bug #5066 (Resolved): Fix for ImageJ so that preferences are stored in an area other than the installation space. This may require a change to ImageJ source code.
- (2) Fix for ImageJ so that preferences are stored in an area other than the installation space. This may require a ch...
- 08:42 PM Bug #5065 (Resolved): In shared or administrative installations, the ability to store modules.txt and extra modules locally. This way, the module manager will work smoothly on Windows without having to run as an administrator.
- (1) In shared or administrative installations, the ability to store modules.txt and extra modules locally. This way, ...
- 08:37 PM Bug #5064 (New): Kepler 2.1 Tracking Bug
- This bug will be used to track the new features that will be implemented in Kepler 2.1.
- 06:17 PM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
- retargeting
- 06:16 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- As of r25050 I believe I have the report LSID being properly maintained - if the user deletes, adds, rearranges, or e...
- 06:01 PM Bug #4524: no prompt to save a changed report
- Fixed at r25050 in 2.0 branch.
I'm going to wait until further work on reporting is done before i merge 2.0 branch c...
06/29/2010
- 10:41 AM Bug #4920: dynamically change toolbar buttons
- This would be useful to, e.g., disable zoom in/out and new input/output port buttons in the report designer.
One met...
06/28/2010
- 04:30 PM Bug #5062 (Resolved): create bugs, mockups, eng view page updates showing how authentication will work
- How and where will the user be prompted for credentials for the workflow scheduler? For connecting to a remote proven...
- 04:24 PM Bug #5049: Prompt for credentials when connecting to remote kepler server
- Add new tab in Preferences for configuring remote stores.
- 04:10 PM Bug #4747: import & export site layout to SensorML
- Need to find tools or apps that read SensorML.
- 03:55 PM Bug #4741: create icons for engineering view components
- Sometimes when a sensor is turned on/off, its icon color doesn't immediately change.
- 03:54 PM Bug #4762: create gui to control sensor from kepler
- Can now turn on/off and change sampling rate by changing the sensor actor's parameters. Sometimes the icon color does...
- 03:51 PM Bug #5041: display recent data next to icon
- Done. It makes the site layout look messy so we might want to turn it off. It's also somewhat redundant since the sam...
- 03:14 PM Bug #4746: ability to create a Site Layout report
- Do some UI mockups this type of specialized report associated w/ the site layout. By default a Site Layout report des...
- 02:58 PM Bug #4744: load & save site layout to local kar file
- Need to make sure the new model type has an X next to it when the KAR is in your local repo and you're not in the sen...
- 02:55 PM Bug #4744: load & save site layout to local kar file
- If we don't add the SPAN config files or wiring diagram, not much will have to be done here.
- 02:53 PM Bug #4763: create gui to access datalogger program
- Have we decided changes like adding and removing a sensor, things that require changing the program itself, are somet...
- 02:47 PM Bug #4742: create engineering view model type
- Library filtering based on model is done. I want to look into making slight GUI changes to visually differentiate an ...
06/25/2010
- 05:26 PM Bug #5061 (Resolved): Report Design Panel needs fixing wrt event listening
- Mouselisteners are used for many things in reporting, and they're causing some problems. There are times when we don'...
06/21/2010
- 03:06 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- (In reply to comment #14)
> (In reply to comment #13)
> > (In reply to comment #12)
> > > (In reply to comment #11)
>... - 11:19 AM Bug #5047: Rename the tagging docs tagging.pdf
- This has been resolved.
- 10:46 AM Bug #4751: implement "run" for site layout
- The actors are highlighted with a color reflecting their status.
06/18/2010
- 10:45 AM Bug #4706: support provenance in master-slave 2.0
- postpone it after Master-Slave 2.0.0.
06/17/2010
- 12:55 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- Postponing to sometime post 2.0. This does not affect the correct execution of the workflows.
- 12:53 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- So to sum up: Short of patching the ImageJ code, I'm not sure how to fix this. From my understanding the problem is j...
- 12:40 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- I downloaded and tried w/ a newer ij,jar, 1.43u, but no luck, C:\Program Files\Kepler-2.0-RC5\ is still the path used...
- 11:54 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- I'm able to replicate this on XP. It looks like IJ_Prefs.txt gets written to the project dir (C:\Program Files\Kepler...
- 11:41 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- This seems relevant:
http://imagej.588099.n2.nabble.com/Error-when-closing-ImageJ-td3004156.html
06/16/2010
- 05:38 PM Bug #5052 (Resolved): default file open directory of Kepler 2.0
- If I remember correctly, the default directory for 'File-->Open File...' menu item is getting-started directory in Ke...
- 05:19 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- I still saw it in RC 5. Re-open it.
In my Windows 7 64 bit machine, the failure does *not* occur if
I start Kepler u... - 02:21 PM Bug #5051: Semantically annotate during Save Archive a workflow with remote data set Error
- This is the trace. Note also warning at top about cloning:
trying to clone myworkflow but you can't clone this objec... - 01:48 PM Bug #5051 (Resolved): Semantically annotate during Save Archive a workflow with remote data set Error
- If you search for a remote data set, drag it out to canvas, then Save Archive, and then Semantically Annotate the wor...
- 09:22 AM Bug #5024: Uninstaller couldn't delete the rc3 folder on windows 7
- This should be fixed.
- 09:20 AM Bug #5008: Research Copyrights before 2.0.0 release.
- Finished.
06/15/2010
- 05:59 PM Bug #5032: Workflow Run Manager - ability to connect to different prov stores from gui actions
- I've got report layouts and instances displaying now when a workflow run manager is connected to a remote provenance ...
- 05:59 PM Bug #5050 (Resolved): Automatically filter workflow run manager runs based on selected workflow
- In Figure 6 ( https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineering-view-plan...
- 05:54 PM Bug #5049 (Resolved): Prompt for credentials when connecting to remote kepler server
- At some point in Figure 6( https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineer...
06/14/2010
- 02:57 PM Bug #5048 (In Progress): Can't clean (or do other build system operations) offline
- When I try to run "ant clean" from the sensor-view suite, I get the exception below. The module kepler-2.0.^ is not r...
- 01:39 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- (In reply to comment #13)
> (In reply to comment #12)
> > (In reply to comment #11)
> > > Sounds good. Can you poke a... - 01:12 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- (In reply to comment #12)
> (In reply to comment #11)
> > Sounds good. Can you poke around looking for any other simi... - 12:21 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- (In reply to comment #11)
> Sounds good. Can you poke around looking for any other similar problems -- e.g.
> what ha...
06/11/2010
- 04:26 PM Bug #5042: create span simulator
- The simulator now generates data for each sensor, and you can control the sampling parameters.
- 11:33 AM Bug #5047: Rename the tagging docs tagging.pdf
- I don't think kepler-tagging-ui.pdf is the documentation. I think it's some early design documents. They should proba...
- 11:29 AM Bug #5047 (Resolved): Rename the tagging docs tagging.pdf
- The tagging docs (tagging-2.0 > docs) need to be named tagging.pdf instead of kepler-tagging-ui.pdf
This is so tha... - 10:53 AM Bug #5043: Help => Modules Documentation menu not in 2.0
- Fixed Now.
06/10/2010
- 05:36 PM Bug #5032: Workflow Run Manager - ability to connect to different prov stores from gui actions
- Making a little progress on this bug. As a test I've added a temporary jbutton to the WRM that connects to provenance...
- 05:19 PM Bug #5033: Workflow Run Manager - Allow multiple instances of WRM in one Kepler instance
- I've made some progress on this bug, I've created a WorkflowRunManagerManager (could use a rename) to manage the now ...
- 03:03 PM Bug #5031: Fail to switch to other suite from module manager of Kepler-2.0-RC3
- It looks like this is working in RC4 on Lei's machine under Windows Vista too. The origins of this problem remain unk...
06/09/2010
- 06:11 PM Bug #5031: Fail to switch to other suite from module manager of Kepler-2.0-RC3
- David, I went to test this on RC4 w/ Vista but the only suite listed at the moment under Available Suites: is kepler-...
- 03:22 PM Bug #5042: create span simulator
- I've implemented part of the simulator. You can start it by running 'ant spansim' in sensor-view/.
Yet to do:
* dat... - 01:38 PM Bug #4997: SEEK/garpModel_ImageJ.xml has an exception while opening
- Closing. Workflows moved to unsupported.
- 01:10 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- Sounds good. Can you poke around looking for any other similar problems -- e.g. what happens when you have multiple c...
- 01:01 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- (In reply to comment #9)
> (In reply to comment #8)
> > Yes, it's not sufficient because scenarios like comment#6 are... - 12:38 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- (In reply to comment #8)
> Yes, it's not sufficient because scenarios like comment#6 are still possible.
>
> I think... - 11:33 AM Bug #5045 (In Progress): Add a menu to add and configure new remote kepler servers
- Figure 6 (https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineering-view-plans ) ...
06/08/2010
- 05:25 PM Bug #5044: Can't insert null record using Database Writer actor
- Corinna reports this works for her mysql DB too. Closing.
- 01:40 PM Bug #5044: Can't insert null record using Database Writer actor
- Should be fixed in trunk at r24764.
If token is nil, now inserting null into DB. I've (only) tested this with a loca... - 11:37 AM Bug #5043: Help => Modules Documentation menu not in 2.0
- (In reply to comment #4)
> (In reply to comment #3)
> > I've retried with a fresh checkout of 2.0 and the menu item i... - 11:06 AM Bug #5043: Help => Modules Documentation menu not in 2.0
- (In reply to comment #3)
> I've retried with a fresh checkout of 2.0 and the menu item is missing. I also
> retried a... - 10:48 AM Bug #5043: Help => Modules Documentation menu not in 2.0
- I've retried with a fresh checkout of 2.0 and the menu item is missing. I also retried after deleting KeplerData and ...
- 10:32 AM Bug #5043: Help => Modules Documentation menu not in 2.0
- I just checked rc4 and the moudles documentation menu item is available as expected in it as well.
- 10:11 AM Bug #5043: Help => Modules Documentation menu not in 2.0
- Derik, are you talking about release candidate 4 or are you talking about what is currently in svn in kepler/releases...
- 10:57 AM Bug #5017: ReportLayout LSID and referral list should be maintained
- Yes, it's not sufficient because scenarios like comment#6 are still possible.
I think the best approach is to roll t...
06/07/2010
- 05:33 PM Bug #5044 (Resolved): Can't insert null record using Database Writer actor
- User reports being unable to insert null record into database using Database Writer's input port -- I don't believe t...
- 05:20 PM Bug #5043 (Resolved): Help => Modules Documentation menu not in 2.0
- Under the 2.0 branch and RC4, I don't see the Modules Documentation menu item. This menu item exists on trunk. I trie...
- 04:36 PM Bug #5042 (Resolved): create span simulator
- Create a SPAN simulator that uses the SPAN control protocol to start/stop sensors, and change sampling rates. Additio...
- 04:31 PM Bug #5041 (Resolved): display recent data next to icon
- Display the most recent data value and timestamp next to each sensor icon while "running" an engineering view workflow.
- 04:15 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- So, just to be sure that I am understanding you correctly -- are you saying that using the ReportLayoutKAREntryHandle...
- 03:42 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- Hey Debi, while it may be ok to only increment the LSID whenever a report layout is saved, one of the ways a report l...
- 02:50 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- The report layout LSID is now incremented whenever the user saves a KAR file, but only if it is in the local namespac...
- 03:59 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
- The files had been moved in 2.0 but not trunk. I moved the ones in trunk.
- 01:43 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
- Why was this closed? From what I can tell Help => Modules Documentation is still broken because the files haven't bee...
- 02:51 PM Bug #4981: RIO pdfs don't show up in the Component Library
- Re-targeting for now, based on our discussion during the REAP meeting today.
- 12:35 PM Bug #4544: Enter key in Report Designer title invokes a search
- This shouldn't be that hard to fix. It actually sounds like the search field is being greedy. Can the KeyEventListene...
- 12:29 PM Bug #4544: Enter key in Report Designer title invokes a search
- No need to change anything on this bug IMO, it was filed with Importance 'minor' and targeted for 2.X.Y.
- 12:23 PM Bug #4544: Enter key in Report Designer title invokes a search
- I have looked at this again, and following the steps you describe, I can see this in the GUI. However, I don't think...
- 11:56 AM Bug #4544: Enter key in Report Designer title invokes a search
- This still happens for me on trunk, on mac and windows. A way to replicate that shows in the gui:
Type sdf into the S... - 06:59 AM Bug #4544: Enter key in Report Designer title invokes a search
- This is no longer happening for me.
- 12:16 PM Bug #4647: Write documentation for Reporting in the style of Kepler Docs
- Closing this for now, although with the disclaimer that there still may be some small changes or additions.
- 09:08 AM Bug #4524: no prompt to save a changed report
- Figured out what is happening here. Ptolemy > gui > Top _queryForSave method is being used instead of the ReportDes...
- 08:49 AM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
- Based on Deriks comments, re-targeting to wrp-2.x.y for now.
- 08:18 AM Bug #4324: ptII/module-info/revision.txt not being updated
- ptolemy/revisions.txt is not being automatically updated so I'm reopening this.
From the svn logs, it looks like the... - 07:09 AM Bug #4660: Clicking in a section header highlights all the text.
- Fixed.
- 07:08 AM Bug #4548: string tokens with newlines print the escape sequences
- Re-targeting for post 2.0.
- 07:06 AM Bug #4526: multi-line entries can be put into text items in reports, but they are displayed on a single line
- This is desired behavior, as we do not want to assume that the user would like a new line whenever the text wraps in ...
Also available in: Atom