Activity
From 06/12/2010 to 07/11/2010
07/09/2010
- 05:22 PM Bug #5091 (Resolved): Dragging and dropping report layout items NPEs
- Often when you're dragging and dropping a report item in the report designer, you get NPEs spewing on the console. Th...
- 05:15 PM Bug #5090 (New): Report Layout interface is confusing wrt locking and switching to old layouts
- I'm unhappy with how the report layout 'lock edit mode' button works. By default, it's unlocked, and when you first c...
- 04:30 PM Bug #5087: Image report items aren't shown when original image path doesn't resolve
- Worked w/ Ben to fix this in r25094 on 2.0 branch.
Needs to be merged into trunk. - 01:43 PM Bug #5087: Image report items aren't shown when original image path doesn't resolve
- The embedded images should (and I believe used to) be decoded from their base-64 characters and made into an image fi...
- 01:19 PM Bug #5087 (Resolved): Image report items aren't shown when original image path doesn't resolve
- Image report items aren't shown in the layout viewer or instance viewer when the original image path doesn't resolve....
- 03:58 PM Bug #5089 (Resolved): Replace operating system specific files with operating system specific modules.
- (14) Replace operating system specific files with operating system specific modules.
Currently, as illustrated by ... - 01:30 PM Bug #5088 (Resolved): Report designer gui difficult to use with greater than about 3-4 items
- Report designer becomes difficult to use for reports with greater than about 3-4 items. Since the panel has such a la...
- 01:15 PM Bug #5086 (New): Report instance does not show in viewer after kar open
- When opening a run kar that contains a report instance, the report instance viewer does not show the pdf. If a kar co...
- 01:09 PM Bug #4247: Application menu items sometimes disappear on OS X
- (In reply to comment #10)
> I've search for possibly offending calls to showConfirmDialog and
> showMessageDialog (t... - 01:08 PM Bug #4247: Application menu items sometimes disappear on OS X
- I've search for possibly offending calls to showConfirmDialog and showMessageDialog (those that use null as first ar...
- 10:01 AM Bug #5085 (Resolved): add table of contents to User's Guide
- The 2.0 version of the User's Guide is missing its table of contents. Add one for the 2.1 release. Thhis was notice...
07/08/2010
- 02:26 PM Bug #5084 (Resolved): Allow test releases in the same location as actual releases.
- (13) Allow test releases in the same location as actual releases.
Right now, the Kepler module manager can be conf... - 11:56 AM Bug #5083: possible to save a kar that loses the report layout
- This is fixed in 2.0, but needs to be merged into trunk.
- 11:51 AM Bug #5083: possible to save a kar that loses the report layout
- I've implemented a stopgap to this bug, with the following comment, in WorkflowManager so that reporting 2.0 can depe...
07/07/2010
- 06:36 PM Bug #5083 (Resolved): possible to save a kar that loses the report layout
- This seems like a problem with the ObjectManager.
Scenario:
User A uses Save Archive to create test.kar, it conta... - 05:25 PM Bug #5082 (Resolved): Eclipse build fails because of invalid archive
- Under Windows Server 2003, I was building the devel tree as per
the instructions at
https://kepler-project.org/deve... - 05:23 PM Bug #4191: Eclipse build is slow the first time "Copying resources to the output folder"
- The bug is that build is slow the first time under Eclipse.
For me on an older Windows 2003 Server machine, I have ab... - 04:18 PM Bug #4943: RC5 Installer Tracking Bug
- I'm closing this tracking bug because all the blockers for this bug
and 2.0.0 are fixed.
BTW - I find it easier to u... - 10:49 AM Bug #5071: Improve the installer so that it is automated instead of requiring so many manual steps. Also, develop streamlined release process so that minor releases 2.1, 2.2, etc. can be accomplished more rapidly.
- Does this mean creating an installer or using the installer?
Creating an installer:
Bug 5027: Users should be able t... - 10:45 AM Bug #5051: Semantically annotate during Save Archive a workflow with remote data set Error
- Okay, it is indeed fixed in the trunk and in the release branch. I tested the release, which did not work, but having...
- 10:11 AM Bug #5051: Semantically annotate during Save Archive a workflow with remote data set Error
- I'm pretty sure this is fixed. Will test briefly against trunk and release and close if so.
- 10:37 AM Bug #5076: Minimize the number of files downloaded from the Ptolemy repository.
- As per Kepler leadership discussion, moving this to 2.X.Y. Note that
we will have Kepler devel telcon to discuss 2.1... - 10:29 AM Bug #5072: Move the R module out of Kepler/CORE entirely.
- As per Kepler leadership discussion, moving this to 2.2.0. Note that
we will have Kepler devel telcon to discuss 2.1... - 10:27 AM Bug #5068: Investigate jars (why they are necessary) and upgrade whenever possible.
- As per Kepler leadership discussion, moving this to 2.X.Y. Note that
we will have Kepler devel telcon to discuss 2.1... - 10:26 AM Bug #5081: A system for adding and removing GUI menus.
- Documenting our current system would take about 24 hrs.
Refactoring to a different system such as RCP would take mo... - 10:25 AM Bug #5081 (New): A system for adding and removing GUI menus.
- The existing system needs documentation.
Also, refactoring to use RCP would help here - 10:22 AM Bug #5067: The introduction of basic services so that module names are not referenced.
- This should probably wait on the Ptolemy OSGI implementation, so I'm targeting
2.X.Y - 09:24 AM Bug #4342: apple-extensions module on windows make Eclipse build difficult
- Chris Weed posted the following:
I don't know if you guys ever try to build kepler on windows with eclipse,
but it t...
07/06/2010
- 06:40 PM Bug #5069: The ability to create user manuals from a wiki that is continuously updated.
- I agree that making it easier for developers to update documentation is an
excellent goal. However, it is fairly dif... - 06:33 PM Bug #4324: ptII/module-info/revision.txt not being updated
- It is important that Kepler developers use the most recent Ptolemy sources
so I'm marking this as targeting Kepler 2.... - 06:29 PM Bug #5076: Minimize the number of files downloaded from the Ptolemy repository.
- Ptolemy currently is deployable as a number of jar files that do not
include the source code.
The Ptolemy project ... - 06:02 PM Bug #5068: Investigate jars (why they are necessary) and upgrade whenever possible.
- Updating the 3rd part jars is a laudable goal and a good practice, but
quite a bit of work. I'm not sure if we have ... - 05:59 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- Bug 5066 was a duplicate of this bug.
In Bug 5066, David wrote:
(2) Fix for ImageJ so that preferences are stored in ... - 05:58 PM Bug #5066: Fix for ImageJ so that preferences are stored in an area other than the installation space. This may require a change to ImageJ source code.
- Duplicate of 5026, though this bug has a better title than 5026. I'll update 5026.
- 04:21 PM Bug #5077 (Resolved): add real inputs and outputs to sensor actor
- The output port should write the latest sampled value. One or more input ports should be added to control the sensor.
- 02:07 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- Comment#15 should be fixed now in 2.0 at r25056. Needs to be merged into trunk.
- 02:06 PM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
- Should be fixed in 2.0 now at r25056. Needs to be merged into trunk.
- 01:53 PM Bug #5061: Report Design Panel needs fixing wrt event listening
- This is fixed in 2.0, but needs to be merged into trunk.
06/30/2010
- 08:51 PM Bug #5076 (New): Minimize the number of files downloaded from the Ptolemy repository.
- (12) Minimize the number of files downloaded from the Ptolemy repository.
Ptolemy is a very large project that con... - 08:50 PM Bug #5075 (New): Fix the module manager so it can show docs with any name.
- (11) Fix the module manager so it can show docs with any name.
Currently, the module manager only displays documen... - 08:50 PM Bug #5074 (Resolved): Fix the release process so modules can be released from Windows machines.
- (10) Fix the release process so modules can be released from Windows machines.
Currently, the release process ofte... - 08:49 PM Bug #5073 (Resolved): In module manager, display the current suite name as well as a fully resolved list of modules.
- (9) In module manager, display the current suite name as well as a fully resolved list of modules.
The module mana... - 08:49 PM Bug #5072 (Resolved): Move the R module out of Kepler/CORE entirely.
- (8) Move the R module out of Kepler/CORE entirely. Set up the module manager to handle the R installation process whe...
- 08:48 PM Bug #5071 (Resolved): Improve the installer so that it is automated instead of requiring so many manual steps. Also, develop streamlined release process so that minor releases 2.1, 2.2, etc. can be accomplished more rapidly.
- (7) Improve the installer so that it is automated instead of requiring so many manual steps. Also, develop streamline...
- 08:48 PM Bug #5070 (Resolved): Changing the "Available Modules" tab in the Module Manager to "Available Suites and Modules"
- (6) Changing the "Available Modules" tab in the Module Manager to "Available Suites and Modules"
This is a minor c... - 08:47 PM Bug #5069 (New): The ability to create user manuals from a wiki that is continuously updated.
- (5) The ability to create user manuals from a wiki that is continuously updated.
Currently, our user manual is pro... - 08:47 PM Bug #5068 (New): Investigate jars (why they are necessary) and upgrade whenever possible.
- (4) Investigate jars (why they are necessary) and upgrade whenever possible.
It is better for us to make the lates... - 08:46 PM Bug #5067 (New): The introduction of basic services so that module names are not referenced.
- (3) The introduction of basic services so that module names are not referenced.
Modules would just declare that th... - 08:45 PM Bug #5066 (Resolved): Fix for ImageJ so that preferences are stored in an area other than the installation space. This may require a change to ImageJ source code.
- (2) Fix for ImageJ so that preferences are stored in an area other than the installation space. This may require a ch...
- 08:42 PM Bug #5065 (Resolved): In shared or administrative installations, the ability to store modules.txt and extra modules locally. This way, the module manager will work smoothly on Windows without having to run as an administrator.
- (1) In shared or administrative installations, the ability to store modules.txt and extra modules locally. This way, ...
- 08:37 PM Bug #5064 (New): Kepler 2.1 Tracking Bug
- This bug will be used to track the new features that will be implemented in Kepler 2.1.
- 06:17 PM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
- retargeting
- 06:16 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- As of r25050 I believe I have the report LSID being properly maintained - if the user deletes, adds, rearranges, or e...
- 06:01 PM Bug #4524: no prompt to save a changed report
- Fixed at r25050 in 2.0 branch.
I'm going to wait until further work on reporting is done before i merge 2.0 branch c...
06/29/2010
- 10:41 AM Bug #4920: dynamically change toolbar buttons
- This would be useful to, e.g., disable zoom in/out and new input/output port buttons in the report designer.
One met...
06/28/2010
- 04:30 PM Bug #5062 (Resolved): create bugs, mockups, eng view page updates showing how authentication will work
- How and where will the user be prompted for credentials for the workflow scheduler? For connecting to a remote proven...
- 04:24 PM Bug #5049: Prompt for credentials when connecting to remote kepler server
- Add new tab in Preferences for configuring remote stores.
- 04:10 PM Bug #4747: import & export site layout to SensorML
- Need to find tools or apps that read SensorML.
- 03:55 PM Bug #4741: create icons for engineering view components
- Sometimes when a sensor is turned on/off, its icon color doesn't immediately change.
- 03:54 PM Bug #4762: create gui to control sensor from kepler
- Can now turn on/off and change sampling rate by changing the sensor actor's parameters. Sometimes the icon color does...
- 03:51 PM Bug #5041: display recent data next to icon
- Done. It makes the site layout look messy so we might want to turn it off. It's also somewhat redundant since the sam...
- 03:14 PM Bug #4746: ability to create a Site Layout report
- Do some UI mockups this type of specialized report associated w/ the site layout. By default a Site Layout report des...
- 02:58 PM Bug #4744: load & save site layout to local kar file
- Need to make sure the new model type has an X next to it when the KAR is in your local repo and you're not in the sen...
- 02:55 PM Bug #4744: load & save site layout to local kar file
- If we don't add the SPAN config files or wiring diagram, not much will have to be done here.
- 02:53 PM Bug #4763: create gui to access datalogger program
- Have we decided changes like adding and removing a sensor, things that require changing the program itself, are somet...
- 02:47 PM Bug #4742: create engineering view model type
- Library filtering based on model is done. I want to look into making slight GUI changes to visually differentiate an ...
06/25/2010
- 05:26 PM Bug #5061 (Resolved): Report Design Panel needs fixing wrt event listening
- Mouselisteners are used for many things in reporting, and they're causing some problems. There are times when we don'...
06/21/2010
- 03:06 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- (In reply to comment #14)
> (In reply to comment #13)
> > (In reply to comment #12)
> > > (In reply to comment #11)
>... - 11:19 AM Bug #5047: Rename the tagging docs tagging.pdf
- This has been resolved.
- 10:46 AM Bug #4751: implement "run" for site layout
- The actors are highlighted with a color reflecting their status.
06/18/2010
- 10:45 AM Bug #4706: support provenance in master-slave 2.0
- postpone it after Master-Slave 2.0.0.
06/17/2010
- 12:55 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- Postponing to sometime post 2.0. This does not affect the correct execution of the workflows.
- 12:53 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- So to sum up: Short of patching the ImageJ code, I'm not sure how to fix this. From my understanding the problem is j...
- 12:40 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- I downloaded and tried w/ a newer ij,jar, 1.43u, but no luck, C:\Program Files\Kepler-2.0-RC5\ is still the path used...
- 11:54 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- I'm able to replicate this on XP. It looks like IJ_Prefs.txt gets written to the project dir (C:\Program Files\Kepler...
- 11:41 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- This seems relevant:
http://imagej.588099.n2.nabble.com/Error-when-closing-ImageJ-td3004156.html
06/16/2010
- 05:38 PM Bug #5052 (Resolved): default file open directory of Kepler 2.0
- If I remember correctly, the default directory for 'File-->Open File...' menu item is getting-started directory in Ke...
- 05:19 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
- I still saw it in RC 5. Re-open it.
In my Windows 7 64 bit machine, the failure does *not* occur if
I start Kepler u... - 02:21 PM Bug #5051: Semantically annotate during Save Archive a workflow with remote data set Error
- This is the trace. Note also warning at top about cloning:
trying to clone myworkflow but you can't clone this objec... - 01:48 PM Bug #5051 (Resolved): Semantically annotate during Save Archive a workflow with remote data set Error
- If you search for a remote data set, drag it out to canvas, then Save Archive, and then Semantically Annotate the wor...
- 09:22 AM Bug #5024: Uninstaller couldn't delete the rc3 folder on windows 7
- This should be fixed.
- 09:20 AM Bug #5008: Research Copyrights before 2.0.0 release.
- Finished.
06/15/2010
- 05:59 PM Bug #5032: Workflow Run Manager - ability to connect to different prov stores from gui actions
- I've got report layouts and instances displaying now when a workflow run manager is connected to a remote provenance ...
- 05:59 PM Bug #5050 (Resolved): Automatically filter workflow run manager runs based on selected workflow
- In Figure 6 ( https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineering-view-plan...
- 05:54 PM Bug #5049 (Resolved): Prompt for credentials when connecting to remote kepler server
- At some point in Figure 6( https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineer...
06/14/2010
- 02:57 PM Bug #5048 (In Progress): Can't clean (or do other build system operations) offline
- When I try to run "ant clean" from the sensor-view suite, I get the exception below. The module kepler-2.0.^ is not r...
- 01:39 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- (In reply to comment #13)
> (In reply to comment #12)
> > (In reply to comment #11)
> > > Sounds good. Can you poke a... - 01:12 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- (In reply to comment #12)
> (In reply to comment #11)
> > Sounds good. Can you poke around looking for any other simi... - 12:21 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- (In reply to comment #11)
> Sounds good. Can you poke around looking for any other similar problems -- e.g.
> what ha...
Also available in: Atom