Project

General

Profile

Activity

From 06/12/2010 to 07/11/2010

07/09/2010

05:22 PM Bug #5091 (Resolved): Dragging and dropping report layout items NPEs
Often when you're dragging and dropping a report item in the report designer, you get NPEs spewing on the console. Th... Derik Barseghian
05:15 PM Bug #5090 (New): Report Layout interface is confusing wrt locking and switching to old layouts
I'm unhappy with how the report layout 'lock edit mode' button works. By default, it's unlocked, and when you first c... Derik Barseghian
04:30 PM Bug #5087: Image report items aren't shown when original image path doesn't resolve
Worked w/ Ben to fix this in r25094 on 2.0 branch.
Needs to be merged into trunk.
Derik Barseghian
01:43 PM Bug #5087: Image report items aren't shown when original image path doesn't resolve
The embedded images should (and I believe used to) be decoded from their base-64 characters and made into an image fi... ben leinfelder
01:19 PM Bug #5087 (Resolved): Image report items aren't shown when original image path doesn't resolve
Image report items aren't shown in the layout viewer or instance viewer when the original image path doesn't resolve.... Derik Barseghian
03:58 PM Bug #5089 (Resolved): Replace operating system specific files with operating system specific modules.
(14) Replace operating system specific files with operating system specific modules.
Currently, as illustrated by ...
David Welker
01:30 PM Bug #5088 (Resolved): Report designer gui difficult to use with greater than about 3-4 items
Report designer becomes difficult to use for reports with greater than about 3-4 items. Since the panel has such a la... Derik Barseghian
01:15 PM Bug #5086 (New): Report instance does not show in viewer after kar open
When opening a run kar that contains a report instance, the report instance viewer does not show the pdf. If a kar co... Derik Barseghian
01:09 PM Bug #4247: Application menu items sometimes disappear on OS X
(In reply to comment #10)
> I've search for possibly offending calls to showConfirmDialog and
> showMessageDialog (t...
Derik Barseghian
01:08 PM Bug #4247: Application menu items sometimes disappear on OS X
I've search for possibly offending calls to showConfirmDialog and showMessageDialog (those that use null as first ar... Derik Barseghian
10:01 AM Bug #5085 (Resolved): add table of contents to User's Guide
The 2.0 version of the User's Guide is missing its table of contents. Add one for the 2.1 release. Thhis was notice... Matt Jones

07/08/2010

02:26 PM Bug #5084 (Resolved): Allow test releases in the same location as actual releases.
(13) Allow test releases in the same location as actual releases.
Right now, the Kepler module manager can be conf...
David Welker
11:56 AM Bug #5083: possible to save a kar that loses the report layout
This is fixed in 2.0, but needs to be merged into trunk. Derik Barseghian
11:51 AM Bug #5083: possible to save a kar that loses the report layout
I've implemented a stopgap to this bug, with the following comment, in WorkflowManager so that reporting 2.0 can depe... Derik Barseghian

07/07/2010

06:36 PM Bug #5083 (Resolved): possible to save a kar that loses the report layout
This seems like a problem with the ObjectManager.
Scenario:
User A uses Save Archive to create test.kar, it conta...
Derik Barseghian
05:25 PM Bug #5082 (Resolved): Eclipse build fails because of invalid archive
Under Windows Server 2003, I was building the devel tree as per
the instructions at
https://kepler-project.org/deve...
Christopher Brooks
05:23 PM Bug #4191: Eclipse build is slow the first time "Copying resources to the output folder"
The bug is that build is slow the first time under Eclipse.
For me on an older Windows 2003 Server machine, I have ab...
Christopher Brooks
04:18 PM Bug #4943: RC5 Installer Tracking Bug
I'm closing this tracking bug because all the blockers for this bug
and 2.0.0 are fixed.
BTW - I find it easier to u...
Christopher Brooks
10:49 AM Bug #5071: Improve the installer so that it is automated instead of requiring so many manual steps. Also, develop streamlined release process so that minor releases 2.1, 2.2, etc. can be accomplished more rapidly.
Does this mean creating an installer or using the installer?
Creating an installer:
Bug 5027: Users should be able t...
Christopher Brooks
10:45 AM Bug #5051: Semantically annotate during Save Archive a workflow with remote data set Error
Okay, it is indeed fixed in the trunk and in the release branch. I tested the release, which did not work, but having... Sean Riddle
10:11 AM Bug #5051: Semantically annotate during Save Archive a workflow with remote data set Error
I'm pretty sure this is fixed. Will test briefly against trunk and release and close if so. Sean Riddle
10:37 AM Bug #5076: Minimize the number of files downloaded from the Ptolemy repository.
As per Kepler leadership discussion, moving this to 2.X.Y. Note that
we will have Kepler devel telcon to discuss 2.1...
Christopher Brooks
10:29 AM Bug #5072: Move the R module out of Kepler/CORE entirely.
As per Kepler leadership discussion, moving this to 2.2.0. Note that
we will have Kepler devel telcon to discuss 2.1...
Christopher Brooks
10:27 AM Bug #5068: Investigate jars (why they are necessary) and upgrade whenever possible.
As per Kepler leadership discussion, moving this to 2.X.Y. Note that
we will have Kepler devel telcon to discuss 2.1...
Christopher Brooks
10:26 AM Bug #5081: A system for adding and removing GUI menus.
Documenting our current system would take about 24 hrs.
Refactoring to a different system such as RCP would take mo...
Christopher Brooks
10:25 AM Bug #5081 (New): A system for adding and removing GUI menus.
The existing system needs documentation.
Also, refactoring to use RCP would help here
Christopher Brooks
10:22 AM Bug #5067: The introduction of basic services so that module names are not referenced.
This should probably wait on the Ptolemy OSGI implementation, so I'm targeting
2.X.Y
Christopher Brooks
09:24 AM Bug #4342: apple-extensions module on windows make Eclipse build difficult
Chris Weed posted the following:
I don't know if you guys ever try to build kepler on windows with eclipse,
but it t...
Christopher Brooks

07/06/2010

06:40 PM Bug #5069: The ability to create user manuals from a wiki that is continuously updated.
I agree that making it easier for developers to update documentation is an
excellent goal. However, it is fairly dif...
Christopher Brooks
06:33 PM Bug #4324: ptII/module-info/revision.txt not being updated
It is important that Kepler developers use the most recent Ptolemy sources
so I'm marking this as targeting Kepler 2....
Christopher Brooks
06:29 PM Bug #5076: Minimize the number of files downloaded from the Ptolemy repository.
Ptolemy currently is deployable as a number of jar files that do not
include the source code.
The Ptolemy project ...
Christopher Brooks
06:02 PM Bug #5068: Investigate jars (why they are necessary) and upgrade whenever possible.
Updating the 3rd part jars is a laudable goal and a good practice, but
quite a bit of work. I'm not sure if we have ...
Christopher Brooks
05:59 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
Bug 5066 was a duplicate of this bug.
In Bug 5066, David wrote:
(2) Fix for ImageJ so that preferences are stored in ...
Christopher Brooks
05:58 PM Bug #5066: Fix for ImageJ so that preferences are stored in an area other than the installation space. This may require a change to ImageJ source code.
Duplicate of 5026, though this bug has a better title than 5026. I'll update 5026. Christopher Brooks
04:21 PM Bug #5077 (Resolved): add real inputs and outputs to sensor actor
The output port should write the latest sampled value. One or more input ports should be added to control the sensor. Daniel Crawl
02:07 PM Bug #5017: ReportLayout LSID and referral list should be maintained
Comment#15 should be fixed now in 2.0 at r25056. Needs to be merged into trunk. Derik Barseghian
02:06 PM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
Should be fixed in 2.0 now at r25056. Needs to be merged into trunk. Derik Barseghian
01:53 PM Bug #5061: Report Design Panel needs fixing wrt event listening
This is fixed in 2.0, but needs to be merged into trunk. Derik Barseghian

06/30/2010

08:51 PM Bug #5076 (New): Minimize the number of files downloaded from the Ptolemy repository.
(12) Minimize the number of files downloaded from the Ptolemy repository.
Ptolemy is a very large project that con...
David Welker
08:50 PM Bug #5075 (New): Fix the module manager so it can show docs with any name.
(11) Fix the module manager so it can show docs with any name.
Currently, the module manager only displays documen...
David Welker
08:50 PM Bug #5074 (Resolved): Fix the release process so modules can be released from Windows machines.
(10) Fix the release process so modules can be released from Windows machines.
Currently, the release process ofte...
David Welker
08:49 PM Bug #5073 (Resolved): In module manager, display the current suite name as well as a fully resolved list of modules.
(9) In module manager, display the current suite name as well as a fully resolved list of modules.
The module mana...
David Welker
08:49 PM Bug #5072 (Resolved): Move the R module out of Kepler/CORE entirely.
(8) Move the R module out of Kepler/CORE entirely. Set up the module manager to handle the R installation process whe... David Welker
08:48 PM Bug #5071 (Resolved): Improve the installer so that it is automated instead of requiring so many manual steps. Also, develop streamlined release process so that minor releases 2.1, 2.2, etc. can be accomplished more rapidly.
(7) Improve the installer so that it is automated instead of requiring so many manual steps. Also, develop streamline... David Welker
08:48 PM Bug #5070 (Resolved): Changing the "Available Modules" tab in the Module Manager to "Available Suites and Modules"
(6) Changing the "Available Modules" tab in the Module Manager to "Available Suites and Modules"
This is a minor c...
David Welker
08:47 PM Bug #5069 (New): The ability to create user manuals from a wiki that is continuously updated.
(5) The ability to create user manuals from a wiki that is continuously updated.
Currently, our user manual is pro...
David Welker
08:47 PM Bug #5068 (New): Investigate jars (why they are necessary) and upgrade whenever possible.
(4) Investigate jars (why they are necessary) and upgrade whenever possible.
It is better for us to make the lates...
David Welker
08:46 PM Bug #5067 (New): The introduction of basic services so that module names are not referenced.
(3) The introduction of basic services so that module names are not referenced.
Modules would just declare that th...
David Welker
08:45 PM Bug #5066 (Resolved): Fix for ImageJ so that preferences are stored in an area other than the installation space. This may require a change to ImageJ source code.
(2) Fix for ImageJ so that preferences are stored in an area other than the installation space. This may require a ch... David Welker
08:42 PM Bug #5065 (Resolved): In shared or administrative installations, the ability to store modules.txt and extra modules locally. This way, the module manager will work smoothly on Windows without having to run as an administrator.
(1) In shared or administrative installations, the ability to store modules.txt and extra modules locally. This way, ... David Welker
08:37 PM Bug #5064 (New): Kepler 2.1 Tracking Bug
This bug will be used to track the new features that will be implemented in Kepler 2.1. David Welker
06:17 PM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
retargeting Derik Barseghian
06:16 PM Bug #5017: ReportLayout LSID and referral list should be maintained
As of r25050 I believe I have the report LSID being properly maintained - if the user deletes, adds, rearranges, or e... Derik Barseghian
06:01 PM Bug #4524: no prompt to save a changed report
Fixed at r25050 in 2.0 branch.
I'm going to wait until further work on reporting is done before i merge 2.0 branch c...
Derik Barseghian

06/29/2010

10:41 AM Bug #4920: dynamically change toolbar buttons
This would be useful to, e.g., disable zoom in/out and new input/output port buttons in the report designer.
One met...
Daniel Crawl

06/28/2010

04:30 PM Bug #5062 (Resolved): create bugs, mockups, eng view page updates showing how authentication will work
How and where will the user be prompted for credentials for the workflow scheduler? For connecting to a remote proven... Derik Barseghian
04:24 PM Bug #5049: Prompt for credentials when connecting to remote kepler server
Add new tab in Preferences for configuring remote stores. Derik Barseghian
04:10 PM Bug #4747: import & export site layout to SensorML
Need to find tools or apps that read SensorML. Daniel Crawl
03:55 PM Bug #4741: create icons for engineering view components
Sometimes when a sensor is turned on/off, its icon color doesn't immediately change. Daniel Crawl
03:54 PM Bug #4762: create gui to control sensor from kepler
Can now turn on/off and change sampling rate by changing the sensor actor's parameters. Sometimes the icon color does... Daniel Crawl
03:51 PM Bug #5041: display recent data next to icon
Done. It makes the site layout look messy so we might want to turn it off. It's also somewhat redundant since the sam... Daniel Crawl
03:14 PM Bug #4746: ability to create a Site Layout report
Do some UI mockups this type of specialized report associated w/ the site layout. By default a Site Layout report des... Derik Barseghian
02:58 PM Bug #4744: load & save site layout to local kar file
Need to make sure the new model type has an X next to it when the KAR is in your local repo and you're not in the sen... Derik Barseghian
02:55 PM Bug #4744: load & save site layout to local kar file
If we don't add the SPAN config files or wiring diagram, not much will have to be done here. Derik Barseghian
02:53 PM Bug #4763: create gui to access datalogger program
Have we decided changes like adding and removing a sensor, things that require changing the program itself, are somet... Derik Barseghian
02:47 PM Bug #4742: create engineering view model type
Library filtering based on model is done. I want to look into making slight GUI changes to visually differentiate an ... Sean Riddle

06/25/2010

05:26 PM Bug #5061 (Resolved): Report Design Panel needs fixing wrt event listening
Mouselisteners are used for many things in reporting, and they're causing some problems. There are times when we don'... Derik Barseghian

06/21/2010

03:06 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #14)
> (In reply to comment #13)
> > (In reply to comment #12)
> > > (In reply to comment #11)
>...
debi staggs
11:19 AM Bug #5047: Rename the tagging docs tagging.pdf
This has been resolved. debi staggs
10:46 AM Bug #4751: implement "run" for site layout
The actors are highlighted with a color reflecting their status. Daniel Crawl

06/18/2010

10:45 AM Bug #4706: support provenance in master-slave 2.0
postpone it after Master-Slave 2.0.0. jianwu jianwu

06/17/2010

12:55 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
Postponing to sometime post 2.0. This does not affect the correct execution of the workflows. David Welker
12:53 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
So to sum up: Short of patching the ImageJ code, I'm not sure how to fix this. From my understanding the problem is j... Derik Barseghian
12:40 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I downloaded and tried w/ a newer ij,jar, 1.43u, but no luck, C:\Program Files\Kepler-2.0-RC5\ is still the path used... Derik Barseghian
11:54 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I'm able to replicate this on XP. It looks like IJ_Prefs.txt gets written to the project dir (C:\Program Files\Kepler... Derik Barseghian
11:41 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
This seems relevant:
http://imagej.588099.n2.nabble.com/Error-when-closing-ImageJ-td3004156.html
Derik Barseghian

06/16/2010

05:38 PM Bug #5052 (Resolved): default file open directory of Kepler 2.0
If I remember correctly, the default directory for 'File-->Open File...' menu item is getting-started directory in Ke... jianwu jianwu
05:19 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I still saw it in RC 5. Re-open it.
In my Windows 7 64 bit machine, the failure does *not* occur if
I start Kepler u...
jianwu jianwu
02:21 PM Bug #5051: Semantically annotate during Save Archive a workflow with remote data set Error
This is the trace. Note also warning at top about cloning:
trying to clone myworkflow but you can't clone this objec...
Derik Barseghian
01:48 PM Bug #5051 (Resolved): Semantically annotate during Save Archive a workflow with remote data set Error
If you search for a remote data set, drag it out to canvas, then Save Archive, and then Semantically Annotate the wor... Derik Barseghian
09:22 AM Bug #5024: Uninstaller couldn't delete the rc3 folder on windows 7
This should be fixed. David Welker
09:20 AM Bug #5008: Research Copyrights before 2.0.0 release.
Finished. David Welker

06/15/2010

05:59 PM Bug #5032: Workflow Run Manager - ability to connect to different prov stores from gui actions
I've got report layouts and instances displaying now when a workflow run manager is connected to a remote provenance ... Derik Barseghian
05:59 PM Bug #5050 (Resolved): Automatically filter workflow run manager runs based on selected workflow
In Figure 6 ( https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineering-view-plan... Derik Barseghian
05:54 PM Bug #5049 (Resolved): Prompt for credentials when connecting to remote kepler server
At some point in Figure 6( https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineer... Derik Barseghian

06/14/2010

02:57 PM Bug #5048 (In Progress): Can't clean (or do other build system operations) offline
When I try to run "ant clean" from the sensor-view suite, I get the exception below. The module kepler-2.0.^ is not r... Sean Riddle
01:39 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #13)
> (In reply to comment #12)
> > (In reply to comment #11)
> > > Sounds good. Can you poke a...
debi staggs
01:12 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #12)
> (In reply to comment #11)
> > Sounds good. Can you poke around looking for any other simi...
Derik Barseghian
12:21 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #11)
> Sounds good. Can you poke around looking for any other similar problems -- e.g.
> what ha...
debi staggs
 

Also available in: Atom