Project

General

Profile

Activity

From 06/04/2010 to 07/03/2010

06/30/2010

08:51 PM Bug #5076 (New): Minimize the number of files downloaded from the Ptolemy repository.
(12) Minimize the number of files downloaded from the Ptolemy repository.
Ptolemy is a very large project that con...
David Welker
08:50 PM Bug #5075 (New): Fix the module manager so it can show docs with any name.
(11) Fix the module manager so it can show docs with any name.
Currently, the module manager only displays documen...
David Welker
08:50 PM Bug #5074 (Resolved): Fix the release process so modules can be released from Windows machines.
(10) Fix the release process so modules can be released from Windows machines.
Currently, the release process ofte...
David Welker
08:49 PM Bug #5073 (Resolved): In module manager, display the current suite name as well as a fully resolved list of modules.
(9) In module manager, display the current suite name as well as a fully resolved list of modules.
The module mana...
David Welker
08:49 PM Bug #5072 (Resolved): Move the R module out of Kepler/CORE entirely.
(8) Move the R module out of Kepler/CORE entirely. Set up the module manager to handle the R installation process whe... David Welker
08:48 PM Bug #5071 (Resolved): Improve the installer so that it is automated instead of requiring so many manual steps. Also, develop streamlined release process so that minor releases 2.1, 2.2, etc. can be accomplished more rapidly.
(7) Improve the installer so that it is automated instead of requiring so many manual steps. Also, develop streamline... David Welker
08:48 PM Bug #5070 (Resolved): Changing the "Available Modules" tab in the Module Manager to "Available Suites and Modules"
(6) Changing the "Available Modules" tab in the Module Manager to "Available Suites and Modules"
This is a minor c...
David Welker
08:47 PM Bug #5069 (New): The ability to create user manuals from a wiki that is continuously updated.
(5) The ability to create user manuals from a wiki that is continuously updated.
Currently, our user manual is pro...
David Welker
08:47 PM Bug #5068 (New): Investigate jars (why they are necessary) and upgrade whenever possible.
(4) Investigate jars (why they are necessary) and upgrade whenever possible.
It is better for us to make the lates...
David Welker
08:46 PM Bug #5067 (New): The introduction of basic services so that module names are not referenced.
(3) The introduction of basic services so that module names are not referenced.
Modules would just declare that th...
David Welker
08:45 PM Bug #5066 (Resolved): Fix for ImageJ so that preferences are stored in an area other than the installation space. This may require a change to ImageJ source code.
(2) Fix for ImageJ so that preferences are stored in an area other than the installation space. This may require a ch... David Welker
08:42 PM Bug #5065 (Resolved): In shared or administrative installations, the ability to store modules.txt and extra modules locally. This way, the module manager will work smoothly on Windows without having to run as an administrator.
(1) In shared or administrative installations, the ability to store modules.txt and extra modules locally. This way, ... David Welker
08:37 PM Bug #5064 (New): Kepler 2.1 Tracking Bug
This bug will be used to track the new features that will be implemented in Kepler 2.1. David Welker
06:17 PM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
retargeting Derik Barseghian
06:16 PM Bug #5017: ReportLayout LSID and referral list should be maintained
As of r25050 I believe I have the report LSID being properly maintained - if the user deletes, adds, rearranges, or e... Derik Barseghian
06:01 PM Bug #4524: no prompt to save a changed report
Fixed at r25050 in 2.0 branch.
I'm going to wait until further work on reporting is done before i merge 2.0 branch c...
Derik Barseghian

06/29/2010

10:41 AM Bug #4920: dynamically change toolbar buttons
This would be useful to, e.g., disable zoom in/out and new input/output port buttons in the report designer.
One met...
Daniel Crawl

06/28/2010

04:30 PM Bug #5062 (Resolved): create bugs, mockups, eng view page updates showing how authentication will work
How and where will the user be prompted for credentials for the workflow scheduler? For connecting to a remote proven... Derik Barseghian
04:24 PM Bug #5049: Prompt for credentials when connecting to remote kepler server
Add new tab in Preferences for configuring remote stores. Derik Barseghian
04:10 PM Bug #4747: import & export site layout to SensorML
Need to find tools or apps that read SensorML. Daniel Crawl
03:55 PM Bug #4741: create icons for engineering view components
Sometimes when a sensor is turned on/off, its icon color doesn't immediately change. Daniel Crawl
03:54 PM Bug #4762: create gui to control sensor from kepler
Can now turn on/off and change sampling rate by changing the sensor actor's parameters. Sometimes the icon color does... Daniel Crawl
03:51 PM Bug #5041: display recent data next to icon
Done. It makes the site layout look messy so we might want to turn it off. It's also somewhat redundant since the sam... Daniel Crawl
03:14 PM Bug #4746: ability to create a Site Layout report
Do some UI mockups this type of specialized report associated w/ the site layout. By default a Site Layout report des... Derik Barseghian
02:58 PM Bug #4744: load & save site layout to local kar file
Need to make sure the new model type has an X next to it when the KAR is in your local repo and you're not in the sen... Derik Barseghian
02:55 PM Bug #4744: load & save site layout to local kar file
If we don't add the SPAN config files or wiring diagram, not much will have to be done here. Derik Barseghian
02:53 PM Bug #4763: create gui to access datalogger program
Have we decided changes like adding and removing a sensor, things that require changing the program itself, are somet... Derik Barseghian
02:47 PM Bug #4742: create engineering view model type
Library filtering based on model is done. I want to look into making slight GUI changes to visually differentiate an ... Sean Riddle

06/25/2010

05:26 PM Bug #5061 (Resolved): Report Design Panel needs fixing wrt event listening
Mouselisteners are used for many things in reporting, and they're causing some problems. There are times when we don'... Derik Barseghian

06/21/2010

03:06 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #14)
> (In reply to comment #13)
> > (In reply to comment #12)
> > > (In reply to comment #11)
>...
debi staggs
11:19 AM Bug #5047: Rename the tagging docs tagging.pdf
This has been resolved. debi staggs
10:46 AM Bug #4751: implement "run" for site layout
The actors are highlighted with a color reflecting their status. Daniel Crawl

06/18/2010

10:45 AM Bug #4706: support provenance in master-slave 2.0
postpone it after Master-Slave 2.0.0. jianwu jianwu

06/17/2010

12:55 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
Postponing to sometime post 2.0. This does not affect the correct execution of the workflows. David Welker
12:53 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
So to sum up: Short of patching the ImageJ code, I'm not sure how to fix this. From my understanding the problem is j... Derik Barseghian
12:40 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I downloaded and tried w/ a newer ij,jar, 1.43u, but no luck, C:\Program Files\Kepler-2.0-RC5\ is still the path used... Derik Barseghian
11:54 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I'm able to replicate this on XP. It looks like IJ_Prefs.txt gets written to the project dir (C:\Program Files\Kepler... Derik Barseghian
11:41 AM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
This seems relevant:
http://imagej.588099.n2.nabble.com/Error-when-closing-ImageJ-td3004156.html
Derik Barseghian

06/16/2010

05:38 PM Bug #5052 (Resolved): default file open directory of Kepler 2.0
If I remember correctly, the default directory for 'File-->Open File...' menu item is getting-started directory in Ke... jianwu jianwu
05:19 PM Bug #5026: Error dialog pop up in RC3 when closing the ImageJ window after workflow execution.
I still saw it in RC 5. Re-open it.
In my Windows 7 64 bit machine, the failure does *not* occur if
I start Kepler u...
jianwu jianwu
02:21 PM Bug #5051: Semantically annotate during Save Archive a workflow with remote data set Error
This is the trace. Note also warning at top about cloning:
trying to clone myworkflow but you can't clone this objec...
Derik Barseghian
01:48 PM Bug #5051 (Resolved): Semantically annotate during Save Archive a workflow with remote data set Error
If you search for a remote data set, drag it out to canvas, then Save Archive, and then Semantically Annotate the wor... Derik Barseghian
09:22 AM Bug #5024: Uninstaller couldn't delete the rc3 folder on windows 7
This should be fixed. David Welker
09:20 AM Bug #5008: Research Copyrights before 2.0.0 release.
Finished. David Welker

06/15/2010

05:59 PM Bug #5032: Workflow Run Manager - ability to connect to different prov stores from gui actions
I've got report layouts and instances displaying now when a workflow run manager is connected to a remote provenance ... Derik Barseghian
05:59 PM Bug #5050 (Resolved): Automatically filter workflow run manager runs based on selected workflow
In Figure 6 ( https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineering-view-plan... Derik Barseghian
05:54 PM Bug #5049 (Resolved): Prompt for credentials when connecting to remote kepler server
At some point in Figure 6( https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineer... Derik Barseghian

06/14/2010

02:57 PM Bug #5048 (In Progress): Can't clean (or do other build system operations) offline
When I try to run "ant clean" from the sensor-view suite, I get the exception below. The module kepler-2.0.^ is not r... Sean Riddle
01:39 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #13)
> (In reply to comment #12)
> > (In reply to comment #11)
> > > Sounds good. Can you poke a...
debi staggs
01:12 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #12)
> (In reply to comment #11)
> > Sounds good. Can you poke around looking for any other simi...
Derik Barseghian
12:21 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #11)
> Sounds good. Can you poke around looking for any other similar problems -- e.g.
> what ha...
debi staggs

06/11/2010

04:26 PM Bug #5042: create span simulator
The simulator now generates data for each sensor, and you can control the sampling parameters. Daniel Crawl
11:33 AM Bug #5047: Rename the tagging docs tagging.pdf
I don't think kepler-tagging-ui.pdf is the documentation. I think it's some early design documents. They should proba... Sean Riddle
11:29 AM Bug #5047 (Resolved): Rename the tagging docs tagging.pdf
The tagging docs (tagging-2.0 > docs) need to be named tagging.pdf instead of kepler-tagging-ui.pdf
This is so tha...
debi staggs
10:53 AM Bug #5043: Help => Modules Documentation menu not in 2.0
Fixed Now. debi staggs

06/10/2010

05:36 PM Bug #5032: Workflow Run Manager - ability to connect to different prov stores from gui actions
Making a little progress on this bug. As a test I've added a temporary jbutton to the WRM that connects to provenance... Derik Barseghian
05:19 PM Bug #5033: Workflow Run Manager - Allow multiple instances of WRM in one Kepler instance
I've made some progress on this bug, I've created a WorkflowRunManagerManager (could use a rename) to manage the now ... Derik Barseghian
03:03 PM Bug #5031: Fail to switch to other suite from module manager of Kepler-2.0-RC3
It looks like this is working in RC4 on Lei's machine under Windows Vista too. The origins of this problem remain unk... David Welker

06/09/2010

06:11 PM Bug #5031: Fail to switch to other suite from module manager of Kepler-2.0-RC3
David, I went to test this on RC4 w/ Vista but the only suite listed at the moment under Available Suites: is kepler-... Derik Barseghian
03:22 PM Bug #5042: create span simulator
I've implemented part of the simulator. You can start it by running 'ant spansim' in sensor-view/.
Yet to do:
* dat...
Daniel Crawl
01:38 PM Bug #4997: SEEK/garpModel_ImageJ.xml has an exception while opening
Closing. Workflows moved to unsupported. David Welker
01:10 PM Bug #5017: ReportLayout LSID and referral list should be maintained
Sounds good. Can you poke around looking for any other similar problems -- e.g. what happens when you have multiple c... Derik Barseghian
01:01 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #9)
> (In reply to comment #8)
> > Yes, it's not sufficient because scenarios like comment#6 are...
debi staggs
12:38 PM Bug #5017: ReportLayout LSID and referral list should be maintained
(In reply to comment #8)
> Yes, it's not sufficient because scenarios like comment#6 are still possible.
>
> I think...
debi staggs
11:33 AM Bug #5045 (In Progress): Add a menu to add and configure new remote kepler servers
Figure 6 (https://kepler-project.org/developers/incubation/kepler-engineering-view-for-reap/engineering-view-plans ) ... Derik Barseghian

06/08/2010

05:25 PM Bug #5044: Can't insert null record using Database Writer actor
Corinna reports this works for her mysql DB too. Closing. Derik Barseghian
01:40 PM Bug #5044: Can't insert null record using Database Writer actor
Should be fixed in trunk at r24764.
If token is nil, now inserting null into DB. I've (only) tested this with a loca...
Derik Barseghian
11:37 AM Bug #5043: Help => Modules Documentation menu not in 2.0
(In reply to comment #4)
> (In reply to comment #3)
> > I've retried with a fresh checkout of 2.0 and the menu item i...
debi staggs
11:06 AM Bug #5043: Help => Modules Documentation menu not in 2.0
(In reply to comment #3)
> I've retried with a fresh checkout of 2.0 and the menu item is missing. I also
> retried a...
debi staggs
10:48 AM Bug #5043: Help => Modules Documentation menu not in 2.0
I've retried with a fresh checkout of 2.0 and the menu item is missing. I also retried after deleting KeplerData and ... Derik Barseghian
10:32 AM Bug #5043: Help => Modules Documentation menu not in 2.0
I just checked rc4 and the moudles documentation menu item is available as expected in it as well. debi staggs
10:11 AM Bug #5043: Help => Modules Documentation menu not in 2.0
Derik, are you talking about release candidate 4 or are you talking about what is currently in svn in kepler/releases... debi staggs
10:57 AM Bug #5017: ReportLayout LSID and referral list should be maintained
Yes, it's not sufficient because scenarios like comment#6 are still possible.
I think the best approach is to roll t...
Derik Barseghian

06/07/2010

05:33 PM Bug #5044 (Resolved): Can't insert null record using Database Writer actor
User reports being unable to insert null record into database using Database Writer's input port -- I don't believe t... Derik Barseghian
05:20 PM Bug #5043 (Resolved): Help => Modules Documentation menu not in 2.0
Under the 2.0 branch and RC4, I don't see the Modules Documentation menu item. This menu item exists on trunk. I trie... Derik Barseghian
04:36 PM Bug #5042 (Resolved): create span simulator
Create a SPAN simulator that uses the SPAN control protocol to start/stop sensors, and change sampling rates. Additio... Daniel Crawl
04:31 PM Bug #5041 (Resolved): display recent data next to icon
Display the most recent data value and timestamp next to each sensor icon while "running" an engineering view workflow. Daniel Crawl
04:15 PM Bug #5017: ReportLayout LSID and referral list should be maintained
So, just to be sure that I am understanding you correctly -- are you saying that using the ReportLayoutKAREntryHandle... debi staggs
03:42 PM Bug #5017: ReportLayout LSID and referral list should be maintained
Hey Debi, while it may be ok to only increment the LSID whenever a report layout is saved, one of the ways a report l... Derik Barseghian
02:50 PM Bug #5017: ReportLayout LSID and referral list should be maintained
The report layout LSID is now incremented whenever the user saves a KAR file, but only if it is in the local namespac... debi staggs
03:59 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
The files had been moved in 2.0 but not trunk. I moved the ones in trunk. Derik Barseghian
01:43 PM Bug #5034: Need to generalize copying workflow demos from areas other than outreach.
Why was this closed? From what I can tell Help => Modules Documentation is still broken because the files haven't bee... Derik Barseghian
02:51 PM Bug #4981: RIO pdfs don't show up in the Component Library
Re-targeting for now, based on our discussion during the REAP meeting today. debi staggs
12:35 PM Bug #4544: Enter key in Report Designer title invokes a search
This shouldn't be that hard to fix. It actually sounds like the search field is being greedy. Can the KeyEventListene... ben leinfelder
12:29 PM Bug #4544: Enter key in Report Designer title invokes a search
No need to change anything on this bug IMO, it was filed with Importance 'minor' and targeted for 2.X.Y. Derik Barseghian
12:23 PM Bug #4544: Enter key in Report Designer title invokes a search
I have looked at this again, and following the steps you describe, I can see this in the GUI. However, I don't think... debi staggs
11:56 AM Bug #4544: Enter key in Report Designer title invokes a search
This still happens for me on trunk, on mac and windows. A way to replicate that shows in the gui:
Type sdf into the S...
Derik Barseghian
06:59 AM Bug #4544: Enter key in Report Designer title invokes a search
This is no longer happening for me. debi staggs
12:16 PM Bug #4647: Write documentation for Reporting in the style of Kepler Docs
Closing this for now, although with the disclaimer that there still may be some small changes or additions. debi staggs
09:08 AM Bug #4524: no prompt to save a changed report
Figured out what is happening here. Ptolemy > gui > Top _queryForSave method is being used instead of the ReportDes... debi staggs
08:49 AM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
Based on Deriks comments, re-targeting to wrp-2.x.y for now. debi staggs
08:18 AM Bug #4324: ptII/module-info/revision.txt not being updated
ptolemy/revisions.txt is not being automatically updated so I'm reopening this.
From the svn logs, it looks like the...
Christopher Brooks
07:09 AM Bug #4660: Clicking in a section header highlights all the text.
Fixed. debi staggs
07:08 AM Bug #4548: string tokens with newlines print the escape sequences
Re-targeting for post 2.0. debi staggs
07:06 AM Bug #4526: multi-line entries can be put into text items in reports, but they are displayed on a single line
This is desired behavior, as we do not want to assume that the user would like a new line whenever the text wraps in ... debi staggs

06/04/2010

03:49 PM Bug #4741: create icons for engineering view components
also need a different color/icon to represent sending commands to SPAN Daniel Crawl
03:45 PM Bug #5040: create views, tabs, configuration
done Daniel Crawl
 

Also available in: Atom