Activity
From 04/12/2010 to 05/11/2010
05/11/2010
- 05:01 PM Bug #4938: Reporting suite no longer works on its own
- should be fixed in trunk and 2.0.
reporting is the "new wrp" and depends on workflow-run-manager now, and the wrp s... - 10:50 AM Bug #4533: printing from the report viewer prints the workflow editor content
- retargeting to post-2/wrp
This would be part of an entire Kepler UI redesign.
save for later as open...
05/10/2010
- 11:51 PM Bug #4982: NPE when starting with no network
- Fixed.
- 04:13 PM Bug #4998: DataTurbine actor instantiation problem
- fixed in r24320 (trunk) and r24321 (2.0)
- 12:53 PM Bug #4998 (Resolved): DataTurbine actor instantiation problem
- Sometimes the DataTurbine actor gives an error during instantiation -- this will typically happen if you save a workf...
- 02:12 PM Bug #4938: Reporting suite no longer works on its own
- Thanks for the offer David, but I'm going to try to get Reporting working on its own again hopefully doing away with ...
- 02:01 PM Bug #4938: Reporting suite no longer works on its own
- Thanks for the offer David, but I'm going to try to get Reporting working on its own again hopefully doing away with ...
- 02:12 PM Bug #4896: When exporting multiple runs only 1 ROML is placed in KAR
- It seems like this may also cause problems when there are two different ROMLs in different KARs in your local reposit...
05/09/2010
- 10:18 PM Bug #4996: 2.0-RC2 demos don't work
- It looks like a version change from 2.0 to 2.0.0 is causing problems.
I removed my KeplerData directory and installed... - 09:55 PM Bug #4996 (Resolved): 2.0-RC2 demos don't work
- 10:14 PM Bug #4997 (Resolved): SEEK/garpModel_ImageJ.xml has an exception while opening
- In Kepler-2.0-RC2,
SEEK/garpModel_ImageJ.xml has an exception while opening
ptolemy.kernel.util.NameDuplication... - 09:57 PM Bug #4995: ant installer fails under Linux
- Is the "ant installer" command even supposed to work under Linux? I was under the impression that this command was in...
- 05:15 PM Bug #4995 (In Progress): ant installer fails under Linux
- In a clean Kepler 2.0 tree, "ant installer" fails under linux:
build-macapp:
[echo] jarbunder
[null... - 09:34 PM Bug #4990: Ptolemy documentation missing
- Fixed!
It turns out that the links in the ptII/doc/mainVergilPtinyKepler.htm file were
incorrect. I added some test... - 05:12 PM Bug #4003: Support for non-GUI Kepler installer.
- One workaround for this is to have IzPack use
<panel classname="FinishPanel"/>
instead of
<panel classname="Simple...
05/07/2010
- 08:15 PM Bug #4994: ant installer fails with "Invalid directory 'dir' ... outreach-2.0.0/resources"
- Until I can build an installer, I can't fix bug #4990.
- 08:14 PM Bug #4994 (Resolved): ant installer fails with "Invalid directory 'dir' ... outreach-2.0.0/resources"
- Working from the instructions at
https://kepler-project.org/developers/teams/build/building-kepler-installers
and u... - 08:03 PM Bug #4281: ant update produces message about running svn cleanup
- I was just bitten by this bug again.
The problem is that under Windows, if build-area gets updated by someone
else, t... - 06:47 PM Bug #4993 (Resolved): Kepler-2.0 cannot be built under windows because of apple-extensions
- The instructions at
https://kepler-project.org/developers/teams/build/systems/build-system/extension-build-system
f... - 06:43 PM Bug #4992 (Resolved): In a shared installation, how does the user get the demo?
- The intro screen says
"All listed demos are in the KeplerData/Kepler-2.0.Demos/getting-started which can be found ... - 06:39 PM Bug #4991 (Resolved): Kepler-2.0-RC2 fails to start for a non-admin user after admin install
- I installed Kepler as admin under Windows 2003 and the installation works
fine.
If I try to start Kepler as a non-a... - 06:21 PM Bug #4977: Can't associate multiple sets of reporting artifacts in one kar with different executions
- Changing the title of this bug and adding dependency.
To reiterate - if it were possible to make a KAR with multipl... - 06:18 PM Bug #4990 (Resolved): Ptolemy documentation missing
- The Kepler-2.0-RC2 installer does not include files like ptII/doc/expression.pdf
To see this
1) start up Kepler, ... - 06:09 PM Bug #4973: Save Archive sometimes saves more or less than it should in WRP
- Can't get this to happen anymore, closing.
- 05:59 PM Bug #4987: RC2 cannot find R pkg
- The Mac installer (https://code.kepler-project.org/code/kepler/releases/installers/Kepler-2.0-RC2-osx.jar) could not ...
- 02:32 PM Bug #4987: RC2 cannot find R pkg
- Same thing happened to me.
- 02:01 PM Bug #4987 (Resolved): RC2 cannot find R pkg
- The RC2 installer can't find the R pkg: it's looking in r-2.0 but should be r-2.0.0.
- 05:56 PM Bug #4989 (Resolved): The installer should offer to start Kepler
- The installer should offer to start Kepler upon completion so that
the user does not have to go digging for it.
See... - 05:45 PM Bug #4984: user mailing list is wrong
- Also, we should be very precise about the version.
The installer intro screen says
Kepler 2.0 RC2
but when I install... - 05:40 PM Bug #4984: user mailing list is wrong
- Also, the date in the installer is wrong, it says "April 29, 2010".
- 10:41 AM Bug #4984: user mailing list is wrong
- The intro in the installer says:
User discussion mailing list: kepler-dev@ecoinformatics.org - 10:39 AM Bug #4984 (Resolved): user mailing list is wrong
- 05:44 PM Bug #4978: Create additional 'module' property for any menu entries that are inserted by non-core modules
- The configuration system already has a mechanism to remove properties when the module that added them is no longer pr...
- 05:28 PM Bug #4988 (Resolved): Instantiating a wf as a composite that has a tag doesn't work as expected
- If I have a workflow, drag a composite onto canvas, open the composite and tag it, then close the composite, I see th...
- 05:05 PM Bug #4943: RC5 Installer Tracking Bug
- Hi Jing, I agree with you. Normally users do not use 'run as administrator' much.
- 04:59 PM Bug #4943: RC5 Installer Tracking Bug
- Yep, if I right click the icon and choose "Run as the Administrator", kepler will start. RC1 doesn't need this. I thi...
- 03:58 PM Bug #4943: RC5 Installer Tracking Bug
- Jing, I have to right click the icon and use 'Run as administrator', or start cmd using 'Run as administrator' and ex...
- 03:41 PM Bug #4943: RC5 Installer Tracking Bug
- Jianwu, can you start the kepler on windows 7. I can installed it successfully. But it can't be started.
Last time, ... - 03:19 PM Bug #4943: RC5 Installer Tracking Bug
- On window 7, kepler desktop icon us a blank page.
- 11:57 AM Bug #4943: RC5 Installer Tracking Bug
- It works when I installed it in Windows 7 64 bit. One only issue I found is that the generated desktop icon is not Ke...
- 04:53 PM Bug #4524: no prompt to save a changed report
- This dialog also comes up in at least two cases when it shouldn't:
1) don't have a report design underway
2) when cha... - 02:06 PM Bug #4985: problem with workflows using Rexpression on Windows XP
- I found two workflows can not be executed on Windows 7 64 bit: Kepler-2.0.0-Demos\demos\R\r-2.0.0\demos\R\localFile_t...
- 01:31 PM Bug #4985 (Resolved): problem with workflows using Rexpression on Windows XP
- On Windows XP workflows using RExpression don't finish execution. This happens in RC2 and wrp trunk on XP, the consol...
- 01:36 PM Bug #4986 (Resolved): Problem with property DEMODIR on Windows XP
- On Windows XP I have problems with workflows that have paths like 03-ImageDisplay.xml. I think this is an issue with ...
- 12:03 PM Bug #4938: Reporting suite no longer works on its own
- If reporting is no longer working independently, it should be converted from a suite to an ordinary module. That invo...
- 11:16 AM Bug #4938: Reporting suite no longer works on its own
- I think it would be really optimal to have Reporting work on its own when we release wrp-2.0. This would be more cons...
- 09:25 AM Bug #4938: Reporting suite no longer works on its own
- Hi Derik,
I see that you were working on this, are we intending to do take the steps you described in your last comm... - 11:37 AM Bug #4956: make sure matlab works with installed version of kepler 2.0
- works for me on 32 bit linux. closing the bug.
- 11:06 AM Bug #4956: make sure matlab works with installed version of kepler 2.0
- works for me on 32 bit mac and windows with RC2
- 11:10 AM Bug #4983: cannot run kepler.sh in RC2
- This works if kepler.sh/bat is in the current directory.
- 10:08 AM Bug #4983 (Resolved): cannot run kepler.sh in RC2
- # /Applications/Kepler-2.0-RC2/Kepler.app/Kepler/kepler.sh
Exception in thread "main" java.lang.NoClassDefFoundErro... - 09:43 AM Bug #4982 (Resolved): NPE when starting with no network
- NPE when starting with no network:
[run] Exception in thread "main" java.lang.NullPointerException
[r...
05/06/2010
- 04:33 PM Bug #4981 (In Progress): RIO pdfs don't show up in the Component Library
- If you create a workflow and a simple report, execute, export the run to a local repository, then expand the kar in t...
- 04:31 PM Bug #3976: Update Documentation for 2.0 release
- Unless anyone has any objections, I am now closing this bug.
- 03:08 PM Bug #4956: make sure matlab works with installed version of kepler 2.0
- re-assign to Jianwu
- 02:03 PM Bug #4973: Save Archive sometimes saves more or less than it should in WRP
- The issues wrt entire additional sets of run and reporting artifacts should be fixed now.
The issue of Save Archive s... - 02:02 PM Bug #4976: Importing run archive from a different namespace is broken
- fixed in r24244 (trunk) and r24246 (2.0).
- 12:10 PM Bug #4980: Tagging a run now creates two identical tags in the GUI
- Fixed in r24242 on trunk and r24243 on branch.
05/05/2010
- 05:44 PM Bug #4980 (Resolved): Tagging a run now creates two identical tags in the GUI
- Sean is able to replicate this at r24224. If you tag a run in the WRM, two gui tag labels show up instead of one.
- 12:28 PM Bug #4977: Can't associate multiple sets of reporting artifacts in one kar with different executions
- Made that change, so artifacts are being inserted, but leaving this bug open since this procedure won't work for run-...
- 12:22 PM Bug #4979: ROML has type of ReportInstance instead of ReportLayout in kar manifest
- discussed with Ben, the ReportLayout is a ReportInstance during open, so for reference, we decided the best soln was ...
- 11:05 AM Bug #4966: Make simple GUI mods for module manager
- This is done for the 2.0 release. May be revisited after that.
05/04/2010
- 07:11 PM Bug #4979 (Resolved): ROML has type of ReportInstance instead of ReportLayout in kar manifest
- E.g.:
Name: Unnamed1_ROML.xml
dependsOnModule: reporting
handler: org.kepler.kar.handlers.ReportLayoutKAREntryHa... - 05:21 PM Bug #4978 (In Progress): Create additional 'module' property for any menu entries that are inserted by non-core modules
- As of revision r24221 and r24222-3 on the branch, there's a way to avoid those errors that look like:
[run] ... - 05:00 PM Bug #4977 (Resolved): Can't associate multiple sets of reporting artifacts in one kar with different executions
- Reporting artifacts from imported runs are no longer being put into provenance since reporting attributes are no long...
- 02:13 PM Bug #4976 (Resolved): Importing run archive from a different namespace is broken
- When you import a run, the run's execId is set to the next available execId, and we attempt to increment the run's re...
- 01:38 PM Bug #4969: Exported run-kar puts a roml at root of Components tree
- fixed in r24213 (trunk) and r24214 (2.0)
- 10:34 AM Bug #4928: Clean up kepler-project.org KAR files
- I backed up the kepler database as kepler_backup_05042010 under /var/lib/pgsql/backups. Then the left actors were del...
05/03/2010
- 06:01 PM Bug #4974 (Resolved): ant run and ant force-ptolemy fail to compile an updated file
- In the devel tree, if I update a Ptolemy java file, then "ant run"
and "ant force-ptolemy" fail to compile the file.... - 05:25 PM Bug #4915: PortParameters instantiated from Outline tab cannot be deleted
- Hey Christopher, this bug was specific to the (new-ish) Outline tab, not the Components tab. Before it was made non-d...
- 04:17 PM Bug #4915: PortParameters instantiated from Outline tab cannot be deleted
- The executive summary is that I can't reproduce this bug before the change to ParameterPort. Is the change to Parame...
- 05:06 PM Bug #4970: Make non-instantiable items in local KARs not draggable
- Fixed in r24155-6 and r24157 on the branch.
Objects that are cached are given a cache category, which is an enumerat... - 01:14 PM Bug #4970 (Resolved): Make non-instantiable items in local KARs not draggable
- Items in KARs that are not instantiable should not be draggable. The tree model needs to be constructed with these Na...
- 04:40 PM Bug #4973 (Resolved): Save Archive sometimes saves more or less than it should in WRP
- When running the WRP suite, if you create a workflow and a report design(roml), File => Save Archive should save the ...
- 01:18 PM Bug #4972 (Resolved): Write documentation for workflow-run-manager module
- Debi will try to fwd Sean and I documentation outlines to fill in.
- 01:15 PM Bug #4971 (Resolved): Write documentation for tagging module
- n/t
- 01:14 PM Bug #4928: Clean up kepler-project.org KAR files
- I tried to open those actors downloaded from the repository on Kepler 1.0. But none of them succeeded. I talked with ...
04/30/2010
- 05:33 PM Bug #4968: Could not validate generated KAR file for uploading to repository
- Close it. If Sean finds an issue on his testing, this bug will be reopened.
- 04:31 PM Bug #4968: Could not validate generated KAR file for uploading to repository
- During the generating the children elements of mainAttribute, kepler iterated a Set object to get names and values. H...
- 02:13 PM Bug #4968: Could not validate generated KAR file for uploading to repository
- The xml looks like:
<mainAttributes>
<KAR-Version>2.0</KAR-Version>
<Manifest-Version>1.4.2</Manifest-Version>
<mo... - 02:05 PM Bug #4968 (Resolved): Could not validate generated KAR file for uploading to repository
- I created a KAR file by doing the following:
1) Instantiate:
* An SDF director (iterations=1)
* A StringCons... - 04:56 PM Bug #4969: Exported run-kar puts a roml at root of Components tree
- Also the RIO.1.xml and RIO.1.pdf don't show up in the gui inside the KAR. This is a regression.
Also I'm not sure why... - 02:12 PM Bug #4969 (Resolved): Exported run-kar puts a roml at root of Components tree
- If you create a workflow and a report, run, export the run, you end up with a roml at the root level of your Componen...
- 02:47 PM Bug #4967: Disallow dragging romls, workflowRuns, etc onto canvas
- Hey Sean, you're right, the run in a remote kar isn't draggable. The bug happens for me for run-kars saved in a local...
- 02:24 PM Bug #4967: Disallow dragging romls, workflowRuns, etc onto canvas
- I'm at the trunk of the wrp suite, and I can't reproduce this. I did a search for "run2-mclaughlin" on the keplerdev ...
- 01:51 PM Bug #4967 (Resolved): Disallow dragging romls, workflowRuns, etc onto canvas
- You can currently try to drag these items out to canvas, resulting in an error. I thought these were _notDraggable at...
- 01:46 PM Bug #4957: Tags are not visible under Java 1.6
- Fixed in r24151 and in r24152 in the branch.
- 09:25 AM Bug #4928: Clean up kepler-project.org KAR files
- Their names are listed for these KAR files because they were in the documentation of the uploaded kar. It may be tha...
- 09:13 AM Bug #4928: Clean up kepler-project.org KAR files
- The files that have "jie liu", "edward a lee" and "Yuhong Xiong" are likely
duplicated file from the ptII repository.... - 08:47 AM Bug #4910: Test module installation system
- Is the module installation system tested when I run "ant test" and as part
of the nightly build? - 08:16 AM Bug #4910: Test module installation system
- Module system testing confirms that it is working well, and in the process of testing we also decided to make a few s...
- 08:35 AM Bug #4966: Make simple GUI mods for module manager
- These changes have been made, and I am closing this bug for now.
- 08:34 AM Bug #4966 (Resolved): Make simple GUI mods for module manager
- Make the following modifications to the GUI of the module manager as discussed with Matt, David, and Chad.
1.) Hid...
04/29/2010
- 09:21 PM Bug #4915: PortParameters instantiated from Outline tab cannot be deleted
- Added the "_notDraggable" parameter to the ParameterPort class constructor so PTree will not allow you to drag it to ...
- 06:23 PM Bug #4965: Create and use configuration parameter for writing run-kars
- fixed in r24099 and r24100
- 05:33 PM Bug #4965 (Resolved): Create and use configuration parameter for writing run-kars
- Let user enable the writing of resultant run-kar files into KeplerData/workflow-runs/ by changing a configuration par...
- 06:16 PM Bug #4928: Clean up kepler-project.org KAR files
- wrote a program to delete the kar files except the following ones. I am waiting people's response.
Authentication zh... - 05:29 PM Bug #4964: Provenance turns off for unsupported director, but doesn't send toggle event
- fixed now, thanks dan.
- 12:23 PM Bug #4964 (Resolved): Provenance turns off for unsupported director, but doesn't send toggle event
- If you open a model with an unsupported director in wrp, like 03-LotkaVolterra, provenance auto disables because the ...
- 04:50 PM Bug #4910: Test module installation system
- Module Manager is now working with http. Tested the switching between suites and it seems to be working well. Need ...
- 04:30 PM Bug #4956: make sure matlab works with installed version of kepler 2.0
- I made a wiki page (https://kepler-project.org/developers/teams/build/matlab-lib-build-instructions-in-kepler-for-mat...
- 02:35 PM Bug #4956: make sure matlab works with installed version of kepler 2.0
- Dan and I updated the ptmatlab.cc in ptolemy module, created the libs for Mac (32 and 64 bit), Windows (32 and 64 bit...
04/28/2010
- 05:25 PM Bug #4928: Clean up kepler-project.org KAR files
- I saw several actors are in modules that are not in Kepler 2.0 release, such as Griddles* ones are in https://code.ke...
- 05:03 PM Bug #4928: Clean up kepler-project.org KAR files
- Most of these seem like variants on existing actors. You should check if they were simply uploaded for testing purpo...
- 04:37 PM Bug #4928: Clean up kepler-project.org KAR files
- After compared, those actors are not found on the kepler local library:
Authentication
kar.454.1
actor.454.1
BlastO... - 03:40 PM Bug #4960: NPE from TableSorter when repeatedly executing a small workflow in WRP
- should be fixed in r24037 (trunk) and r24038 (2.0).
I haven't seen the error since, but leaving open for Dan to test ... - 01:26 PM Bug #4943: RC5 Installer Tracking Bug
- changing title to rc2
- 01:25 PM Bug #4681: Check all file properties before release
- updated file props for trunk and 2.0. if this is done in the future, do not update keywords for any jar files. this...
04/27/2010
- 03:34 PM Bug #4928: Clean up kepler-project.org KAR files
- Thanks Jing. Yeah, just go ahead and delete any actor that is in the local repository and the remote repository unle...
- 03:23 PM Bug #4928: Clean up kepler-project.org KAR files
- I went to the kepler repository and did a "Browse all components" action. The website showed 373 components (on 37 pa...
- 03:12 PM Bug #4075: Rework Section 6
- Accepted changes, re-edited. looks good.
- 03:07 PM Bug #4956: make sure matlab works with installed version of kepler 2.0
- Yeah, I'll wait for your changes. Let me know as soon as you get it working.
- 03:00 PM Bug #4956: make sure matlab works with installed version of kepler 2.0
- Daniel and I are updating ptmatlab.cc to make it work with Mac 64 bit. It will be done in one or two days. We will te...
- 03:03 PM Bug #4936: Preferences for searching remote repositories are not maintained across runs
- Value is now written to the configuration.
- 02:00 PM Bug #4958: Tags colors are all white by default under Windows XP with Java 1.5
- Fixed in r23994-95.
- 12:16 PM Bug #4960 (Resolved): NPE from TableSorter when repeatedly executing a small workflow in WRP
- If you're in the WRP suite and repeatedly execute a workflow, this NPE sometimes occurs with each execution. WRM does...
04/26/2010
- 05:26 PM Bug #4944: Unsaved report warning happens once per window
- fixed in r23982.
- 05:08 PM Bug #4959: Reporting call to getDefaultProvenaceRecorder occasionally gets an NPE
- fixed in r23981.
- 12:43 PM Bug #4959: Reporting call to getDefaultProvenaceRecorder occasionally gets an NPE
- Re: new lsid added and referral generated when it shouldn't, I think I was wrong, this is happening when a new namesp...
- 12:16 PM Bug #4959: Reporting call to getDefaultProvenaceRecorder occasionally gets an NPE
- Now I think this happens when you make a change to certain workflows and an entirely new lsid is gotten, and the old ...
- 11:47 AM Bug #4959 (Resolved): Reporting call to getDefaultProvenaceRecorder occasionally gets an NPE
- Sometimes when you execute a workflow in WRP, you'll get an NPE from Reporting when it calls ProvenaceRecorder.getDef...
- 03:37 PM Bug #4893: WRP Kepler Frame vertically fills entire screen
- With 13 items I don't have any problems.
- 11:08 AM Bug #4893: WRP Kepler Frame vertically fills entire screen
- The designersplitpane shouldn't affect anything hopefully, but it is important not to make the size of the layoutpane...
- 02:21 PM Bug #4955: Error trying to instantiate workflow from Outline tab
- I've hidden the root node in the outline tree to prevent the possibility of this error from occurring.
- 01:46 PM Bug #4517: Verify that the search capabilities work
- close the bug.
- 01:45 PM Bug #4953: Remote Components category sticks around sometimes
- Fixed.
04/23/2010
- 03:22 PM Bug #4958: Tags colors are all white by default under Windows XP with Java 1.5
- It is a wild shot, but perhaps all white tags could have a similar cause as the cause of bug #3810?
- 03:18 PM Bug #4958 (Resolved): Tags colors are all white by default under Windows XP with Java 1.5
- On Windows XP w/ Java 1.5, all the tags are white by default. I see that if I go into the tag manager, I can change c...
- 03:13 PM Bug #4957 (Resolved): Tags are not visible under Java 1.6
- Tags are clearly laid out, as other components are moved by them, but they are not themselves visible on Java 1.6, at...
- 02:42 PM Bug #4524: no prompt to save a changed report
- i don't think that's a "fix" for this issue.
If I've been making report layout changes and then i close Kepler, I am ... - 02:32 PM Bug #3801: open dialog, common places pane has white box instead of text
- merged the 8 files in comment#12 into 2.0, so moving this bug back to 2.X.Y target.
The first part of comment#12 re: ... - 01:22 PM Bug #3801: open dialog, common places pane has white box instead of text
- It looks like the files in comment#12 still need to be merged into 2.0. I'll do this later this afternoon.
- 09:43 AM Bug #4956 (Resolved): make sure matlab works with installed version of kepler 2.0
- need to get matlab demo workflows working.
- 06:55 AM Bug #4082: New user guide section on modules/module manager
- Added screen shots to chapter 12.
04/22/2010
- 04:12 PM Bug #4893: WRP Kepler Frame vertically fills entire screen
- fixed in r23874.
- 02:48 PM Bug #4893: WRP Kepler Frame vertically fills entire screen
- It looks like simply changing ReportDesignerPanel's:
designersplitpane.setMinimumSize(new Dimension(800, 900));
d... - 01:34 PM Bug #4893: WRP Kepler Frame vertically fills entire screen
- doesn't the Report Designed have a HUGE canvas in a scrollpane. is it possible that is affecting vertical window sizing?
- 01:25 PM Bug #4893: WRP Kepler Frame vertically fills entire screen
- I've got a proper XP box up now, and I've verified this bug happens under WRP on XP. My screen resolution is 1280 x 1...
- 02:18 PM Bug #4953: Remote Components category sticks around sometimes
- This is still happening for me in wrp (on my mac launched from eclipse). Same procedure, configure to search kepler-d...
- 02:01 PM Bug #4953: Remote Components category sticks around sometimes
- Not sure why this stopped happening, but I don't see it anymore. If anybody gets this, please re-open.
04/21/2010
- 05:34 PM Bug #4955 (Resolved): Error trying to instantiate workflow from Outline tab
- If you try to drag the root node in the Outline tab out to canvas, you get an exception:
com.microstar.xml.XmlExce... - 03:16 PM Bug #4765: semantic annotation doesn't appear until you click on workflow
- Fixed in r23852
- 01:45 PM Bug #4952: Error recording workflow structure on workflow after deleting run
- Fixed in r23833.
- 11:41 AM Bug #4954: Duration value on imported runs is incorrect
- fixed in r23829.
04/20/2010
- 06:06 PM Bug #4954 (Resolved): Duration value on imported runs is incorrect
- If you export a run, then import it, the end_time for the run inserted into provenance is wrong, and hence so is the ...
- 05:51 PM Bug #4953 (In Progress): Remote Components category sticks around sometimes
- If I search KeplerDevRepository for "run2", I currently get back one result: run2-mclaughlin_par,kar, inside the new ...
- 04:58 PM Bug #4942: KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- After changing the schema base on comment 9, the invalid error has gone.
- 02:03 PM Bug #4942: KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- Here is an email from Aaron:
Hi Jing, I was thinking about this a bit and I think option 1 is the way to go. The KA... - 12:07 PM Bug #4942: KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- Sean: yes it will support new attributes too:
Ben, Aaron and I discussed the possibility to add some arbitrary eleme... - 12:01 PM Bug #4942: KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- Will this support the addition of more attributes in the future?
- 11:56 AM Bug #4942: KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- We will use a ordered key list (elements name) to get the value from the map. Then build the xml base on the element ...
- 04:25 PM Bug #4941: Data search causes menus to disappear on the mac
- Ok, I got this fixed. The key was to get the graphTableau from the ModelDirectory, from which you can then get the F...
- 01:59 PM Bug #4941: Data search causes menus to disappear on the mac
- This is indeed a problem with the JDialog not having a parent. I am working on a solution to get the parent from the...
04/19/2010
- 05:40 PM Bug #4357: Workflow Run Manager does not mark last failed execution red
- Can't get this to occur anymore, closing.
- 05:38 PM Bug #4231: Workflow Run Manager - failed runs should be highlighted red
- Can't get this occur since bug#4230 fixed. Please reopen if you find a way to get a run to fail and the WRM doesn't h...
- 05:28 PM Bug #4952 (Resolved): Error recording workflow structure on workflow after deleting run
- If create a workflow, run it, delete the run, then try to run the workflow again, you'll currently get an error (belo...
- 04:42 PM Bug #4671: cannot export workflow runs when workflow has actors with <> in the names
- This is fixed at r23778. I've restricted the gui to not allow < in the name of a kar, or in the workflow rename dialo...
- 01:31 PM Bug #4524: no prompt to save a changed report
- We solved this by adding the 'lock report' feature.
- 01:16 PM Bug #4161: Develop kepler workflow execution engine
- closing the bug.
- 01:15 PM Bug #4161: Develop kepler workflow execution engine
- so far the engine works. I am closing the bug.
- 12:33 PM Bug #4944 (Resolved): Unsaved report warning happens once per window
- The new warning dialog 'this layout is not locked or saved' happens once per window, including windows that have been...
- 11:44 AM Bug #4942: KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- I dug code a little bit and found here is the code to generate the elements of karEntryAttribute:
Attributes atts = ... - 11:39 AM Bug #4943 (Resolved): RC5 Installer Tracking Bug
- Please have all RC1 installer bugs block this bug.
- 11:31 AM Bug #4938: Reporting suite no longer works on its own
- Ah right, ReportingListener is in wrp because it uses ExportRunsToKar, which needs to be in either wrp or workflow-ru...
04/16/2010
- 06:55 PM Bug #4938: Reporting suite no longer works on its own
- I started looking into this. It looks like reporting's Initialize class should have an updateFrameComponents that's t...
- 04:55 PM Bug #4942: KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- hrrm, this is a good point that wrp will add more elements there. I think the wrp will release soon. I don't want to ...
- 04:39 PM Bug #4942: KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- Also - for WRP we are going to be adding more children to <karEntryAttributes> - ideally we'd like to add any element...
- 04:34 PM Bug #4942: KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- whichever is less of a headache to change. we are in charge of both of them, so you might as well make it easy for yo...
- 12:36 PM Bug #4942: KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- I dug around and found the xml instance is:
<karEntryAttributes>
<Name>
tpc09-plant-dynamics-woody_ROML.xml
</Na... - 12:25 PM Bug #4942 (Resolved): KarXmlGenerator generated a invalid kar xml if KarEntry has dependsOnModule element
- When i tried to upload the tpc09-plant-dynamics-woody.kar to a remote server, kepler gets the error:
org.xml.sax.SA... - 04:11 PM Bug #4910: Test module installation system
- Accidentally closed this bug, please disregard the last comment as it was intended for a bug # 4923.
- 04:04 PM Bug #4910: Test module installation system
- I have implemented this solution now. A user can 'lock' the report layout if they haven't run or saved yet, so that ...
- 04:07 PM Bug #4923: 'Lock' the report layout so that if you switch to another run in the run manager, it doesn't lose the layout that is currently being edited.
- The lock report feature is now in and working. Also added a warning if they click on a row in the workflow run manag...
- 04:03 PM Bug #4671: cannot export workflow runs when workflow has actors with <> in the names
- Christopher checked in part of the fix in r57600 and r57601, and updated kepler to trunk and 2.0 branch to use these ...
- 03:51 PM Bug #4868: Update R paths in documentation and demos
- nope, I don't think they should be moved at this point. Lets just leave it.
- 03:47 PM Bug #4940: User is never notified of incorrect login
- This appears to be a bug in ecogrid, not Kepler. Closing this in kepler, but it should be looked at in ecogrid.
- 02:12 PM Bug #4940: User is never notified of incorrect login
- This actually does not fail. It just takes a ridiculous amount of time to return the <unauth_login> message from the...
- 11:32 AM Bug #4940 (Resolved): User is never notified of incorrect login
- When you do a data search and login, if you put an incorrect username or password, then do a search, Kepler never tel...
- 02:15 PM Bug #4075: Rework Section 6
- Chad you may want to peak at the comments, but I'm done on this one.
- 02:08 PM Bug #4080: Rework Section 11
- OK this section looks pretty good now. closing
- 02:06 PM Bug #4941: Data search causes menus to disappear on the mac
- Hey Chad,
This sounds like bug#4247. Is null being passed in as first param to a showConfirmDialog or a showMessageDi... - 02:02 PM Bug #4941: Data search causes menus to disappear on the mac
- This seems to only happen when the authentication dialog appears. If the auth dialog does not appear, the menus are ...
- 12:09 PM Bug #4941 (Resolved): Data search causes menus to disappear on the mac
- If you do a data search on the mac, all of the menus in the menu bar disappear and never return. To recreate, click ...
- 11:35 AM Bug #4798: Create parser for KAR XML specification
- Sean and Jing have verified that this is now working.
- 11:35 AM Bug #2493: actor repository tracking bug
- All dependencies are done. closing.
- 11:34 AM Bug #4462: Component search in remote repositories not working
- Sean says this is completed. Closing. Reopen if problems are found.
- 09:59 AM Bug #4874: Modify existing KARFile schema for use with KAR File Parser
- I believe this is done in that it largely duplicates this bug:
http://bugzilla.ecoinformatics.org/show_bug.cgi?id=4798
04/15/2010
- 05:33 PM Bug #4798: Create parser for KAR XML specification
- Just enabled the schema validation on both the component search result and the generated kar xml by kepler.
In oder ... - 02:51 PM Bug #4672: Workflow title isn't refreshed during run export workflow rename
- Closing this. You can get into some confusing territory with name tracking if you follow the scenario in comment#1, e...
- 02:44 PM Bug #4230: problem associating errors with particular execution
- Fixed.
- 02:27 PM Bug #4931: 'Refresh (using current layout)' button gives error when Provenance is off
- fixed in r23722. refresh button now disables/enables with provenance enable/disable.
- 01:36 PM Bug #4938: Reporting suite no longer works on its own
- I have been working out of only wrp for quite some time now. I don't think that reporting is meant to run on it's ow...
- 01:19 PM Bug #4938 (Resolved): Reporting suite no longer works on its own
- If you ant change-to -Dsuite=reporting, the View drop-down doesn't show up, so you can't use Reporting. This used to ...
- 01:11 PM Bug #4924: Tagging a run when provenance is off gives errors
- fixed in r23719. context now switches to workflow when provenance is disabled.
- 11:41 AM Bug #4073: Rework Section 4
- Finished as of r1235.
- 11:27 AM Bug #4899: Installer Bugs
- All of these bugs have been fixed. Will open new bugs for any new problems.
- 11:22 AM Bug #4932: Demo workflows from modules are not being copied into KeplerData
- Should be fixed in r23704.
04/14/2010
- 06:11 PM Bug #4671: cannot export workflow runs when workflow has actors with <> in the names
- I've written part of a patch for this issue and am discussing it with Christopher.
- 05:38 PM Bug #4927: Don't allow export, upload, delete of executing run in WRM
- fixed in r23700
- 05:25 PM Bug #4915: PortParameters instantiated from Outline tab cannot be deleted
- Well, having trouble figuring this one out. I went through and tested all the other parameters included in the CoreA...
- 04:02 PM Bug #4912: File => New Workflow => FSM Model and Modal Model don't work
- Fixed in r23688
- 11:46 AM Bug #4899: Installer Bugs
- 9 is now fixed. only 20 remains.
04/13/2010
- 05:47 PM Bug #4790: cmd-click in wrp does not create relation
- Fixed in r23657.
- 04:22 PM Bug #4912: File => New Workflow => FSM Model and Modal Model don't work
- This occurs when using the wrp suite since the tagging module overrides BasicGraphController and gets a class cast ex...
- 04:18 PM Bug #4893: WRP Kepler Frame vertically fills entire screen
- Hey Derik - since you think this may be related to the WRM sizing, would you mind taking a look at it ?
- 04:12 PM Bug #4648: Create classes to find and display any available documentation for installed modules or suites.
- This bug is now complete. When a developer publishes a suite, they just have to place a file that is named with the ...
- 04:07 PM Bug #3976: Update Documentation for 2.0 release
- There are still some screen shots needed for the module manager chapter. Perhaps a good time to do those screen shots...
- 03:53 PM Bug #3976: Update Documentation for 2.0 release
- Does everyone think we can close this bug now ?
- 12:32 PM Bug #4937: Workflow tags showing as deletable in Tagging when clicking on Run
- Fixed in r23653 (r23654 in branch).
04/12/2010
- 05:56 PM Bug #4767: error instantiating actor with port types from KAR
- A small patch to the Ptolemy class TypeAttribute has solved this particular bug, but there is still a deeper problem ...
- 02:18 PM Bug #4899: Installer Bugs
- 20) add all directories to .app for mac installer
- 01:16 PM Bug #4925: Components search occasionally shows different results
- I was unable to reproduce this bug. If you only search for "sd" then you get bothe the SDF Director and the Wmsd Act...
- 01:07 PM Bug #4075: Rework Section 6
- I've finished going through this section, there are a few comments still that may need to be worked out.
- 01:02 PM Bug #4924: Tagging a run when provenance is off gives errors
- Tagging should probably implement ProvenanceEnabledListener to disable the ability to tag a run when provenance has b...
- 12:52 PM Bug #4937 (Resolved): Workflow tags showing as deletable in Tagging when clicking on Run
- If you click on a row in the WRM, the tags for the workflow and the run are shown in the Tagging UI. The workflow tag...
- 11:20 AM Bug #4929: cannot add composite actor to canvas
- I believe this was fixed when bug#4916 was fixed, with r23572 (2.0) and 23571 (trunk). It's working for me on trunk a...
Also available in: Atom