Activity
From 01/18/2011 to 02/16/2011
02/16/2011
- 03:49 PM Bug #4746: ability to create a Site Layout report
- Dan and I just brainstormed on this. A few possible solutions:
1) On the original idea of using Reporting, a few obst...
02/15/2011
- 10:32 PM Bug #5309: 2.2.0rc1 - Preferences and Components Search (configuration) issue
- I figured out the source of this problem. It isn't actually in 2.0.0rc1 itself, but instead in the installer since a ...
- 01:34 PM Bug #5309 (Resolved): 2.2.0rc1 - Preferences and Components Search (configuration) issue
- I've given the mac installer a try and I've run into the configuration file issue - my ~/KeplerData/repository/config...
- 06:39 PM Bug #5169: select more than one remote repository
- You can select multiple remote repositories for search, but not save, and this seems fine, I don't think we should pr...
- 06:32 PM Bug #4745: load & save site layout to metacat
- Saving a Site Layout to a kar works. Uploading and then downloading this kar from the kepler repository works as expe...
- 05:51 PM Bug #4744: load & save site layout to local kar file
- Re: comment#3, kars contain a module dependency list now, so the broken icon etc is taken care of.
And opening a kar... - 02:57 PM Bug #5312 (Resolved): updating windowsXP installed 2.0.0 straight to 2.2.0 renders Kepler unable to start
- On Windows XP, I had a Kepler-2.0 installed version. Using the module manager, I updated to kepler-2.2.0, skipping ke...
- 02:35 PM Bug #5311: 2.2.0rc1 - remote data sources don't work
- Likely related, on linux I just did:
cd kepler.modules/build-area/; rm -rf ~/KeplerData; ant clean-all;
started 2.2.0... - 01:56 PM Bug #5311 (Resolved): 2.2.0rc1 - remote data sources don't work
- In 2.2.0rc1 installed from the installer, remote data sources don't work.
I discovered this when trying to open Pyt... - 01:36 PM Bug #5310 (Resolved): 2.2.0rc1 - Documentation link problems
- Some issues with Help->Documentation in 2.2.0rc1:
* None of the Local Copy links to documentation (at Help->Kepler ...
02/14/2011
- 05:56 PM Bug #5296: Workflow Run Manager - multiple window, remote store gui refresh issue
- fixed at r27129
- 02:45 PM Bug #5247: Allow user to set memory allocated to Kepler from within Kepler
- Memory.xml will currently be written in KeplerData when appropriate. (i.e. in installations, when use.keplerdata is p...
- 02:43 PM Bug #5129: adding and removing configuration properties could be made easier
- This enhancement needs to accommodate not just addition, but changes and deletions as well. All that has been impleme...
- 02:31 PM Bug #5307 (New): Report designer - fix drag and drop outline sizes
- When you drag report items around, from the left out to the design, or rearranging instantiated items, the outline si...
- 02:27 PM Bug #5289: Change report instance margins from transparent to white
- Changing title and re-opening as an ER for the margins.
- 02:24 PM Bug #5306 (New): Report designer - make dynamic report item label textfields smaller
- If the 4 textfields on dynamic report items were slightly smaller, it'd be more apparent that they're textfields.
- 02:20 PM Bug #5305 (New): Report designer - make north and south dynamic item labels left justified
- In the report designer, the north and south labels on a dynamic report item are centered, which does not match how th...
- 02:16 PM Bug #5304 (New): Report designer - make "+ Get Image..." button much smaller
- On the report designer, when you drag out an Image static item, the "+ Get Image..." button on the item takes up the ...
- 01:45 PM Bug #5208: Setting sensor sampling rate <1 causes errors
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5202: update existing site layout with span changes
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5170: uploading a workflow requires a refresh
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5041: display recent data next to icon
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4745: load & save site layout to metacat
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5220: Create data chunks having same metadata info for a time interval
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5207: Sensor changes color in response to configuring the actor even if no changes made
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5206: Importing or opening a sensor site doesn't open into the sensor site view
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5205: Sensor site components not yet in tree
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5042: create span simulator
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5028: dataturbine overwrites recent data when frequently detaching
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5223: Store the last timestamp of data store for a sensor to the local database
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5164: Don't show Workflow Run Manager and tag workflow drop-down list on Schedule tab of Workflow Scheduler view
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5016: mirror dataturbine via command line
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4755: update workflow run manager and reporting to display runs of sensor workflows
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5287: Remove the override of ActorMetadataKAREntryHandler
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5172: Exceptions are sometimes thrown during sensor workflow run
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5171: link workflow in components tree to workflow in scheduler view
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5050: Automatically filter workflow run manager runs based on selected workflow
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5040: create views, tabs, configuration
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5116: add lat/lon to sensor metadata and use during import
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5033: Workflow Run Manager - Allow multiple instances of WRM in one Kepler instance
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4921: find reports for sensor in site layout
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4752: create a sensor plots gui
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4744: load & save site layout to local kar file
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5236: The list on the left panel of the scheduler should only show WF objects that can be scheduled.
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5216: Retrieve the timestamps for all the metadata changes that occurred since a previous time
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5133: Authentication and authorization of GPP server
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4760: software to transfer sensor data from SPAN to DT
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5303: The workflow which archive sensor data into metacat can upload data even no new data was generated
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5214: Retrieve the last timestamp for which a sensor's data was stored in metacat
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5032: Workflow Run Manager - ability to connect to different prov stores from gui actions
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4758: search for site components in kepler's data tab
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4757: transfer sensor data from dataturbine to metacat
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4747: import & export site layout to SensorML
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4756: allow saving of sensor workflow output
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4754: update metacat workflow execution scheduler
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4748: create google earth kml from component coordinates
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5213: Query dataturbine server to retrieve the sensors
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5169: select more than one remote repository
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5132: Connecting Workflow Run Manager to remote KAR store should prompt for credentials
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4759: install dataturbine on gumstix
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4743: create gui to edit documentation metadata for component
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5235: Scheduler GUI can schedule any wf (even local ones).
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5130: Need a login and logout interface for authenticating a user
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4762: create gui to control sensor from kepler
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4750: create wiring table gui
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5261: Get an error when execute the dataturbineToMetacat workflow in the second time
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5251: using File->Open MoML... always opens model into Sensor Site view
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4763: create gui to access datalogger program
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4742: create engineering view model type
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5286: Remove the override of EntityTreeModel
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5274: Trying to schedule workflow with report layout puts up prompt about no report layout
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5217: Retrieve the metadata of a sensor at a specific timestamp
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4920: dynamically change toolbar buttons
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5045: Add a menu to add and configure new remote kepler servers
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4773: Data processing on the GPP
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4753: create gui for scheduled execution of sensor workflows on server
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4749: run google earth within kepler gui
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5218: Create sensorML string
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5077: add real inputs and outputs to sensor actor
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4761: install and configure SPAN software on gumstix
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4751: implement "run" for site layout
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5275: Executing sensor-view workflow records provenance
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5253: SpanToDT timestamp bug
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5221: Create EML string
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5062: create bugs, mockups, eng view page updates showing how authentication will work
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4741: create icons for engineering view components
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5252: Plotting bugs
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5226: User should be warned to design a report if there isn't a report when scheduling
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5222: Store data set file and associated EML file into metacat
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5210: Focus stolen from user trying to drag components around during execution
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5201: track changes on span server
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5131: Authentication and authorization of Scheduler server
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #5049: Prompt for credentials when connecting to remote kepler server
- changing bugs from REAP to Kepler product
- 01:45 PM Bug #4746: ability to create a Site Layout report
- changing bugs from REAP to Kepler product
- 12:49 PM Bug #5301: clicking on Image item Scale Property Value sometimes gives ArrayIndexOutOfBoundException
- fixed at r27113. just don't attempt to access index that's out of bounds. This works fine, but I've included a note i...
- 12:10 PM Bug #5301: clicking on Image item Scale Property Value sometimes gives ArrayIndexOutOfBoundException
- Ok, I've finally figured out a way to reliably replicate this bug. This bug can occur for any report design item with...
02/11/2011
- 05:12 PM Bug #5303 (Resolved): The workflow which archive sensor data into metacat can upload data even no new data was generated
- I used sensor stimulator and span to generate some data into a Dataturbine server.
Then i terminated the sensor stim... - 05:01 PM Bug #5218: Create sensorML string
- We can create valid sensorML document and metacat can accept it.
The sensorML looks like:
<sml:SensorML
xmlns:sml="... - 03:04 PM Bug #5302: module_dependencies column defined too short
- some dbms support an unlimited length, indexed type for strings (such as 'text' type in postgres) that is a lot more ...
- 09:01 AM Bug #5302: module_dependencies column defined too short
- I'd recommend not specifying the length for the VARCHAR - then it will use the maximum. Just omit the (500) or (1000)...
- 12:36 PM Bug #5293: Deleting a report item scrolls you to top of design
- I've used this more after the fix I made and it seems fine.
- 12:30 PM Bug #5083: possible to save a kar that loses the report layout
- Yeah, seems fixed, haven't gotten this to recur, and I just tested again. Closing.
- 10:34 AM Bug #5252: Plotting bugs
- This can either be closed or can be held open to try and improve the port dragging behavior (maybe using a naming con...
- 10:29 AM Bug #4752: create a sensor plots gui
- (In reply to comment #2)
> Thanks for the good screencast. I also played around with it and have some
> comments:
>
...
02/10/2011
- 12:50 PM Bug #5302 (Resolved): module_dependencies column defined too short
- The v8 schema has the module_dependencies varchar column defined at 255 characters, but this is too small. This isn't...
02/09/2011
- 05:31 PM Bug #5301 (Resolved): clicking on Image item Scale Property Value sometimes gives ArrayIndexOutOfBoundException
- Clicking on Image item Scale Property Value sometimes gives ArrayIndexOutOfBoundException, seems to happen after chan...
- 04:14 PM Bug #4548: string tokens with newlines print the escape sequences
- fixed at r27068.
- 12:25 PM Bug #5299 (New): can't drag using report designer item icons
- You can't drag an item from its icon, and this is the first place I think a user will try, especially since it's the ...
- 12:16 PM Bug #5298 (New): rendered west and east dynamic item label problems
- Some problems with using west and east labels on a dynamic report item:
1) the west and east label text wraps way to...
02/08/2011
- 06:06 PM Bug #5289: Change report instance margins from transparent to white
- fixed at r27060. The margins (or whatever they're called) around the report are still transparent, but I guess that's...
- 04:45 PM Bug #5295: Report designer panel gui simplification and spacing
- finished at r27056
No longer have Show Ports and Show Relations checkboxes for Items of Interest Outline tab, giving ... - 04:20 PM Bug #5297: Workflow Run Manager - no indication of progress during preview runs download
- "fixed" at r27053.
Step #3 now takes about 2s instead of 17.
Refactoring to show the preview runs as they're importe...
02/07/2011
- 02:36 PM Bug #5297: Workflow Run Manager - no indication of progress during preview runs download
- This bug is just for fetching data needed to build "preview" WorkflowRuns (bits from the karXML, not the kars or enti...
- 12:57 PM Bug #5297: Workflow Run Manager - no indication of progress during preview runs download
- Derik,
When we discussed this before, I think we concluded that the search time was largely due to Kepler issuing an... - 12:42 PM Bug #5297 (Resolved): Workflow Run Manager - no indication of progress during preview runs download
- There are currently about 131 run-kars on kepler-dev. Switching to kepler-dev from the workflow run manager for the f...
- 12:09 PM Bug #5296 (Resolved): Workflow Run Manager - multiple window, remote store gui refresh issue
- If you have two windows open, and in both connect the WRM to the same remote repository using the dropdowns in rapid ...
02/04/2011
- 06:58 PM Bug #5295: Report designer panel gui simplification and spacing
- Fixed the first part of this -- wrt sizing of the left panels-- at r27030.
Now need to determine if Show Ports and Sh... - 05:02 PM Bug #5295 (Resolved): Report designer panel gui simplification and spacing
- 'Items of Interest' doesn't get enough room, and 'Report Formatting Items' gets too much.
The checkboxes (Show Por... - 03:33 PM Bug #4604: Make aesthetic changes to tagging interface
- I think all these have been fixed except for tags wrapping.
- 03:26 PM Bug #4981: RIO pdfs don't show up in the Component Library
- Adding dependency on bug#5276, since whatever we decide to do for that bug will likely affect / possibly fix this bug.
- 03:19 PM Bug #4136: Workflow Run Manager - date and duration search should allow single operator-less arguments
- Closing, I think we've decided the desirable searches types are now covered. Date search allows a single date without...
- 02:10 PM Bug #5276: component search performance is poor
- Discussed this with Jing. We think the schema is too loose right now, and we should change it so that we can rely on ...
- 01:27 PM Bug #5276: component search performance is poor
- just reformatting jing's above example as we discuss it:
<document>
<docid>878.72.1</docid>
<docname>kar</docname>... - 01:20 PM Bug #5276: component search performance is poor
- <?xml version="1.0"?>
<resultset>
<pagestart>0</pagestart>
<pagesize>0</pagesize>
<nextpage>1</nextpage>
<pre... - 01:17 PM Bug #5229: Poor component search performance
- duplicated bug
02/03/2011
- 06:22 PM Bug #5293: Deleting a report item scrolls you to top of design
- basically fixed with r26988, but not quite satisfied with the location you're scrolled to when you delete an item. lo...
- 05:12 PM Bug #5293 (Resolved): Deleting a report item scrolls you to top of design
- This is really annoying when you're trying to delete items from a long report design; with each delete you lose your ...
- 05:09 PM Bug #5088: Report designer gui difficult to use with greater than about 3-4 items
- fixed at r26960
02/02/2011
- 05:13 PM Bug #4544: Enter key in Report Designer title invokes a search
- fixed at r26896. This took awhile to track down. Turns out the searchButton was the set defaultButton for the jRootPa...
- 01:12 PM Bug #4753: create gui for scheduled execution of sensor workflows on server
- This a general bug. The specific bugs have been created and fixed.
- 01:11 PM Bug #5236: The list on the left panel of the scheduler should only show WF objects that can be scheduled.
- Bug is fixed base the solution on comment 1. If we have any new suggestion, we can open another bug.
- 01:09 PM Bug #5235: Scheduler GUI can schedule any wf (even local ones).
- When user tries to schedule a local workflow, it will be uploaded to the saving repository first. The functionality i...
- 01:08 PM Bug #4754: update metacat workflow execution scheduler
- the scheduler server code stands alone in svn. We create scheduler-gui module in kepler
- 12:03 PM Bug #5283: UI for saving workflows as xml is confusing
- The main problem is that currently KARs are not backwards-compatible (see bug 5280), and so XML remains the preferred...
- 11:57 AM Bug #4483: Module dependencies in MoML files
- We no longer write any module dependency info into the moml, but certain things from modules may still be written int...
- 11:34 AM Bug #5290 (New): originModule not always set
- The <originModule> property is added to configuration files so that properties will be ignored when their originating...
- 11:26 AM Bug #5247: Allow user to set memory allocated to Kepler from within Kepler
- This does not work when using kepler.sh.
Additionally, it appears the settings are saved in build-area/settings/memo...
02/01/2011
- 06:21 PM Bug #5289 (In Progress): Change report instance margins from transparent to white
- At some point some months ago, I noticed report pdfs having transparent, instead of white, backgrounds, which make th...
- 05:43 PM Bug #4544: Enter key in Report Designer title invokes a search
- Retargeting, I want this fixed.
- 05:40 PM Bug #5088: Report designer gui difficult to use with greater than about 3-4 items
- Imo this seriously degrades the reporting user experience, retargeting.
- 05:29 PM Bug #4755: update workflow run manager and reporting to display runs of sensor workflows
- WRM now shows allows you to view remote runs and associated report artifacts.
- 05:25 PM Bug #5062: create bugs, mockups, eng view page updates showing how authentication will work
- These mockups never got made, but authenticating for the scheduler and the WRM is done now. Both use the authenticati...
- 05:20 PM Bug #5032: Workflow Run Manager - ability to connect to different prov stores from gui actions
- Closing, this is basically all done now. Any issues for the WRM wrt remote stores can be opened as new bugs.
- 05:11 PM Bug #5033: Workflow Run Manager - Allow multiple instances of WRM in one Kepler instance
- Closing
- 05:06 PM Bug #5049: Prompt for credentials when connecting to remote kepler server
- I removed the authenticate checkbox at r26873. Now like Component search you're just prompted to login (if you're not...
- 04:42 PM Bug #5083: possible to save a kar that loses the report layout
- Re: comment#3, stopgap no longer seems necessary -- I commented it out and tested the scenario in the bug description...
- 03:06 PM Bug #5017: ReportLayout LSID and referral list should be maintained
- I'm having trouble understanding the "problem" described in comment#15 at this point, so I'll just trust my comment#1...
- 03:02 PM Bug #5009: Opening two KARS that have the same Workflow, but that have different report layouts, will make the first layout refresh itself with the layout from the KAR that was opened most recently.
- I merged a long time ago, just tested on trunk and works.
01/31/2011
- 06:20 PM Bug #5248: downloading non-public kars from Search Components doesn't work
- Jing patched the kepler repository tonight, and Component search against the kepler repository works. Closing.
- 06:05 PM Bug #5061: Report Design Panel needs fixing wrt event listening
- I merged this fix a long time ago. Double checked with a few textareas tests on trunk just now. Works.
- 06:02 PM Bug #4524: no prompt to save a changed report
- I merged a long time ago. Just tried and works on trunk, closing.
- 05:54 PM Bug #5091: Dragging and dropping report layout items NPEs
- This seems to be caused by dragging a report layout item over a text-area.
- 04:07 PM Bug #5252: Plotting bugs
- I have fixed items 1-4. 5 is sort of fixed; ports of definitely the wrong type (ie. (double for timestamp, double for...
- 03:52 PM Bug #5287 (Resolved): Remove the override of ActorMetadataKAREntryHandler
- Currently, the fix to bug 5251 is implemented in the form of an override to org.kepler.kar.handlers.ActorMetadataKARE...
- 02:37 PM Bug #5286 (Resolved): Remove the override of EntityTreeModel
- Currently, the class ptolemy.vergil.tree.EntityTreeModel is being overridden in sensor-view. This is to allow it to s...
- 02:29 PM Bug #5272: kepler 2.1 suite can not be started using 'ant run'
- Fixed.
The trunk build can now run the kepler-2.1 branch.
I also branched the build (to build-area-2.1) so that we ... - 02:28 PM Bug #5251: using File->Open MoML... always opens model into Sensor Site view
- Fixed in r26872.
Note: This is fixed with an override of the class org.kepler.kar.handlers.ActorMetadataKAREntryHand... - 02:00 PM Bug #5285 (New): NPE on restart using newly created suite
- User reports being unable to restart with their own suite that depends on the provenance suite:
"Debugging shows m... - 01:13 PM Bug #5129: adding and removing configuration properties could be made easier
- I have sent an email to kepler-dev to get responses from people who have made configuration changes since Kepler 2.1....
- 01:07 PM Bug #5282: Documentation updates for 2.2
- Not doing a huge documentation review for 2.2. In the future, changes that affect the user experience and therefore t...
- 12:06 PM Bug #5049: Prompt for credentials when connecting to remote kepler server
- Prompting for credentials when connecting a WRM to a remote kar-store happens now, if the user has selected the 'auth...
- 12:03 PM Bug #5132: Connecting Workflow Run Manager to remote KAR store should prompt for credentials
- Marking duplicate of bug#5049
01/28/2011
- 06:28 PM Bug #5232: unable to open KARs saved beneath absent (e.g. third party) modules
- Fixed at r26866.
ImportModuleDependenciesAction dialogs now offer a Force Open option. - 06:06 PM Bug #5272: kepler 2.1 suite can not be started using 'ant run'
- Increasing importance, this has been getting in my way, and is likely to come up again soon for the two users who hav...
- 02:00 PM Bug #5277: remove test servers from Sources preferences
- Done at r26860.
- 09:37 AM Bug #5284 (New): Set uploadToServer to be true at configuration.xml
- When we set up kepler run engine, we always have to change the value from false to true. Why we set it to be false? I...
01/27/2011
- 01:49 PM Bug #4516: Module Manager needs ability to install modules needed by KARs
- I did work on this for bug#5099 . Attempting to open a kar with unsatisfied mod deps now prompts the user to download...
- 12:26 PM Bug #5120: Provide a toggle for automatic updates
- David implemented a toggle for checking for patches on startup, should this be closed now? Was a conclusion reached w...
01/26/2011
- 05:01 PM Bug #5248: downloading non-public kars from Search Components doesn't work
- So we don't forget: the changes to always use authenticated query and gets necessitate a fix to an xslt file --Jing f...
- 01:57 PM Bug #5272: kepler 2.1 suite can not be started using 'ant run'
- Another user tried to build kepler execution eninge base on kepler-2.1
but he get the same error. - 11:32 AM Bug #5283: UI for saving workflows as xml is confusing
- We discussed this extensively before 2.1. My 2 cents:
The main issue is that the xml format is incomplete and does ... - 11:24 AM Bug #5283 (Resolved): UI for saving workflows as xml is confusing
- The following comments were relayed to me by a group of users running Kepler 1.0, and trying 2.x for the first time:
... - 11:31 AM Bug #5129: adding and removing configuration properties could be made easier
- I'm reopening this -- now that this directive solution has been implemented, someone needs to utilize it to update th...
- 11:23 AM Bug #5282 (Resolved): Documentation updates for 2.2
- Docs need to be updated for 2.2
- 11:19 AM Bug #5281 (New): cannot open 1.0 KARs
- KARs created in Kepler 1.0 cannot be opened.
An example is 04-HelloWorld.kar in the outreach module:
[run] WARN... - 11:18 AM Bug #5280 (Resolved): missing command line execution for KAR files
- KAR files cannot be used with kepler.sh.
The workflow in a KAR cannot be run with any of the -gui/-nogui, -cache/-... - 11:14 AM Bug #5279 (Resolved): HSQL databases use default account
- The HSQL databases should not use the default account name and password.
- 11:12 AM Bug #5278 (Resolved): HSQL database is shared between users
- Kepler starts an HSQL database server so that multiple instances of Kepler can run on the same machine. (For more inf...
01/25/2011
- 04:49 PM Bug #5277 (Resolved): remove test servers from Sources preferences
- Before release we need to remove the test server options from Components and Data search.
- 04:30 PM Bug #4430: hsql database name and port in Kepler should be configurable
- The ports and names are set in the configuration files:
common/resources/configurations/configuration.xml
core/resou... - 04:15 PM Bug #5276: component search performance is poor
- Components search can also fail because of a java.lang.OutOfMemoryError. Here are two examples stacktraces
searching... - 03:33 PM Bug #5248: downloading non-public kars from Search Components doesn't work
- no-frills fix in r26836.
Going to test/talk with jing and matt before closing.
01/24/2011
- 02:37 PM Bug #5274: Trying to schedule workflow with report layout puts up prompt about no report layout
- The problem is when kepler evaluated the type in a kar entry, it used "equals" "ReportLayout". When we uses "contains...
- 02:21 PM Bug #5276 (New): component search performance is poor
- Searching for remote KARs through the Components pane is very slow -- search downloads and deals with karXML, each ge...
- 02:10 PM Bug #5248: downloading non-public kars from Search Components doesn't work
- Discussed with Matt, I'll take this one.
- 10:29 AM Bug #4324: ptII/module-info/revision.txt not being updated
- I also added the same information as above to the Kepler Project wiki: https://kepler-project.org/developers/referenc...
- 10:25 AM Bug #4324: ptII/module-info/revision.txt not being updated
- A cron job has been started on lore.genomecenter.ucdavis.edu to run 'ant validate-ptolemy' every midnight. The revisi...
01/21/2011
- 01:07 PM Bug #5275: Executing sensor-view workflow records provenance
- Works. On import provenance turns off, and attempting to turn it back on, even during execution of sensor workflow, i...
- 12:34 PM Bug #5275: Executing sensor-view workflow records provenance
- Should be fixed. Derik, please check.
01/19/2011
- 09:11 PM Bug #5248: downloading non-public kars from Search Components doesn't work
- A) I don't believe it makes sense to have non-public entries showing up in the public searches. I can see how this er...
- 06:07 PM Bug #5248: downloading non-public kars from Search Components doesn't work
- My changes in r26708 are probably worth looking at when looking at this bug.
- 03:37 PM Bug #5275 (Resolved): Executing sensor-view workflow records provenance
- Executing a sensor view workflow isn't supposed to record data to provenance because the director is DE.
Replicate... - 03:01 PM Bug #5153: Save As... closes all windows associated with a workflow
- Pushing further investigation on this enhancement to 2.3. As reported by Aaron, this does not appear to be a current ...
- 01:08 PM Bug #5263: failure to restart after upgrade from 2.0 to 2.1
- Added documentation. This should not be a problem going forward, due to a change in how the module manager works.
- 12:44 PM Bug #4801: out of memory
- Postponing to 2.3.
- 12:43 PM Bug #5249: test kepler for memory leaks
- Postponing to 2.3.
- 12:43 PM Bug #4642: memory usage & slowdowns
- Postponing to 2.3.
- 12:41 PM Bug #5258: kepler start exception when soft links are in KeplerData/workflows/MyWorkflows
- Since this is an obscure problem that isn't likely to occur in the normal use of Kepler, postponing.
- 12:27 PM Bug #5272: kepler 2.1 suite can not be started using 'ant run'
- It might not be a block for kepler 2.2 installation package release. But many users download kepler based on release-...
Also available in: Atom