Activity
From 08/05/2012 to 09/03/2012
08/31/2012
- 07:50 PM Bug #5703: GUI bug - Deleting an Actor with connected port causes a diamond relation to be created.
- The problem is reproducible after this change:
2012-08-18 17:08 eal
* [r64430] /trunk/ptolemy/actor/Manager.java,
... - 04:27 PM Bug #5703: GUI bug - Deleting an Actor with connected port causes a diamond relation to be created.
- I think I was wrong about what causes this, more to follow.
- 04:20 PM Bug #5703: GUI bug - Deleting an Actor with connected port causes a diamond relation to be created.
- I think is caused by one of these changes:
2012-08-23 21:43 eal
* [r64468] /trunk/diva/canvas/interactor/BasicGra... - 01:49 PM Bug #5703 (Resolved): GUI bug - Deleting an Actor with connected port causes a diamond relation to be created.
- In the last week or so I've begun seeing a few GUI anomalies on trunk. One is:
Deleting an actor with a connected ... - 01:51 PM Bug #5702: GUI bug - Initial actor port positioning is wrong
- Dan notes he's been seeing this a lot in actor documentation frames (see attachement). Note how the parameters also o...
- 01:37 PM Bug #5702 (Resolved): GUI bug - Initial actor port positioning is wrong
- In the last week or so I've begun seeing a few GUI anomalies on trunk. One is:
Actor port positioning isn't correc... - 01:47 PM Bug #5701: CT was removed, demo workflows need to be updated
- I updated the demos to use Continous.
The affected demos were
./workflows/demos/getting-started/02-LotkaVolterraPreda... - 01:13 PM Bug #5701 (Resolved): CT was removed, demo workflows need to be updated
- The CTDirector and associated actors were removed:
----------
Author: cxh
Date: 2011-07-26 14:55:43 -0700 (Tue, 26...
08/30/2012
- 09:37 PM Bug #5681: Tracking bug for sensor-view-0.9.0 release testing
- Released. Closing.
- 09:00 PM Bug #5681: Tracking bug for sensor-view-0.9.0 release testing
- I made a KSP page:
https://kepler-project.org/users/add_on_modules/kepler-sensor-platform-and-sensor-view
Going to r... - 05:34 PM Bug #5681: Tracking bug for sensor-view-0.9.0 release testing
- Moving to 1.x.y target.
- 06:09 PM Bug #5684: Add warning to archiving workflow that it must be run on one machine to not produce overlapping datasets
- I added the warning at r30585.
- 05:34 PM Bug #5684: Add warning to archiving workflow that it must be run on one machine to not produce overlapping datasets
- Moving to 1.x.y target.
- 06:03 PM Bug #5583: Sensor Simulator controllable through Kepler
- Changing to enhancement for making it easier (built in gui in kepler) to launch simulator.
This is less critical now ... - 05:34 PM Bug #5583: Sensor Simulator controllable through Kepler
- Moving to 1.x.y target.
- 05:57 PM Bug #5683: archiveDataturbineDataToMetacat.kar can fail with an IOException on win7 and XP
- I included jing's two changes into the branches at r30470 and r30432.
- 05:34 PM Bug #5683: archiveDataturbineDataToMetacat.kar can fail with an IOException on win7 and XP
- Moving to 1.x.y target.
- 05:34 PM Bug #5686: datasets produced by archiveDataturbineDataToMetacat workflow show samples 'sliding' in time
- Moving to 1.x.y target.
- 05:34 PM Bug #5685: data isn't always chunked properly
- Moving to 1.x.y target.
- 05:34 PM Bug #5202: update existing site layout with span changes
- Moving to 1.x.y target.
- 05:34 PM Bug #5675: new ProgressMeter demo workflows give errors when opening in sensor-view-0.9.0
- Moving to 1.x.y target.
- 05:34 PM Bug #5363: spanTodt performance
- Moving to 1.x.y target.
- 05:34 PM Bug #5679: the workflows in sensor-view should be resaved beneath sensor-view-0.9.0 so users aren't prompted to force open them
- Moving to 1.x.y target.
- 05:34 PM Bug #5377: DataTurbine actor fetch time outs (blockTimeout param not used?)
- Moving to 1.x.y target.
- 05:34 PM Bug #5341: Belkin f5u409 usb=>serial dongle periodically stops working
- Moving to 1.x.y target.
- 05:34 PM Bug #5678: growingDegreeDays workflow at kepler repository has type resolve error
- Moving to 1.x.y target.
- 05:01 PM Bug #5633: Actor/Attribute Search/Find Facility needs menu choices
- Feel free to refactor the methods in SearchResultsDialog into BasicGraphFrame.
Note that there is this method in Basi... - 04:47 PM Bug #5633: Actor/Attribute Search/Find Facility needs menu choices
- I added a search panel for the workflow outline.
It'd be nice if clicking on the results highlighted the actors on t...
08/29/2012
- 09:44 PM Bug #5587: long parameter values get replaced with scrollbar
- This is fixed.
I added code to Query:
protected static void _textAreaSetRowsAndRepackParent(JTextArea textArea,
... - 08:27 PM Bug #5587: long parameter values get replaced with scrollbar
- The problem is that JTextArea should not be used when there is just a single
line and no scroll bar.
http://docs.ora... - 08:29 PM Bug #5659: Kepler CaseGraphFrame and CaseGraphTableau have duplicated Ptolemy code.
- I'm reassigning this to Dan.
There has to be a better way to do this than to duplicate a bunch of code. - 08:21 PM Bug #5457: Mac OS X: Kepler.app should display module error messages in a window
- This is fixed.
How I checked is by creating an installer:
ant make-mac-installer -Dversion=2.4.0001
Then installin...
08/28/2012
- 05:23 PM Bug #5700 (Resolved): after getting an actors patch, actor changes won't be visible to user until .kepler is removed
- In testing a pending patch to actors, I found my changes to an actor didn't appear in the library until .kepler was m...
- 05:03 PM Bug #5457: Mac OS X: Kepler.app should display module error messages in a window
- I checked in a fix. Reassigning to Christopher to test.
- 03:44 PM Bug #5587: long parameter values get replaced with scrollbar
- I'm reopening since this is occurring again. The steps in comment 2 will demonstrate the problem. I verified again th...
08/27/2012
- 06:18 PM Bug #5692: Values not committed to actors
- There seams something to it.
Tested clicking on the Commit button in different ways;
Normal clicks - ie without hor... - 11:50 AM Bug #5692: Values not committed to actors
- I'm so glad you were able to track it down and provide us w/ these details. If you find anything else related please ...
- 05:15 PM Bug #5699 (New): Change the workflow scheduler server documentation link in the workflow-scheduler-gui module
- Currently the the workflow scheduler server documentation points to the svm trunk version. In the next workflow-sched...
08/26/2012
- 06:40 PM Bug #5692: Values not committed to actors
- [Sorry the the delay, I only work Mon-Wed]
Due to rsi I use a pen and tablet for mouse input, the problem seams to b...
08/25/2012
- 02:54 AM Bug #5685: data isn't always chunked properly
- (The above was an example of a metadata change that didn't make it through to DT.)
(In reply to comment #4) - 02:45 AM Bug #5685: data isn't always chunked properly
- Sensor actor appears to be properly setting span metadata:
[run] SpanControl.setMetadataForSensor(Batt_Volt,CR8... - 02:17 AM Bug #5685: data isn't always chunked properly
- Doesn't look like trolling through the archive will be necessary. The same problem of a datapackage containing two da...
- 12:43 AM Bug #5694: Dragging from a port results in a NPE
- Fixed this particular issue in reporting's WorkflowManager at r30536.
(In reply to comment #4)
> There's a new issue...
08/24/2012
- 07:35 PM Bug #5403: Improve the performance of the workflow archiving data from dataturbine to metacat
- I forgot to add that the auth error was due to dc=edu instead of dc=org, when trying to save to dev2.
I committed th... - 05:49 PM Bug #5403: Improve the performance of the workflow archiving data from dataturbine to metacat
- Today I did a bunch of testing of the new (archiveModified.xml -- attached) and the existing (archiveDataturbineDataT...
- 06:27 PM Bug #5685: data isn't always chunked properly
- RBNB archive containing suspected missing metadata entries for various sampling rate changes. Get DT to load this, us...
- 06:23 PM Bug #5685: data isn't always chunked properly
- I thought about this some more last week, and remembered that I saw some errors when changing sensor sampling rates f...
- 01:58 PM Bug #5210: Focus stolen from user trying to drag components around during execution
- This is still a problem on trunk: dragging around an updating sensor actor and you lose your grab on the actor when i...
- 01:02 PM Bug #5588: Enter and Tab behavior has changed in parameter configuration dialog
- Looks good. Thanks, Patricia!
- 12:44 PM Bug #5598: parameters appear as white boxes instead of dots
- I was able to replicate the WRM fail to Force Open issue w/ this run kar. I opened bug#5697 for it.
(In reply to com... - 10:17 AM Bug #5598: parameters appear as white boxes instead of dots
- I could not get the workflow run manager to work for me under Windows.
I found https://code.kepler-project.org/code/... - 12:41 PM Bug #5697 (New): Workflow Run Manager can fail to Force Open a run kar that Kepler can
- After connecting the Workflow Run Manager (2.3.0) to the kepler library and using it to download the attached run kar...
- 11:37 AM Bug #5485: standalone Module Manager can break Kepler app ability to startup
- I'm unable to reproduce.
- 10:19 AM Bug #5398: Re-install of Kepler-x.y doesn't overwrite modules.txt
- As discussed, new bug is create at bug 5695. close this one.
- 10:18 AM Bug #5695 (New): more automatic module update process.
- As discussed for bug 5398, We should discuss the usability perspective of module upgrade management. Some of the proc...
- 08:57 AM Bug #4903: Text in attributes not rendered properly
- This screenshot is of outreach/workflows/demos/Matlab/MatlabExpression.xml
when run with
ant vergil -Dmodel=outreach... - 08:53 AM Bug #4903: Text in attributes not rendered properly
- Also, outreach/workflows/demos/Matlab/MatlabExpression.xml has an an
Attribute that is supposed to show the name of t... - 08:50 AM Bug #5677: SDF Iterations now defaults to AUTO
- I added ptolemy.moml.filter.AddMissingParameter that will add iterations set
to 0 if it is missing from a SDFDirector...
08/23/2012
- 06:33 PM Bug #5694: Dragging from a port results in a NPE
- There's a new issue on trunk related to NamedObjId: if I drag out a String Constant and configure it with a new value...
- 04:20 PM Bug #5694: Dragging from a port results in a NPE
- Christopher, to reproduce this revert r30498 and connect two ports.
The problem is caused by the updates in r64430 t... - 03:17 PM Bug #5694: Dragging from a port results in a NPE
- I think Dan's comment was referring to a change he made at r30498. After that change I haven't been able to replicate...
- 03:01 PM Bug #5694: Dragging from a port results in a NPE
- We can't seem to replicate this bug locally right now.
Edward checked in a fix that might help with the NPE.
I'm go... - 02:45 PM Bug #5694 (Resolved): Dragging from a port results in a NPE
- Dan wrote:
--start--
The problem is related to the change listener in
org.kepler.moml.NamedObjId. When the workf... - 04:27 PM Bug #5637: composite window size & position not always saved
- I verified this is fixed for MoMLs and KARs. Thanks, Christopher!
- 03:46 PM Bug #5266: Two empty boxes inside Sinewave actor and other icon problems for attributes
- I've uploaded a Sinewave that is not an actor oriented composite and the
screen shot.
The problem persists.
I've re... - 12:26 PM Bug #5266: Two empty boxes inside Sinewave actor and other icon problems for attributes
- Redispatching to myself so that I can create a non-Actor Oriented Class version
of Sinewave. - 12:41 PM Bug #5693 (New): decide on issuing patches so older versions of kepler can upload accessible items to Metacats > 2.0
- Do we want older versions of Kepler to be able to upload easily accessible items to Metacat >2.0 repositories? If so ...
- 12:16 PM Bug #4903: Text in attributes not rendered properly
- ModelRepaintController is not in the Kepler Library, it should be added.
ShowTypes is in the Kepler Library, but rend... - 11:48 AM Bug #5677: SDF Iterations now defaults to AUTO
- One fix is to run ptolemy/domains/sdf/kernel/fixSDFIterations on the .xml file.
The real fix would be to create a fi... - 11:43 AM Bug #5677: SDF Iterations now defaults to AUTO
- Matlab demo workflow needs to be fixed: top level SDF used the default 0, but now is AUTO.
- 11:40 AM Bug #5677: SDF Iterations now defaults to AUTO
- current settings:
The 'Auto' means '1' at top level and '0' inside of a composite actor. The
'UNBOUNDED' means '0'. ...
08/22/2012
- 05:52 PM Bug #5692: Values not committed to actors
- I don't see anything unusual there.
I'm running short of ideas. Are you sure you're clicking Commit and not Cancel? ... - 05:34 PM Bug #5529: Documentation for some actors such as Run Composite Actor is empty
- Daniel, this bug looks fixed (thanks), so I'm closing it.
- 05:18 PM Bug #5529: Documentation for some actors such as Run Composite Actor is empty
- I added documentation based on the javadocs to:
AddPointToSVG.xml
AlignmentEditor_Seaview.xml
ArchiveCounter.xml
Arr... - 04:45 PM Bug #5188: closing workflow does not save the location change of popup display windows.
- Thanks for fixing this, Christopher. I verified it's fixed for MoMLs and KARs.
- 10:58 AM Bug #5688: library not working in kepler trunk in windows7
- I've checked in a fix. Reassigning to Derik to verify.
08/21/2012
- 09:33 PM Bug #5692: Values not committed to actors
- Thank you for your attention and quick turn around, alas still no joy,
re installed Kepler 2.3
uninstalled java
do... - 07:38 PM Bug #5692: Values not committed to actors
- Yes, it's a known issue that 2.2 won't launch from its icon after installing 2.3. You can use the Kepler Module Manag...
- 07:05 PM Bug #5692: Values not committed to actors
- Uninstalled Kepler
Re installed 2.3
Reproduced error.
Restarted
Reproduced error.
Uninstalled Kepler 2.3
instal... - 06:35 PM Bug #5692: Values not committed to actors
- I cannot replicate. I:
- installed Kepler 2.3.0 in Windows 7
- started Kepler
- dragged out an Rexpression actor from... - 05:41 PM Bug #5692 (New): Values not committed to actors
- Values not committed to actors
Open new Kepler workflow
Drag RExpression from Components tree
double click RExpr...
08/20/2012
- 04:27 PM Bug #5691 (New): parameter choices are not saved
- The choices for Parameter.addChoice() are not written when the model is saved.
08/18/2012
- 06:24 PM Bug #4908: actor/director/attribute .xml file documentation needs to be updated
- The Kepler documentation for PN was updated in 2010 with the information on how to stop the model:
----
r23513 | bro... - 04:57 PM Bug #4068: File Menu should display 5 most recently used workflows
- I increased the list size to 10 and updated TextEffigy and ExpressionShellEffigy to not open KARs.
- 04:55 PM Bug #5280: missing command line execution for KAR files
- I updated TextEffigy to not open files with binary extensions. I also updated ExpressionShellEffigy to not create a w...
- 04:51 PM Bug #5625: create kepler documentation for 2.4
- Add new command-line options for executing KARs, redirecting display actors, etc. See the full list here: https://kep...
- 02:28 AM Bug #5403: Improve the performance of the workflow archiving data from dataturbine to metacat
- I got the EcogridWriter changes merged into trunk, finished at r30478.
After this I tried to swap in CreateDataSetsF... - 01:14 AM Bug #5690 (New): problems with updateActorDocs
- I ran into a few issues updating EcogridWriter documentation using:
./kepler.sh -updateActorDocs actors/resources/ka...
08/17/2012
- 07:46 PM Bug #5403: Improve the performance of the workflow archiving data from dataturbine to metacat
- Just ran this workflow again (albeit w/ provenance on) and it took 13:54 to run, for not a great deal of data. That's...
- 07:44 PM Bug #5689 (New): remove configs/.../configuration.xml override
- The Ptolemy Configuration MoML for Kepler is in:
common/configs/ptolemy/configs/kepler/configuration.xml
This i... - 07:41 PM Bug #5683: archiveDataturbineDataToMetacat.kar can fail with an IOException on win7 and XP
- Ok, I was able to run the workflow in win7 with this change, and datasets were archived.
I did see a complaint from ... - 04:03 PM Bug #5683: archiveDataturbineDataToMetacat.kar can fail with an IOException on win7 and XP
- The temporary file name contains ":". So windows doesn't like it. I substituted ":" by"_". I tested on both mac and w...
- 02:11 PM Bug #5683 (Resolved): archiveDataturbineDataToMetacat.kar can fail with an IOException on win7 and XP
- When trying to run the archival workflow on win7, I got this error. Jing got it today in XP.
ptolemy.kernel.util.I... - 07:12 PM Bug #5688 (Resolved): library not working in kepler trunk in windows7
- Right now the tree doesn't display properly when you launch kepler from trunk in windows7, only 1 item shows up, the ...
- 07:02 PM Bug #5625: create kepler documentation for 2.4
- Fix references: FSM -> Modal and CT -> Continuous.
SDF default iterations is now 1. - 06:49 PM Bug #5660: ExtensionFileFilter is a duplicate of a Ptolemy class
- Looks good. Thanks, Christopher.
- 06:49 PM Bug #5426: workflow lsid changes when running from command line
- I created #5687 for 2.5.
- 06:48 PM Bug #5687 (New): investigate alternatives to workflow versioning
- As described in bug #5426, the same workflow can be identified differently when executed on different machines. I fix...
- 04:39 PM Bug #5686 (New): datasets produced by archiveDataturbineDataToMetacat workflow show samples 'sliding' in time
- Data sample times slowly increase, e.g. second by second, over time, instead of staying on expected markers. This mak...
- 04:29 PM Bug #5685 (New): data isn't always chunked properly
- Jing ran the workflow in Windows XP today, and it produced at least one datapackage with data from different sampling...
- 04:23 PM Bug #5684 (Resolved): Add warning to archiving workflow that it must be run on one machine to not produce overlapping datasets
- See http://bugzilla.ecoinformatics.org/show_bug.cgi?id=5401
- 11:35 AM Bug #5682 (New): ontology classes require unique label
- The ontology classes have both an ID and label. If the ID is unique, but the label is not, then the class does not ap...
08/16/2012
- 03:10 PM Bug #5674: The patch downloader dialog can fail to automatically restart Kepler
- Happened to me in 10.7 too when starting from scratch.
- 01:44 PM Bug #5674: The patch downloader dialog can fail to automatically restart Kepler
- I did see this again on 10.8 after starting the test procedure again from scratch.
- 02:40 PM Bug #5681: Tracking bug for sensor-view-0.9.0 release testing
- Also need to create a webpage for the Kepler Sensor Platform that the release announcement can refer to, with more in...
- 02:36 PM Bug #5681 (Resolved): Tracking bug for sensor-view-0.9.0 release testing
- I've already gone through a few rounds of testing on Mac 10.8 and Win7.
During the last round Jianwu, Dan, and Jing ... - 01:21 PM Bug #5679: the workflows in sensor-view should be resaved beneath sensor-view-0.9.0 so users aren't prompted to force open them
- I've made various minor workflow improvements, resaved beneath 0.9.0, moved out workflows better located in DT module...
- 01:05 PM Bug #5680 (Resolved): after inline save, demo workflow disappears from tree
- When I open a demo workflow from the tree, change it and save, it disappears from its location.
If I then close t...
08/15/2012
- 06:28 PM Bug #5679 (In Progress): the workflows in sensor-view should be resaved beneath sensor-view-0.9.0 so users aren't prompted to force open them
- Now that sensor-view-0.9.0's suite list is finalized, the sensor-view demo workflows should be saved beneath it inste...
- 06:03 PM Bug #5637: composite window size & position not always saved
- I consulted with Edward and he was fine with fixing this.
Edward wrote:
> If I now open a composite, zoom in, the clo... - 04:27 PM Bug #5678 (New): growingDegreeDays workflow at kepler repository has type resolve error
- After talking to Derik, reconfiguring the DT actor to use nibbler.nceas.ucsb.edu works for me. Derik said maybe more ...
- 07:24 AM Bug #5588: Enter and Tab behavior has changed in parameter configuration dialog
- Patricia's fixes seem to have solved the problem of enter not closing a dialog.
I'm assigning this to Daniel for rev... - 07:17 AM Bug #5188: closing workflow does not save the location change of popup display windows.
- I believe this is fixed. I'm reassigning this to Daniel for him to test.
- 07:15 AM Bug #5546: SDF director iterations parameter default of 0 is unfriendly
- Closing.
There is a separate bug #5677 for documentation changes.
08/14/2012
- 06:40 PM Bug #5188: closing workflow does not save the location change of popup display windows.
- I checked in a change that may have fixed this, further testing is needed.
- 06:09 PM Bug #5188: closing workflow does not save the location change of popup display windows.
- In Ptolemy:
1) Create SDFDirector, Const->Display model
2) Run the model
3) Drag the Display Actor to a new location
... - 06:33 PM Bug #5602: Timezone confusion using the scheduler
- Closing, the workflow runengine and scheduler are working now w/ sensor-view-0.9. There were a few additional problem...
- 05:38 PM Bug #5637: composite window size & position not always saved
- To save the location of a subcomposite, do File -> Save in the subcomposite.
The contsructor in ptolemy/actor/gui/Wi... - 11:44 AM Bug #5677 (Resolved): SDF Iterations now defaults to AUTO
- The iterations parameter of the SDFDirector defaults to AUTO.
See bug #5546.
To close this bug:
1) Update the K... - 11:43 AM Bug #5546: SDF director iterations parameter default of 0 is unfriendly
- I'm appending the thread in pt-dev about this.
I made the fix (call isEmbedded()).
Derik asked about creating a fil...
08/13/2012
- 11:55 AM Bug #5675: new ProgressMeter demo workflows give errors when opening in sensor-view-0.9.0
- I've saved the new ProgressMeter moml demos from beneath sensor-view-0.9, to get rid of errors like the above. I also...
08/10/2012
- 07:03 PM Bug #5675 (New): new ProgressMeter demo workflows give errors when opening in sensor-view-0.9.0
- There are a few errors when opening these xml workflows beneath sensor-view-0.9.0, despite working in trunk, e.g.:
... - 04:48 PM Bug #5674 (New): The patch downloader dialog can fail to automatically restart Kepler
- In pre-release sensor-view-0.9 testing on os X 10.8, I found Kepler-2.3's patch downloader gui can fail to automatica...
- 04:44 PM Bug #5673 (New): if user has newer version of module than exists in repository, old version will be downloaded
- Summary: We should probably fix the logic here -- don't download an older version of a module a user already has.
... - 03:53 PM Bug #5672 (New): java -jar sensorview-utils-1.0.jar should invoke a simple java app that prints help
- It would be nice if the sensorview-utils-1.0.jar had a default main class target that was a simple java app that prin...
- 03:34 PM Bug #5457: Mac OS X: Kepler.app should display module error messages in a window
- In 10.8 the Console app is a little different, and I don't see any messages from the Kepler app in it. Hopefully ther...
- 01:18 PM Bug #5671 (New): Workflow Run Manager tries to connect to keplerDevRepository as a database instead of kar store
- If you enable kepler dev in your local trunk repository and authentication configuration.xml files, the Workflow Run ...
- 12:01 PM Bug #5670: see if runtimemonitor module can be deleted, contains duplicate code
- Hi Bertram, do you know the status of the ProcessCentral and pws module work?
08/09/2012
- 07:02 PM Bug #5602: Timezone confusion using the scheduler
- Jing and I debugged tonight. The problem was the repository configuration.xml didn't include kepler-dev. It must've b...
- 06:45 PM Bug #5670 (New): see if runtimemonitor module can be deleted, contains duplicate code
- The runtimemonitor module contains these classes:
./runtimemonitor/FigureUpdater.java
./runtimemonitor/MonitorAtt... - 04:57 PM Bug #4978: Create additional 'module' property for any menu entries that are inserted by non-core modules
- Ok, I *did* just see this when starting sensor-view from cmd line:
[run] *** Attempting to get ResourceBundle ... - 12:38 PM Bug #5669 (Resolved): replace ProjectLocator.findKeplerModulesDir() with something more robust.
- This method is problematic. Bug#5458 also mentions it.
/**
*
* FIXME replace this with something(...
08/08/2012
- 06:01 PM Bug #5546: SDF director iterations parameter default of 0 is unfriendly
- Ok I think I understand, I forgot that it's not always explicitly set to something.
So we could presumably fix all th... - 05:48 PM Bug #5546: SDF director iterations parameter default of 0 is unfriendly
- If SDFDirector is used inside a non-toplevel composite
(aka an Opaque Composite), then the number of iterations
is ty... - 05:15 PM Bug #5546: SDF director iterations parameter default of 0 is unfriendly
- Not sure I understand -- which xml files get changed? I wouldn't think we'd want to change existing demo momls, they'...
- 05:08 PM Bug #5546: SDF director iterations parameter default of 0 is unfriendly
- On 8/4/12 10:53 AM, Edward A. Lee wrote:
> Jennifer suggests changing the default iterations count of the SDF
> direc... - 05:31 PM Bug #5416: downloaded modules by Kepler module manager should know the path of main Kepler installation.
- it is fixed based on comment 5 and 6 at version 30378.
- 04:03 PM Bug #5416: downloaded modules by Kepler module manager should know the path of main Kepler installation.
- (In reply to comment #5)
> One problem with your change at r30323 is that it only writes this
> install-path.txt on a... - 03:47 PM Bug #5495: released kepler should allow getting patches and changing suites from command line
- the problem in comment 4 is fixed in version 30376. close this bug.
- 07:13 AM Bug #5266: Two empty boxes inside Sinewave actor and other icon problems for attributes
- Edward writes:
> This sort of bug usually arises from something being
> done outside the Swing event thread that sho...
08/07/2012
- 05:23 PM Bug #5663: KeplerGraphFrame has much duplicated code
- r30371:
Moved org.kepler.gui.KeplerGraphFrameExtension to ptolemy.vergil.basic.BasicGraphFrameExtension.
Removed du... - 04:19 PM Bug #5668 (Resolved): module manager should support batch mode execution.
- a blocker for batch execution support for Kepler module manager. Users should be able to use command line to check wo...
- 04:17 PM Bug #5266: Two empty boxes inside Sinewave actor and other icon problems for attributes
- Hi Sean,
If I were you, I'd focus on the other bug because the Sinewave icon bug may be tricky because Sinewave is an... - 02:48 PM Bug #5266: Two empty boxes inside Sinewave actor and other icon problems for attributes
- I get this behavior under kepler trunk, reporting suite is not needed.
- 04:05 PM Bug #5348: Opening KAR or opening workflow under KAR behaves differently.
- correct new bug id: A further reevaluation bug is created at bug 5667.
- 04:04 PM Bug #5348: Opening KAR or opening workflow under KAR behaves differently.
- close this bug. A further reevaluation bug is created at bug 5348.
- 04:03 PM Bug #5667 (New): reevaluate how opening kars vs. XML should work from actor library.
- currently, opening kar is different from opening xml from actor library (see bug 5348). One more difference is that o...
- 03:55 PM Bug #5489: Module Manager GUI should fail gracefully if a remote module cannot be downloaded
- two ways to reproduce the bug: 1) close internet connection just before downloading start; 2) have a unpublished modu...
- 02:12 PM Bug #5655: sdm spa Repeat is a duplicate of a Ptolemy actor
- Kepler actors/src/org/sdm/spa/Repeat.java has:
public TypedIOPort portOutput;
public TypedIOPort portInput;
... - 01:56 PM Bug #5655: sdm spa Repeat is a duplicate of a Ptolemy actor
- These two actors have different ports and parameters. Ptolemy one has one input port and two parameters; Sdm one has ...
- 11:07 AM Feature #5666 (New): Build system needs a target to build all common or blessed non-core modules
- There should be a way to easily build all the common or "blessed"
non-core modules.
For example, "ant change-to -Ds...
08/06/2012
- 10:14 PM Bug #5660: ExtensionFileFilter is a duplicate of a Ptolemy class
- Dan did most of the work, all I had to do was remove ExtensionFileFilter.java
and update the imports in two locations... - 04:49 PM Bug #5660 (Resolved): ExtensionFileFilter is a duplicate of a Ptolemy class
- ./gui/src/org/kepler/gui/util/ExtensionFileFilter.java
FIXME: This matched ptolemy/src/diva/gui/ExtensionFileFilter.... - 09:55 PM Bug #5661: Remove SwingWorker and use javax.swing.SwingWorker
- I removed util.SwingWorker and updated
authentication-gui/src/org/kepler/authentication/GAMAAuthenticationService.jav... - 08:17 PM Bug #5661: Remove SwingWorker and use javax.swing.SwingWorker
- I've removed ptolemy/src/ptolemy/gui/SwingWorker.java
Unfortunately, org.kepler.gui.ProgressMonitorSwingWorker uses ... - 04:51 PM Bug #5661 (Resolved): Remove SwingWorker and use javax.swing.SwingWorker
- ./util/src/util/SwingWorker.java
FIXME: Remove and use javax.swing.SwingWorker.
See http://docs.oracle.com/javas... - 08:19 PM Bug #5665 (Resolved): modulemanager et al.: swing-worker-1.2.jar should be removed
- bug #5661 is about removing util.SwingWorker.
Unfortunately, there is code that uses a different SwingWorker from ... - 07:44 PM Bug #5648: FileCopier code duplication
- ./core/src/org/kepler/util/FileCopier.java was used by tagging. I've temporarily resurrected it, but into the tagging...
- 04:23 PM Bug #5648 (Resolved): FileCopier code duplication
- FileCopier:
./core/src/org/kepler/util/FileCopier.java - Fixed. Unused code which was removed.
./actors/src/... - 05:01 PM Bug #5664 (New): Check for duplicate code
- See bug #4926 for how to check for duplicate code.
This bug is targeted to 2.5.0 so that we don't forget to do it. - 05:00 PM Bug #4926: Examine Kepler for duplicated Ptolemy code
- To find files that have the same name in both Ptolemy II and Kepler:
Look for duplicate file names:
# Get all the .ja... - 12:02 PM Bug #4926: Examine Kepler for duplicated Ptolemy code
- This should be done for each release in the end. It shouldn't be released if it doesn't meet some metrics or criteria...
- 04:55 PM Bug #5663 (Resolved): KeplerGraphFrame has much duplicated code
- I looked in to why KeplerGraphFrame has so much duplicated code
and it looks like Comad uses KeplerGraphFrameExtensi... - 04:52 PM Bug #5662 (Resolved): resurgence ArrayAccumulator is a duplicate of Ptolemy ArrayAccumulate
- ./actors/src/org/resurgence/actor/ArrayAccumulator.java
Duplicate of ptolemy/src/ptolemy/actor/lib/ArrayAccumulate.j... - 04:45 PM Bug #5659 (Closed): Kepler CaseGraphFrame and CaseGraphTableau have duplicated Ptolemy code.
- ./gui/src/org/kepler/gui/frame/CaseGraphFrame.java
FIXME: Refactor!
Duplicate of ptolemy/src/ptolemy/vergil/... - 04:43 PM Bug #5658 (Resolved): Rename kepler/moml/filter classes so that they don't have the same name as the Ptolemy filter classes
- ./core/src/org/kepler/moml/filter/BackwardCompatibility.java
./core/src/org/kepler/moml/filter/ClassChanges.java
./... - 04:42 PM Bug #5657 (Resolved): kepler moml FileAttribute should probably be a FileParameter
- ./core/src/org/kepler/moml/FileAttribute.java
The Kepler version extends StringAttribute
This matches ptolemy/src... - 04:40 PM Bug #5656 (Resolved): sdm spa StringConst is a duplicate of a Ptolemy actor
- ./actors/src/org/sdm/spa/StringConst.java
FIXME: Deprecate and extend ptolemy/src/ptolemy/actor/lib/StringConst.java - 04:39 PM Bug #5655 (Resolved): sdm spa Repeat is a duplicate of a Ptolemy actor
- ./actors/src/org/sdm/spa/Repeat.java
FIXME: No documentation? If possible, Deprecate and extend
ptolemy/src/ptolem... - 04:38 PM Bug #5654 (Resolved): Geon ArrayRemoveElement is a duplicate of a Ptolemy actor
- ./actors/src/org/geon/ArrayRemoveElement.java
FIXME: Duplicate of ptolemy/src/ptolemy/actor/lib/ArrayRemoveElemen... - 04:36 PM Bug #5653 (Resolved): Geon ArrayContains is a duplicate of a Ptolemy actor
- ./actors/src/org/geon/ArrayContains.java
FIXME: Duplicate of ptolemy/src/ptolemy/actor/lib/ArrayContains.java
... - 04:35 PM Bug #5652 (New): Geon Scp and spa Ssh2Exec have duplicate code.
- Duplicate code detected with CPD. See
actors/src/org/geon/Scp.java line 295
actors/src/org/sdm/spa/Ssh2Exec.j... - 04:33 PM Bug #5651 (Resolved): WebService, WebServiceStub and MessageBasedWebService have duplicate code
- ##########
actors/src/org/sdm/spa/WebService.java line 1094
actors/src/org/sdm/spa/WebServiceStub.java line 52... - 04:31 PM Bug #5650: actors LidarWorkflowExecute and load WorkflowExecute have duplicated code
- Also:
actors/src/org/geon/LidarWorkflowExecute.java line 373
actors/src/org/geon/ModelService.java line 2... - 04:27 PM Bug #5650 (Resolved): actors LidarWorkflowExecute and load WorkflowExecute have duplicated code
- Duplicates detected with CPD. See
http://bugzilla.ecoinformatics.org/show_bug.cgi?id=4926#c1
actors/src/org/ge... - 04:30 PM Bug #5649: opendap/{DapObjectsToToken,TokenManager,TypeManager} are almost identical
- Also:
pendap/src/org/kepler/dataproxy/datasource/opendap/DapObjectsToType.java line 73
o
pendap/src/org/keple... - 04:24 PM Bug #5649 (Resolved): opendap/{DapObjectsToToken,TokenManager,TypeManager} are almost identical
- opendap/src/org/kepler/dataproxy/datasource/opendap/DapObjectsToToken.java line 65
opendap/src/org/kepler/datap... - 03:29 PM Bug #5247: Allow user to set memory allocated to Kepler from within Kepler
- I increased max memory to 1gb at r30353. You will have to delete your existing build-area/settings/memory.xml
- 12:59 PM Bug #5247: Allow user to set memory allocated to Kepler from within Kepler
- Derik will increase the default memory heap size to 1 Gig.
- 01:33 PM Bug #5646 (New): Switching some of the add-on modules to core
- Before 2.5, we need a discussion on switching some of the key modules, e.g., modules in the reporting suite, to the c...
- 01:15 PM Bug #5645 (New): kar uploading should need user account.
- Currently, anonymous users can upload their kars to Kepler kar repository. They could bring malicious actors and be h...
- 12:54 PM Bug #5633: Actor/Attribute Search/Find Facility needs menu choices
- Decided that a search bar will be added to the outline.
- 12:46 PM Bug #5458: Moving between 2.2 and 2.3 and back requires deleting ~/KeplerData
- It is fixed as of 2.3 and this will not happen between 2.3 & 2.4. What could still happen is if you start 2.3 and re...
- 12:37 PM Bug #4281: ant update produces message about running svn cleanup
- This is a bug for developers. A potential fix is a two stage update that copies the file and writes on the copy. Late...
- 12:30 PM Bug #5348: Opening KAR or opening workflow under KAR behaves differently.
- Add a new bug to reevaluate how opening kars vs. XML should work.
- 12:26 PM Bug #5495: released kepler should allow getting patches and changing suites from command line
- Report the small fix and add/link to the 2.5 bug.
- 12:24 PM Bug #5398: Re-install of Kepler-x.y doesn't overwrite modules.txt
- This was a 2.2 bug. It has been solved for 2.3. The behavior right now seems to be ok for 2.4, but the user needs to ...
- 12:15 PM Bug #5487: blank modules.txt files created for non-suite modules
- Needs to be tested and evaluated at the end of release cycle.
- 12:07 PM Bug #5440: special checkout behavior for hardcoded ptolemy module names
- We agree that we will have a special Ptolemy II branch for each Kepler release. The branch should stay in the ptII re...
- 11:40 AM Bug #4068: File Menu should display 5 most recently used workflows
- Decided to change it to be 10 instead of 5.
- 11:38 AM Bug #4908: actor/director/attribute .xml file documentation needs to be updated
- PN needs to be updated for 2.4.
- 11:36 AM Bug #4908: actor/director/attribute .xml file documentation needs to be updated
- A future RFE needs to be issued for a future release to combine the forked pieces. Dan investigated the technical par...
- 11:26 AM Bug #5485: standalone Module Manager can break Kepler app ability to startup
- Not able to reproduce this. Will try more and close it if not reproducible.
- 11:22 AM Bug #5426: workflow lsid changes when running from command line
- Added a command line option to stop it. Closed for 2.4 release. For 2.5, add a new bug with investigation of alternat...
- 11:18 AM Bug #5280: missing command line execution for KAR files
- See http://stackoverflow.com/questions/620993/determining-binary-text-file-type
for ideas about how to detect binary ... - 11:16 AM Bug #5280: missing command line execution for KAR files
- Still need to update the docs and the user manual. Also the text effigy will be updated to not open binaries.
- 11:00 AM Bug #4978: Create additional 'module' property for any menu entries that are inserted by non-core modules
- I briefly tried to reproduce this and was unable (changing to sensor-view suite, changing various add-on module setti...
- 10:56 AM Bug #5416: downloaded modules by Kepler module manager should know the path of main Kepler installation.
- One problem with your change at r30323 is that it only writes this install-path.txt on a new install. A user could su...
Also available in: Atom