Activity
From 03/05/2010 to 04/03/2010
04/02/2010
- 05:39 PM Bug #4927 (Resolved): Don't allow export, upload, delete of executing run in WRM
- The workflow run manager shouldn't allow the export, upload or delete of an executing run.
- 04:14 PM Bug #4926 (Resolved): Examine Kepler for duplicated Ptolemy code
- There are a few files in Kepler that have Edward listed as an author.
I suspect that some of these are duplicated co... - 01:48 PM Bug #4916: Save Archive gives an error
- Aaron thinks this may be tied into work on ActorMetadata necessary for bug#4767. Reassigned to him.
- 01:17 PM Bug #4916: Save Archive gives an error
- After r23539 this is now a problem in 2.0 as well. Retargeting.
I'm guessing the r23539 (2.0) changes to ActorMetada... - 12:59 PM Bug #4916: Save Archive gives an error
- I'll take a look...looks like the error is coming out of the call to parser.reset() in ActorMetadata lookForMoml
- 12:49 PM Bug #4925 (Resolved): Components search occasionally shows different results
- I've been deleting KeplerData, doing a clean-cache, restarting Kepler, and then searching for 'sdf' a lot lately. Eve...
- 12:32 PM Bug #4924 (Resolved): Tagging a run when provenance is off gives errors
- If you try to tag a run in the Workflow Run Manager when provenance is turned off, you get errors.
- 12:29 PM Bug #4793: Workflow Run Manager - clicking on row when provenance is off gives error
- fixed in r23553
04/01/2010
- 11:31 AM Bug #4923: 'Lock' the report layout so that if you switch to another run in the run manager, it doesn't lose the layout that is currently being edited.
- Which ever is easier, so long as it's apparent which state is locked and which is unlocked. On my 10.5 mac, the butto...
- 11:25 AM Bug #4923: 'Lock' the report layout so that if you switch to another run in the run manager, it doesn't lose the layout that is currently being edited.
- I'm just now working on it, will let you know when it's ready to test. The button changes to blue when depressed. C...
- 11:22 AM Bug #4923: 'Lock' the report layout so that if you switch to another run in the run manager, it doesn't lose the layout that is currently being edited.
- This button isn't working for me. I've tried clicking on a run row with the button in either state, and the old repo...
- 10:14 AM Bug #4923 (Resolved): 'Lock' the report layout so that if you switch to another run in the run manager, it doesn't lose the layout that is currently being edited.
- Add a 'LockEditMode' toggle button as a solution to the following problem:
Currently, if the user makes changes to ... - 11:26 AM Bug #4896: When exporting multiple runs only 1 ROML is placed in KAR
- No, doing this (which I think we should), won't solve the issue in bug #4923.
- 10:16 AM Bug #4896: When exporting multiple runs only 1 ROML is placed in KAR
- (In reply to comment #1)
> It looks like this is occurring because ReportLayout lsids don't change when
> they're mod...
03/31/2010
- 05:59 PM Bug #4619: WorkflowRuns not showing inside KARs in library
- this is working again. closing.
- 05:57 PM Bug #4895: Exporting multiple runs gives duplicate entry errors
- this is fixed
- 05:46 PM Bug #4896: When exporting multiple runs only 1 ROML is placed in KAR
- It looks like this is occurring because ReportLayout lsids don't change when they're modified, so when the KAR is bui...
- 04:58 PM Bug #4898: WorkflowRun entityId lsid no longer incrementing after getting tagged
- second part fixed in r23536
- 02:28 PM Bug #4898: WorkflowRun entityId lsid no longer incrementing after getting tagged
- The first problem should be fixed in r23532.
The second problem where WorkflowRuns are getting derivedFrom lsids is s... - 04:31 PM Bug #4230: problem associating errors with particular execution
- changed title -- this isn't particular to the PN director, it can happen with other directors as well.
- 04:03 PM Bug #4230: problem associating errors with particular execution
- I have no updates for this bug.
It will take some effort since it requires changing Ptolemy's Manager and possibly ... - 03:48 PM Bug #4746: ability to create a Site Layout report
- The current reporting system lets the user create a report template, which gets filled in with values generated by wo...
- 03:36 PM Bug #4742: create engineering view model type
- An alternative to putting the engineering view under the File -> New submenu, is to make it a separate view pane. The...
- 03:19 PM Bug #4921 (Resolved): find reports for sensor in site layout
- Make it possible to navigate from a sensor in the site layout view (fig 1) to the corresponding sensor in the workflo...
- 02:49 PM Bug #4920 (New): dynamically change toolbar buttons
- The toolbar buttons displayed (or enabled) should change based on the tab pane focus.
- 02:18 PM Bug #4919 (New): tag removal sends two tagRemoved events through provenance
- If you remove a tag on a run in the Workflow Run Manager, this sends two tagRemoved events through provenance, potent...
- 09:48 AM Bug #4161: Develop kepler workflow execution engine
- Early of March, I installed an execution engine on my local machine. I finished a full a cycle - uploaded a kar file ...
- 07:41 AM Bug #4161: Develop kepler workflow execution engine
- I know in early february I was able to use the commandline to execute a KAR (after some tweaks) and then Josep was un...
03/30/2010
- 07:01 PM Bug #4800: CacheManager can not insert WorkflowRun into cache
- Yes, the solution to use moml as the serialization format to cache instead of a java serialized object seems to be wo...
- 06:24 PM Bug #4800: CacheManager can not insert WorkflowRun into cache
- I believe this is fixed. Aaron, do you consider this fixed with r23291?
- 06:52 PM Bug #4161: Develop kepler workflow execution engine
- Hey Jing and/or Ben, could you give an update on this bug?
- 06:29 PM Bug #4897: Arrow key navigation of Workflow Run Manager can stop working
- Changing to be an ER.
- 06:27 PM Bug #4230: problem associating errors with particular execution
- Dan, any updates for this bug?
- 06:20 PM Bug #4895: Exporting multiple runs gives duplicate entry errors
- This is still a bug. It may get fixed as a result of the changes I'm implementing to fix bug 4898.
- 06:15 PM Bug #4765: semantic annotation doesn't appear until you click on workflow
- This is a minor bug, but annoying.
- 06:13 PM Bug #4663: Tag shows up in workflow moml when it shouldn't
- This is no longer happening. Maybe it was related to the bug in getHighestRevision fixed today in r23525.
- 06:02 PM Bug #4672: Workflow title isn't refreshed during run export workflow rename
- You're no longer prompted to rename an unnamed workflow during a run export. However, the following types of scenario...
- 05:51 PM Bug #4671: cannot export workflow runs when workflow has actors with <> in the names
- This is a general Kepler issue. If we consider it a bug and not an enhancement request, it's a bug in 2.0 and trunk, ...
- 05:37 PM Bug #4361: Workflow Run Manager column "Workflow Name" can be confusing
- Changing this to an enhancement request. This is a general Kepler issue.
Adding a filename column to the WRM could ... - 03:24 PM Bug #4915: PortParameters instantiated from Outline tab cannot be deleted
- No, same problem in both trunk and 2.0.
- 02:53 PM Bug #4915: PortParameters instantiated from Outline tab cannot be deleted
- Please let me know if revision 23524 (in trunk)
and revision 23523 (in 2.0 branch) fix this problem. - 10:45 AM Bug #4915 (Resolved): PortParameters instantiated from Outline tab cannot be deleted
- If you drag a PortParameter to canvas from the Outline tab, it can't then be deleted from canvas. Also, it doesn't se...
- 03:10 PM Bug #4916: Save Archive gives an error
- I just started getting this as well. It results in an inability to instantiate composites returned from remote reposi...
- 03:08 PM Bug #4916 (Resolved): Save Archive gives an error
- File => Save Archive works on the 2.0 branch, but on trunk I'm getting an error (both in wrp and kepler suites):
p... - 02:09 PM Bug #4741: create icons for engineering view components
- The icons must be a certain size so that lines between them are straight. For details see the thread started here (an...
- 01:32 PM Bug #4914: right-clicking on any item in Outline view gives exceptions
- I've removed popups from the outline tab. closing.
- 10:39 AM Bug #4914 (Resolved): right-clicking on any item in Outline view gives exceptions
- If you right click on any item in the Outline view, you get exceptions. This happens in 2.0 and trunk.
To replicat...
03/29/2010
- 11:31 PM Bug #4913: ant change-to -Dsuite=kepler-2.0 checks out ptolemy from the head not the rel-8-0-beta-2 branch
- This is not a build system issue, but instead an issue of how the kepler-2.0 suite is specified.
I have changed modu... - 07:38 PM Bug #4913 (Resolved): ant change-to -Dsuite=kepler-2.0 checks out ptolemy from the head not the rel-8-0-beta-2 branch
- How do I check out the 2.0 branch?
svn co https://code.kepler-project.org/code/kepler/branches/releases/release-br... - 05:37 PM Bug #4912 (Resolved): File => New Workflow => FSM Model and Modal Model don't work
- Trying to open a new blank FSM Model or Modal Model from the Kepler File menu doesn't work in trunk (it does work in ...
- 04:56 PM Bug #4911: org.kepler.gui.RunWithFeedbackChkBoxAction exception message.
- Thanks to Derik's remind, this bug is duplicate of existing bug 4872. I'll close this one.
- 04:38 PM Bug #4911 (Resolved): org.kepler.gui.RunWithFeedbackChkBoxAction exception message.
- Recently, there are always have the following messages in the console when using Kepler trunk or Kepler 2 branch.
... - 02:28 PM Bug #4910 (Resolved): Test module installation system
- Test module installation system.
- 02:15 PM Bug #4909 (New): Actor documentation: updates ignored, duplicate info, how to refer to other actors/models?
- A few comments about the Kepler Actor Documentation system
1. If I update the .xml file for a Director, then pree... - 02:05 PM Bug #4908 (New): actor/director/attribute .xml file documentation needs to be updated
- The kar files include documentation for actors, directors and attributes.
These files need to be checked against t... - 12:43 PM Bug #3071: KAR files should be sent along with workflow to slaves
- In the new KAR specification of the coming Kepler 2.0, KAR files can not include actor classes and jars. So parsing ...
03/25/2010
- 03:39 PM Bug #3694: Sharing installation among users fails, users must have write permission
- I closed to soon, it looks like the non-admin has no actors listed in the palette.
Should this be fixed for 2.0? - 03:15 PM Bug #3694: Sharing installation among users fails, users must have write permission
- This is fixed.
I installed Kepler-2.0-rc1 on a Windows 2003 Server as Administrator.
I can start up Kepler as a non-... - 11:09 AM Bug #4244: Dragging ImageAttribute into Kepler results in not finding the gif
- Closing.
The problem was that dragging certain actors would fail because
resources associated with the actor were not...
03/24/2010
- 06:54 PM Bug #4281: ant update produces message about running svn cleanup
- It looks like ant update fails under Windows 2003 in a clean tree.
The error is:
[update-modules] At revision 57481... - 06:30 PM Bug #3801: open dialog, common places pane has white box instead of text
- I'm reviewing old bugs.
This bug is still present in the devel tree.
The problems is that under Windows 2003, anyth... - 04:57 PM Bug #4804: copy/paste relation changes width from Auto to 1
- Fixed!
The problem was that the RelationWidthChanges filter would set the width to 1
instead of the width remaining A... - 04:21 PM Bug #4669: report layout changes, but text field displays previous content
- This was just getting the text from the wrong place. Fixed now.
- 01:24 PM Bug #4898: WorkflowRun entityId lsid no longer incrementing after getting tagged
- I'm going to look at this.
On a related note, I've discussed making changes to the system so that provenance's workfl... - 12:30 PM Bug #4903 (Resolved): Text in attributes not rendered properly
- In a version of Kepler checked out from the svn tree, I did:
Tools->Instantiate Attribute
and entered
ptolem... - 11:15 AM Bug #4689: Export run creates duplicate WorkflowRun files. Exporting it again gives none.
- Fixed this in r23422.
03/23/2010
- 05:46 PM Bug #4899: Installer Bugs
- Done except for:
9) create exe for windows installer - 04:21 PM Bug #4899: Installer Bugs
- Done except for:
9) create exe for windows installer
13) look into non-versioned dirs in KeplerData (derik) - 02:40 PM Bug #4899: Installer Bugs
- Remaining to be fixed:
9) create exe for windows installer
13) look into non-versioned dirs in KeplerData
15) upda... - 02:31 PM Bug #4899: Installer Bugs
- #15) The Welcome screen has
Kepler 1.x Developer
A collaborative environment for creating and executing scientific ... - 02:23 PM Bug #4899: Installer Bugs
- (In reply to comment #2)
> #13 fixed in r23452 for 2.0 and in r23454 for trunk
Arg, typo. #14 fixed, not #13. - 02:22 PM Bug #4899: Installer Bugs
- #13 fixed in r23452 for 2.0 and in r23454 for trunk
- 10:12 AM Bug #4899: Installer Bugs
- 1) "Please read the following information" screen
"Kepler is based on Ptolemy II version 7.0.2"
change... - 10:07 AM Bug #4899 (Resolved): Installer Bugs
- Tracking bug for 2.0 installer issues.
- 04:11 PM Bug #4894: One slave doesn't respond correctly when having concurrent requests.
- It is fixed at version 23459. SlaveController use a hashmap to contain the slave objects for different masters.
- 01:03 PM Bug #4867: Update screenshots for the documentation
- Chapter 11 is still going to need to be reviewed and updated by Aaron.
- 10:03 AM Bug #4867: Update screenshots for the documentation
- Debi says all screenshots have been updated. David will update the two remaining ones after RC1. Closing this bug.
- 12:46 PM Bug #4885: Right-clicking on KARs in the component pane produces exception
- This works fine now on local kars, closing.
- 11:27 AM Bug #4072: Rework Section 3
- debi did the screenshots in r1194.
i've accepted all changes and closed all comments, and 3.0 is done in r1212.
03/22/2010
- 01:38 PM Bug #3976: Update Documentation for 2.0 release
- The three screenshots in Chapter 12 will have to be re-done once we have published. It should only take a few minutes...
- 01:31 PM Bug #3976: Update Documentation for 2.0 release
- All the screen shots have been updated and links checked. So, I think everything in the documentation is ready to go...
- 11:06 AM Bug #4753: create gui for scheduled execution of sensor workflows on server
- This would be useful for any type of workflow, not just for the Engineering View.
03/19/2010
- 05:51 PM Bug #4898: WorkflowRun entityId lsid no longer incrementing after getting tagged
- Also of note, if you restart Kepler and then use the View Run LSID context menu on such a tagged run, the derivedLSID...
- 05:40 PM Bug #4898 (Resolved): WorkflowRun entityId lsid no longer incrementing after getting tagged
- Looks like after the refactor the WorkflowRun entityId lsid revision no longer gets bumped when a run gets tagged.
... - 05:13 PM Bug #4897 (New): Arrow key navigation of Workflow Run Manager can stop working
- When using the keyboard's arrow keys to move up or down the list of runs in the WRM on the Report Designer tab, when ...
- 05:08 PM Bug #4896 (Resolved): When exporting multiple runs only 1 ROML is placed in KAR
- If you export multiples runs that have different report designs and instances from the Workflow Run Manager, you only...
- 04:10 PM Bug #4895 (Resolved): Exporting multiple runs gives duplicate entry errors
- Exporting multiple runs from the Workflow Run Manager gui sometimes gives a series of duplicate entry error messages ...
- 03:05 PM Bug #4517: Verify that the search capabilities work
- Aaron clarify the issue:
on the search result panel, right clicking the kar entry will bring a menu. One menu item i... - 01:19 PM Bug #4517: Verify that the search capabilities work
- It's probably Kepler keeping you from running a workflow without a top-level directory. Put a PN or SDF directory in ...
- 12:21 PM Bug #4517: Verify that the search capabilities work
- In this case, the kar file only has a composite actor at the result panel. Actually, I saved a workflow to the kar fi...
- 11:53 AM Bug #4517: Verify that the search capabilities work
- You should be able to drag the contents of the kar file. If the kar file doesn't have anything in it, then there is ...
- 11:37 AM Bug #4517: Verify that the search capabilities work
- Chad:
What can we do to the kar search result? How can we open it?
Thanks,
Jing - 11:26 AM Bug #4517: Verify that the search capabilities work
- I don't think you're supposed to be able to drag the kar to the canvas. It's just a container.
- 11:25 AM Bug #4517: Verify that the search capabilities work
- I saved a workflow into local repository as a kar file. The search it on the components panel. The result shows:
Wor... - 01:45 PM Bug #4894 (Resolved): One slave doesn't respond correctly when having concurrent requests.
- When two running workflow are requesting concurrently to one slave, the executions will be twisted. Usually only one ...
- 01:28 PM Bug #4462: Component search in remote repositories not working
- Personally, Aaron, I agree with you. I'll look into reorganizing the tree. Ben, Chad or others, let me know if you ar...
- 01:21 PM Bug #4462: Component search in remote repositories not working
- Sorry I wasn't following that thread... My input would be that if the search results are going to be displayed in th...
- 01:17 PM Bug #4462: Component search in remote repositories not working
- I sent out an email about this a week ago. Ben and Chad thought this (semantic types under a KAR file) would be clear...
- 12:03 PM Bug #4462: Component search in remote repositories not working
- Also Sean, I don't think it makes sense to have the ontology hierarchy inside of the KAR search results. Can you ret...
- 11:59 AM Bug #4462: Component search in remote repositories not working
- ummmm, the filename gets lost in metacat somewhere? You should just display the filename of the KAR file in the sear...
- 11:30 AM Bug #4462: Component search in remote repositories not working
- Yes, I'm aware of that odd naming convention. The problem is, the KARs themselves don't have any other name on the re...
- 11:27 AM Bug #4462: Component search in remote repositories not working
- sean:
After searching the remote repository, the search result shows the docid, such as 8128:69:1 rather than the ka... - 12:01 PM Bug #4869: changes made to workflows during dialogs before committing (Edit Parameters/Cancel)
- Moving this bug to 2.x. It is not realistic to fix this for 2.0.
- 10:42 AM Bug #4759: install dataturbine on gumstix
- Done. Instructions can be found here:
https://kepler-project.org/developers/incubation/kepler-engineering-view-for-r...
03/18/2010
- 04:21 PM Bug #4888: Runs with 1 error don't highlight red in WRM
- Did a couple quick tests and it works here, thanks. Nothing to check into the branch since r23398 is just changes to ...
- 03:47 PM Bug #4888: Runs with 1 error don't highlight red in WRM
- I think it's better now after revision 23398 in trunk, let me know if that works and I'll check it into the branch as...
- 01:13 PM Bug #4888: Runs with 1 error don't highlight red in WRM
- When is setErrorMessages() called after a run? Looks like the WRM is refreshed with WorkflowRun objects constructed ...
- 12:51 PM Bug #4888: Runs with 1 error don't highlight red in WRM
- Sure. Open a blank worflow and hit run. This will cause one error, yet the run row won't be highlighted red.
- 12:46 PM Bug #4888: Runs with 1 error don't highlight red in WRM
- Can you describe how to reproduce the bug.
- 01:58 PM Bug #3073: Heartbeat function for slaves
- Either EcoGrid registry or Master should check the heartbeats from slaves. But the services at EcoGrid are to respond...
- 01:46 PM Bug #4893: WRP Kepler Frame vertically fills entire screen
- I will take a look at this one.
- 12:56 PM Bug #4893 (Resolved): WRP Kepler Frame vertically fills entire screen
- On Windows XP with a screen resolution of 1600x1200 pixels, a new Kepler Frame (in WRP suite) stretches all the way f...
03/17/2010
- 04:00 PM Bug #4888 (Resolved): Runs with 1 error don't highlight red in WRM
- Looks like the code for dealing with errors is a little broken after the recent refactor of WorkflowRun: Runs with 1 ...
- 03:31 PM Bug #3070: Need access control GUI for slaves
- It is fixed at version 23388. With user access dialog, user access rule can be dynamically configured from GUI.
- 03:15 PM Bug #4887 (New): If a module is added to a configuration, the error message should include the fix
- Apparently, the dataturbine module was added to the kepler trunk.
After doing
ant update
ant run
I got:
run:... - 10:59 AM Bug #4884: Trying to log into IPCC anonymously causes Kepler to freeze, and require a force quit.
- I just tried this under various circumstances and was not able to get it to crash. I'm going to close this for now, ...
03/16/2010
- 04:31 PM Bug #4884: Trying to log into IPCC anonymously causes Kepler to freeze, and require a force quit.
- Could have been because I did have several workflows open ? I just tried it now, and was successful. Maybe we can c...
- 12:56 PM Bug #4884: Trying to log into IPCC anonymously causes Kepler to freeze, and require a force quit.
- Just tried this in the 2.0 branch and it worked for me. Debi, were there any other circumstances that could have con...
- 12:15 PM Bug #4884: Trying to log into IPCC anonymously causes Kepler to freeze, and require a force quit.
- On wrp trunk on mac 10.5 with kepler launched from eclipse with VM arg: -Xmx1500m, I have all datasources selected ex...
- 12:06 PM Bug #4884: Trying to log into IPCC anonymously causes Kepler to freeze, and require a force quit.
- I just tried to search "IPCC" on data tab (logged in anonymously), it worked fine to me. Can someone else make a try?
- 11:51 AM Bug #4884 (Resolved): Trying to log into IPCC anonymously causes Kepler to freeze, and require a force quit.
- If you do a search from the data tab for 'IPCC' and then try to log in anonymously, it looks like it is trying to con...
- 04:16 PM Bug #4761: install and configure SPAN software on gumstix
- Derik and I visited the SPAN group on March 8; they installed their software on our gumstix. Using CRBasic programs w...
- 02:35 PM Bug #4885 (Resolved): Right-clicking on KARs in the component pane produces exception
- This bug is there as of r23368.
Stacktrace follows:
[run] java.lang.Exception: LIID not found for CoreAct... - 01:54 PM Bug #3069: start slave from gui
- It is fixed at Kepler trunk version 23363. Slave will be started when using startSlave or startSlaveAsyn commands or ...
- 01:52 PM Bug #3068: rmiregistry should be started programmatically
- It is fixed at Kepler trunk version 23363. rmi registry will be done automatically when using startSlave or startSlav...
- 12:52 PM Bug #4864: Update paths in demo workflows
- All demo workflows have been updated. There is now a system property DEMODIR that can be used in workflows to get th...
03/15/2010
- 04:28 PM Bug #4517: Verify that the search capabilities work
- The debug message has gone when I tried to reproduced the issue on comment 3. I tried both kepler 2.0 and trunk. Ben ...
- 03:34 PM Bug #4883: Need more command line options for kar files
- created a stopgap soln in r23358 -- for headless for runs of kars, now writing resultant "run-kar" into KeplerData/wo...
- 01:51 PM Bug #4883 (New): Need more command line options for kar files
- right now, we can execute a single workflow contained in a kar file with the -runwf command line switch. It would be...
- 03:32 PM Bug #4744: load & save site layout to local kar file
- additional items to save in KAR: CRBasic program, SPAN config files
- 03:29 PM Bug #4743: create gui to edit documentation metadata for component
- It would be good to review the interfaces on the following web page when designing this interface:
https://kepler-pr... - 01:07 PM Bug #4745: load & save site layout to metacat
- save to metacat instead of dataturbine?
03/13/2010
- 04:34 PM Bug #4832: python actor outputting to disconnected composite output throws error
- This might be a bug in provenance. I'll take a look.
- 08:09 AM Bug #4832: python actor outputting to disconnected composite output throws error
- I took a look at this and confirmed that it is not a problem in Ptolemy or Kepler, but is reproducible in after doing...
03/12/2010
- 03:20 PM Bug #4877: The provenance recorder and tagging buttons on the toolbar need tooltips
- Fixed in r23341.
- 03:13 PM Bug #4773: Data processing on the GPP
- Also, part of the SPAN stack can do processing / QA/QC. To what extent do we want to utilize this? I currently consid...
- 02:01 PM Bug #4333: KeplerLSID AuthNamespace web service
- (In reply to comment #5)
> Alright https://kepler-project.org/ns/
> now works.
>
> http://library.kepler-project.or... - 12:51 PM Bug #4333: KeplerLSID AuthNamespace web service
- Alright https://kepler-project.org/ns/
now works.
http://library.kepler-project.org/ns/
is still returning an error... - 01:57 PM Bug #4847: Instantiating new actor from library gives error after restart
- Unable to reproduce this bug in the 2.0 branch and my Mac. Please reopen if you're still seeing it.
- 01:41 PM Bug #4072: Rework Section 3
- only thing left now is updating the screenshots.
- 01:40 PM Bug #4852: Documentation => Remove Customization doesn't work
- fixed in r23336 (trunk) and r23339 (2.0).
- 11:01 AM Bug #4872: listen to director throws error
- Oh, and it doesn't seem to cause any serious problems.
- 11:00 AM Bug #4872: listen to director throws error
- I'm also seeing something like this when I run, sometimes. I get:
java.lang.reflect.InvocationTargetException
... - 10:53 AM Bug #4881 (New): RExpression outputs [false] for any matrix of booleans
- In an RExpression, add an output port "out" and use this R script:
out <- matrix(c(TRUE, FALSE, TRUE, FALSE), 2)
... - 10:45 AM Bug #4880 (New): RExpression cannot output matrix of strings
- Create an RExpression with the output port "out" and for the script, use:
out <- matrix(letters, 2)
Looking at... - 10:37 AM Bug #4879 (New): RExpression replaces ) in string vectors with } when outputting to a port
- In an RExpression, create the output port "out" and in the R script, use:
out <- c("(", ")")
Hooking this to a...
03/11/2010
- 06:38 PM Bug #4852: Documentation => Remove Customization doesn't work
- I've got a local fix for this that seems to be working pretty well. I'm going to test it some more before check in.
- 05:16 PM Bug #4333: KeplerLSID AuthNamespace web service
- I've added
https://kepler-project.org/ns/
and
http://library.kepler-project.org/ns/
to the Kepler configuration in... - 04:31 PM Bug #4333: KeplerLSID AuthNamespace web service
- Added the namespace number generator jsp to the kepler skin in metacat at:
/style/skins/kepler/keplerAuthNamespac... - 03:27 PM Bug #4333: KeplerLSID AuthNamespace web service
- So
kepler-project.org
is the plone site, and metacat is on
library.kepler-project.org
If we drop the jsp page into t... - 04:37 PM Bug #4848: only first change to Customize Documentation shown in Documentation=>Display
- Thanks Christopher. I updated kepler trunk to use ptolemy r57481 and made the required change to uiContextMenuMapping...
- 03:57 PM Bug #4848: only first change to Customize Documentation shown in Documentation=>Display
- This bug:
Get Documentation on actor ports can give an NPE
https://chess.eecs.berkeley.edu/bugzilla/show_bug.cgi?i... - 04:29 PM Bug #4076: Rework Section 7
- With the Jargon.jar in Kepler, it can communicate with different SRB version. Since SRB has not been updated for two ...
- 04:25 PM Bug #4076: Rework Section 7
- update section 7 to explain more about SRB actors, which are still working when the host and resource server are runn...
- 04:18 PM Bug #4877 (Resolved): The provenance recorder and tagging buttons on the toolbar need tooltips
- The provenance recorder and tagging buttons, that are only present in certain suites, need tooltips like the other UI...
- 03:25 PM Bug #4876 (New): RExpression - recursively handle arrays
- Currently you can only have a list of lists - it would be nice to handle the Token->R->Token conversion recursively s...
- 03:14 PM Bug #4864: Update paths in demo workflows
- The installer now places the demos in ~/KeplerData/Kepler-2.0.0/demos. Paths should be updated to reflect that locat...
- 01:48 PM Bug #4869: changes made to workflows during dialogs before committing (Edit Parameters/Cancel)
- Edward and I talked about this and he reminded me that changes are actually
committed as you move between fields. I... - 11:39 AM Bug #4869: changes made to workflows during dialogs before committing (Edit Parameters/Cancel)
- > This happens when you just run Vergil:
> -drag a StringConst actor to the stage
> -edit the actor params
> -type so... - 10:22 AM Bug #4869: changes made to workflows during dialogs before committing (Edit Parameters/Cancel)
- Christopher,
The _handleClosing() method in ptolemy.actor.gui.EditParametersDialog
does not restore the values of ... - 10:08 AM Bug #4869: changes made to workflows during dialogs before committing (Edit Parameters/Cancel)
- It looks like there is some oddness in Vergil with edit parameters.
I'll see about taking a look. - 01:21 PM Bug #4873: Actors in repository library subtree are crammed together
- Roger that, works well, closing.
- 10:32 AM Bug #4873: Actors in repository library subtree are crammed together
- You probably know this, but you can use System.getProperty("os.name"); to fine the current OS for switching stuff lik...
03/10/2010
- 06:16 PM Bug #4869: changes made to workflows during dialogs before committing (Edit Parameters/Cancel)
- This happens when you just run Vergil:
-drag a StringConst actor to the stage
-edit the actor params
-type some value... - 04:16 PM Bug #4869: changes made to workflows during dialogs before committing (Edit Parameters/Cancel)
- You can get into trouble if you Edit the actor parameters then press other buttons (other than Cancel and Commit):
-H... - 02:41 PM Bug #4869: changes made to workflows during dialogs before committing (Edit Parameters/Cancel)
- from conf. call:
-verify that "cancel" does work for all normal cases
-isolate the sequence that caused the changes t... - 09:59 AM Bug #4869: changes made to workflows during dialogs before committing (Edit Parameters/Cancel)
- It's that attributeChanged() method - I know the EML actor does a lot of things in that method, and I remember it bei...
- 04:55 PM Bug #4873: Actors in repository library subtree are crammed together
- I've added 2 pixels to the rowHeight of the AnnotatedPTree class. Now it would be nice to toggle this based on OS...
- 03:23 PM Bug #4874 (Resolved): Modify existing KARFile schema for use with KAR File Parser
- Currently, we have a simple KARFile schema, but it needs to be modified so that it can be used with the KAR File Pars...
- 02:24 PM Bug #4517: Verify that the search capabilities work
- Need to look at the print out on the console when we search and download data on ecogrid.
- 02:00 PM Bug #4072: Rework Section 3
- in r1179 - finished going through all of this section, fixed some typos, figure numbers and so forth. All that's left...
- 01:53 PM Bug #4684: Release tracking bug
- Closing this bug because the current 2.0 targeted bugs are the release bugs.
- 01:51 PM Bug #4070: Rework Section 1 and the GSG
- Chapter 1 and the GSG are now updated.
- 01:04 PM Bug #4868: Update R paths in documentation and demos
- Just noticed that the GSG also uses workflows with RExpression actors (00-StatisticalSummary and 05-LinearRegression)...
- 11:19 AM Bug #4872: listen to director throws error
- This also happens when you use these context menus:
Open Actor
Documentation => Display
Listen to Actor
I'm also n... - 04:17 AM Bug #4858: Open Actor on non-composite actors no longer works
- Fixed. The problem was actually occurring at both the trunk and the 2.0 branch on a fresh checkout. Which makes sense.
03/09/2010
- 07:59 PM Bug #4858: Open Actor on non-composite actors no longer works
- Christopher's comment#9 works for me (beneath, and adjusting for, the trunk with the wrp suite, at least). However if...
- 05:47 PM Bug #4070: Rework Section 1 and the GSG
- I updated the future goals section, corrected the contributors list, and made additional edits throughout. Chad -- I...
- 04:26 PM Bug #4681: Check all file properties before release
- Yep, svn:keywords and svn:style for all files:
bash-3.2$ svn proplist README.txt
Properties on 'README.txt':
svn:ke... - 04:13 PM Bug #4681: Check all file properties before release
- Which properties should we set? I propose keywords and eol-style as Derik said. Are there any others? I can write ...
- 04:10 PM Bug #4803: Review the README file
- Contributor list has been updated. All info in the README is now up to date. Version numbers need to be updated on ...
- 04:08 PM Bug #4685: Create installers
- Win/OSX/Lin Installers are now working and revised for the 2.0 release. Just version numbers (beta/rc/etc) need to b...
- 04:05 PM Bug #4859: GDALTranslate does not work on Windows 7 (64bit)
- Pushing this to post 2.0 since I think it affects a small number of users. I don't think this should hold up the 2.0...
- 03:53 PM Bug #4873 (Resolved): Actors in repository library subtree are crammed together
- On Windows XP (maybe on other versions of windows) the actor icons are crammed tightly together when you open up Acto...
03/08/2010
- 03:19 PM Bug #4864: Update paths in demo workflows
- I updated $Kepler\outreach-2.0\resources\demos\getting-started\03-ImageDisplay.xml to fit the new directory name for ...
- 01:10 PM Bug #4859: GDALTranslate does not work on Windows 7 (64bit)
- Yes. But for the moment it has to take second place to meeting our own rather extreme schedule commitments. I think...
- 12:42 PM Bug #4859: GDALTranslate does not work on Windows 7 (64bit)
- Sounds good. Thanks, Tom. Would you consider creating a new GDAL module for kepler? If so, we would be willing to ...
- 11:36 AM Bug #4859: GDALTranslate does not work on Windows 7 (64bit)
- OK. We're in the process of building the new suite of java language bindings now. We've gotten them to compile on a...
- 11:20 AM Bug #4859: GDALTranslate does not work on Windows 7 (64bit)
- Hi Tom, The instructions for building gdal in windows are here:
http://trac.osgeo.org/gdal/wiki/GdalOgrInJavaBuildIns... - 05:45 AM Bug #4859: GDALTranslate does not work on Windows 7 (64bit)
- Apologies for the delay. I've been travelling.
We obviously have the requisite hardware and can compile the GDAL C ... - 11:22 AM Bug #4070: Rework Section 1 and the GSG
- This bug can be closed once Matt has edited the future goals section of chapter 1.
03/05/2010
- 02:19 PM Bug #4872: listen to director throws error
- I believe this is more general; I've seen this error periodically lately when using other context menus.
- 02:14 PM Bug #4872 (Resolved): listen to director throws error
- Add an SDF Director and the Tools->Listen to Director. An error pops up on the console:
Error creating action fo... - 12:29 PM Bug #4859: GDALTranslate does not work on Windows 7 (64bit)
- GDAL requires Microsoft Visual C++ to compile:
http://trac.osgeo.org/gdal/wiki/GdalOgrInJavaBuildInstructions
I don... - 11:25 AM Bug #4070: Rework Section 1 and the GSG
- Getting Started Guide is complete.
- 11:13 AM Bug #4070: Rework Section 1 and the GSG
- I checked out chapter 1. We need to update section 1.4 with new future goals of kepler. I've asked Matt if he might...
- 08:00 AM Bug #4070: Rework Section 1 and the GSG
- I think we can close this bug, but Chad can you look it over before I do ?
Thanks.
Also available in: Atom